← Commit history
Publish 0.1.1
4 files changed
+633−11
lm5160qpwprq1-hero.glbadded⋯ 1 unchanged line ⋯
lm5160qpwprq1-hero.overlay.jsonadded+444@@ -0,0 +1,444 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "LM5160QPWPRQ1",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 18,+ "span_mm": 7.4,+ "dash_mm": 0.185,+ "gap_mm": 0.111,+ "pad_stroke_mm": 0.0444+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 14,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.588,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -2.75,+ 2.75,+ -2.075,+ 2.075+ ],+ "pads_bbox_mm": [+ -3.675,+ 3.675,+ -2.175,+ 2.175+ ],+ "seating_z_mm": -0.0+ },+ "sources": {+ "glb": "lm5160qpwprq1-etched.glb",+ "glb_sha256": "5a0ae3d7d5ad8ba1e25a6d9155bf80dd43976843b32246d92839d3ec171fe1a7",+ "footprint": "lm5160qpwprq1.kicad_mod",+ "footprint_sha256": "e0e79e2ebe90cbdd272ad5a2f200d4c89d57046613334574a2b5cc21b98d22ed",+ "pins": "page.json component.pins",+ "pins_sha256": "fdf923334fe43bd7f82d383e4a27a304cdc1bd997a2cc21a2d48299831912852"+ },+ "generator": "adom-wiki 1.8.25 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "AGND",+ "x": -3.775,+ "y": -1.95,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "2",+ "text": "PGND",+ "x": -3.775,+ "y": -1.3,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "3",+ "text": "VIN",+ "x": -3.775,+ "y": -0.65,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "4",+ "text": "EN/UVLO",+ "x": -3.775,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "5",+ "text": "RON",+ "x": -3.775,+ "y": 0.65,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "6",+ "text": "SS",+ "x": -3.775,+ "y": 1.3,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "7",+ "text": "NC",+ "x": -3.775,+ "y": 1.95,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "8",+ "text": "FPWM",+ "x": 3.775,+ "y": 1.95,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "9",+ "text": "FB",+ "x": 3.775,+ "y": 1.3,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "10",+ "text": "VCC",+ "x": 3.775,+ "y": 0.65,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "11",+ "text": "BST",+ "x": 3.775,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "12",+ "text": "SW",+ "x": 3.775,+ "y": -0.65,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "13",+ "text": "SW",+ "x": 3.775,+ "y": -1.3,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "14",+ "text": "NC",+ "x": 3.775,+ "y": -1.95,+ "align": "left",+ "vertical": false,+ "h": 0.325+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "rect",+ "center_mm": [+ -2.95,+ -1.95+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "rect",+ "center_mm": [+ -2.95,+ -1.3+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "rect",+ "center_mm": [+ -2.95,+ -0.65+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "rect",+ "center_mm": [+ -2.95,+ 0.0+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "rect",+ "center_mm": [+ -2.95,+ 0.65+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "rect",+ "center_mm": [+ -2.95,+ 1.3+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "rect",+ "center_mm": [+ -2.95,+ 1.95+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "rect",+ "center_mm": [+ 2.95,+ 1.95+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "rect",+ "center_mm": [+ 2.95,+ 1.3+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "rect",+ "center_mm": [+ 2.95,+ 0.65+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "rect",+ "center_mm": [+ 2.95,+ 0.0+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "rect",+ "center_mm": [+ 2.95,+ -0.65+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "rect",+ "center_mm": [+ 2.95,+ -1.3+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "rect",+ "center_mm": [+ 2.95,+ -1.95+ ],+ "size_mm": [+ 1.45,+ 0.45+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "rect",+ "center_mm": [+ -0.75,+ -0.9+ ],+ "size_mm": [+ 1.5,+ 1.8+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "rect",+ "center_mm": [+ -0.75,+ 0.9+ ],+ "size_mm": [+ 1.5,+ 1.8+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "rect",+ "center_mm": [+ 0.75,+ -0.9+ ],+ "size_mm": [+ 1.5,+ 1.8+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "rect",+ "center_mm": [+ 0.75,+ 0.9+ ],+ "size_mm": [+ 1.5,+ 1.8+ ],+ "rot": 0.0+ }+ ]+}
package.json+181−4@@ -1,6 +1,6 @@ { "slug": "lm5160qpwprq1",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Texas Instruments DC-DC Converters, HTSSOP-14-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,183 @@ "docs/hero.png", "docs/lm5160qpwprq1-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "lm5160qpwprq1-etched.step",+ "lm5160qpwprq1-hero.glb",+ "lm5160qpwprq1-hero.overlay.json"+ ],+ "component": {+ "mpn": "LM5160QPWPRQ1",+ "manufacturer": "Texas Instruments",+ "package": "HTSSOP-14-EP",+ "pin_count": 15,+ "category": "DC-DC Converters",+ "datasheet": "https://www.ti.com/lit/ds/symlink/lm5160qpwprq1.pdf",+ "parts": {+ "symbol": "lm5160qpwprq1.kicad_sym",+ "footprint": "lm5160qpwprq1.kicad_mod",+ "model_3d": "lm5160qpwprq1-hero.glb",+ "model_3d_plain": "lm5160qpwprq1.glb",+ "model_3d_step": "lm5160qpwprq1-etched.step",+ "model_3d_step_plain": "lm5160qpwprq1.step",+ "lbr": "lm5160qpwprq1.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "AGND",+ "type": "power_in",+ "description": "Analog Ground. Ground connection of internal control circuits. Should be tied to the exposed thermal pad and to the PCB ground plane."+ },+ {+ "number": "2",+ "name": "PGND",+ "type": "power_in",+ "description": "Power Ground. Ground connection of the internal low-side synchronous rectifier FET; carries the switching current return."+ },+ {+ "number": "3",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply connection. Operating input voltage range is 4.5 V to 65 V (absolute max 70 V). Requires local input decoupling capacitance."+ },+ {+ "number": "4",+ "name": "EN/UVLO",+ "type": "input",+ "description": "Precision enable / undervoltage lockout comparator input. Used to enable the converter and to set the input UVLO threshold and hysteresis via an external resistor divider from VIN."+ },+ {+ "number": "5",+ "name": "RON",+ "type": "input",+ "description": "On-time programming pin. A resistor between this pin and VIN sets the switch on-time as a function of input voltage, producing nearly constant switching frequency up to 1 MHz."+ },+ {+ "number": "6",+ "name": "SS",+ "type": "input",+ "description": "Soft-start. Connect a capacitor from SS to AGND to control the output voltage rise time at start-up and limit inrush/overshoot."+ },+ {+ "number": "7",+ "name": "NC",+ "type": "unconnected",+ "description": "No Connection. Leave floating or tie to AGND per layout guidelines."+ },+ {+ "number": "8",+ "name": "FPWM",+ "type": "input",+ "description": "Forced PWM logic input pin. Tie to AGND for discontinuous conduction mode (DCM) at light load for higher efficiency; tie to VCC for continuous conduction mode (CCM) at all loads (required for Fly-Buck configuration). Absolute max 14 V."+ },+ {+ "number": "9",+ "name": "FB",+ "type": "input",+ "description": "Feedback input of the voltage regulation comparator. Connect the output voltage divider tap here; internal reference gives ±1% regulation."+ },+ {+ "number": "10",+ "name": "VCC",+ "type": "power_out",+ "description": "Internal high-voltage start-up regulator bypass capacitor pin. Provides the internal bias rail (nominal ~7 V, absolute max 14 V); bypass to AGND with a ceramic capacitor. Do not load externally beyond datasheet limits."+ },+ {+ "number": "11",+ "name": "BST",+ "type": "power_in",+ "description": "Bootstrap capacitor pin for the high-side buck FET gate driver. Connect a capacitor between BST and SW (typ. 0.1 µF). Absolute max 14 V above SW, 84 V above AGND."+ },+ {+ "number": "12",+ "name": "SW",+ "type": "power_out",+ "description": "Switch node. Source of the high-side buck FET and drain of the low-side synchronous rectifier FET. Connects to the external inductor; carries the switching waveform."+ },+ {+ "number": "13",+ "name": "SW",+ "type": "power_out",+ "description": "Switch node (duplicate of pin 12). Source of the high-side buck FET and drain of the low-side synchronous rectifier FET."+ },+ {+ "number": "14",+ "name": "NC",+ "type": "unconnected",+ "description": "No Connection. Leave floating or tie to AGND per layout guidelines."+ },+ {+ "number": "15",+ "name": "EP",+ "type": "power_in",+ "description": "Exposed thermal pad on the underside of the HTSSOP package. Connect to AGND and to the PCB ground plane to improve power dissipation; this is the primary thermal path."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "distributor_links": {+ "lcsc": "C524318",+ "digikey": "296-42408-2-ND",+ "mouser": "595-LM5160QPWPRQ1"+ },+ "distributor_check": {+ "checked_at": "2026-10-05T19:04:48Z",+ "source": "Component Ocean /api/assign-pns + lcsc_map",+ "digikey": {+ "pn": "296-42408-2-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-LM5160QPWPRQ1",+ "status": "found"+ }+ },+ "models_3d": [+ {+ "file": "lm5160qpwprq1.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 5.5,+ 4.5,+ 1.6+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "159bde8ae62aee3ed827ac9ee8a52e8fcb2fcb51f8b8deba81c2213de6f24c86",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lm5160qpwprq1-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 5.5,+ 4.5,+ 1.6+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "31fc28a95d88e94d620253e45c18334ff9320e69edd3cf75192e68569becbfbf",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public"+}
page.json+8−7@@ -1,6 +1,6 @@ { "slug": "lm5160qpwprq1",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Texas Instruments DC-DC Converters, HTSSOP-14-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -25,11 +25,11 @@ "docs/lm5160qpwprq1-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "lm5160qpwprq1-etched.step"+ "lm5160qpwprq1-etched.step",+ "lm5160qpwprq1-hero.glb",+ "lm5160qpwprq1-hero.overlay.json" ],- "visibility": {- "public": true- },+ "visibility": "public", "author": { "name": "Ray" },@@ -205,5 +205,6 @@ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]- }-}+ },+ "org": "adom"+}