← Commit history

lm5160qpwprq1: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·e82ccf2ff7 · ·parent ab5b652
1 file changed +117−1
page.json+117−1
@@ -33,5 +33,121 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "LM5160QPWPRQ1",+    "manufacturer": "Texas Instruments",+    "package": "HTSSOP-14-EP",+    "pin_count": 15,+    "category": "DC-DC Converters",+    "datasheet": "https://www.ti.com/lit/ds/symlink/lm5160qpwprq1.pdf",+    "parts": {+      "symbol": "lm5160qpwprq1.kicad_sym",+      "footprint": "lm5160qpwprq1.kicad_mod",+      "model_3d": "lm5160qpwprq1-etched.glb",+      "model_3d_plain": "lm5160qpwprq1.glb",+      "model_3d_step": "lm5160qpwprq1-etched.step",+      "model_3d_step_plain": "lm5160qpwprq1.step",+      "lbr": "lm5160qpwprq1.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog Ground. Ground connection of internal control circuits. Should be tied to the exposed thermal pad and to the PCB ground plane."+      },+      {+        "number": "2",+        "name": "PGND",+        "type": "power_in",+        "description": "Power Ground. Ground connection of the internal low-side synchronous rectifier FET; carries the switching current return."+      },+      {+        "number": "3",+        "name": "VIN",+        "type": "power_in",+        "description": "Input supply connection. Operating input voltage range is 4.5 V to 65 V (absolute max 70 V). Requires local input decoupling capacitance."+      },+      {+        "number": "4",+        "name": "EN/UVLO",+        "type": "input",+        "description": "Precision enable / undervoltage lockout comparator input. Used to enable the converter and to set the input UVLO threshold and hysteresis via an external resistor divider from VIN."+      },+      {+        "number": "5",+        "name": "RON",+        "type": "input",+        "description": "On-time programming pin. A resistor between this pin and VIN sets the switch on-time as a function of input voltage, producing nearly constant switching frequency up to 1 MHz."+      },+      {+        "number": "6",+        "name": "SS",+        "type": "input",+        "description": "Soft-start. Connect a capacitor from SS to AGND to control the output voltage rise time at start-up and limit inrush/overshoot."+      },+      {+        "number": "7",+        "name": "NC",+        "type": "unconnected",+        "description": "No Connection. Leave floating or tie to AGND per layout guidelines."+      },+      {+        "number": "8",+        "name": "FPWM",+        "type": "input",+        "description": "Forced PWM logic input pin. Tie to AGND for discontinuous conduction mode (DCM) at light load for higher efficiency; tie to VCC for continuous conduction mode (CCM) at all loads (required for Fly-Buck configuration). Absolute max 14 V."+      },+      {+        "number": "9",+        "name": "FB",+        "type": "input",+        "description": "Feedback input of the voltage regulation comparator. Connect the output voltage divider tap here; internal reference gives ±1% regulation."+      },+      {+        "number": "10",+        "name": "VCC",+        "type": "power_out",+        "description": "Internal high-voltage start-up regulator bypass capacitor pin. Provides the internal bias rail (nominal ~7 V, absolute max 14 V); bypass to AGND with a ceramic capacitor. Do not load externally beyond datasheet limits."+      },+      {+        "number": "11",+        "name": "BST",+        "type": "power_in",+        "description": "Bootstrap capacitor pin for the high-side buck FET gate driver. Connect a capacitor between BST and SW (typ. 0.1 µF). Absolute max 14 V above SW, 84 V above AGND."+      },+      {+        "number": "12",+        "name": "SW",+        "type": "power_out",+        "description": "Switch node. Source of the high-side buck FET and drain of the low-side synchronous rectifier FET. Connects to the external inductor; carries the switching waveform."+      },+      {+        "number": "13",+        "name": "SW",+        "type": "power_out",+        "description": "Switch node (duplicate of pin 12). Source of the high-side buck FET and drain of the low-side synchronous rectifier FET."+      },+      {+        "number": "14",+        "name": "NC",+        "type": "unconnected",+        "description": "No Connection. Leave floating or tie to AGND per layout guidelines."+      },+      {+        "number": "15",+        "name": "EP",+        "type": "power_in",+        "description": "Exposed thermal pad on the underside of the HTSSOP package. Connect to AGND and to the PCB ground plane to improve power dissipation; this is the primary thermal path."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}