← Commit history
README.mdadded+56@@ -0,0 +1,56 @@+# LM5160QPWPRQ1++**Texas Instruments** · DC-DC Converters · HTSSOP-14-EP++LM5160QPWPRQ1 from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | AGND | power_in | Analog Ground. Ground connection of internal control circuits. Should be tied to the exposed thermal pad and to the PCB ground plane. |+| 2 | PGND | power_in | Power Ground. Ground connection of the internal low-side synchronous rectifier FET; carries the switching current return. |+| 3 | VIN | power_in | Input supply connection. Operating input voltage range is 4.5 V to 65 V (absolute max 70 V). Requires local input decoupling capacitance. |+| 4 | EN/UVLO | input | Precision enable / undervoltage lockout comparator input. Used to enable the converter and to set the input UVLO threshold and hysteresis via an external resistor divider from VIN. |+| 5 | RON | input | On-time programming pin. A resistor between this pin and VIN sets the switch on-time as a function of input voltage, producing nearly constant switching frequency up to 1 MHz. |+| 6 | SS | input | Soft-start. Connect a capacitor from SS to AGND to control the output voltage rise time at start-up and limit inrush/overshoot. |+| 7 | NC | unconnected | No Connection. Leave floating or tie to AGND per layout guidelines. |+| 8 | FPWM | input | Forced PWM logic input pin. Tie to AGND for discontinuous conduction mode (DCM) at light load for higher efficiency; tie to VCC for continuous conduction mode (CCM) at all loads (required for Fly-Buck configuration). Absolute max 14 V. |+| 9 | FB | input | Feedback input of the voltage regulation comparator. Connect the output voltage divider tap here; internal reference gives ±1% regulation. |+| 10 | VCC | power_out | Internal high-voltage start-up regulator bypass capacitor pin. Provides the internal bias rail (nominal ~7 V, absolute max 14 V); bypass to AGND with a ceramic capacitor. Do not load externally beyond datasheet limits. |+| 11 | BST | power_in | Bootstrap capacitor pin for the high-side buck FET gate driver. Connect a capacitor between BST and SW (typ. 0.1 µF). Absolute max 14 V above SW, 84 V above AGND. |+| 12 | SW | power_out | Switch node. Source of the high-side buck FET and drain of the low-side synchronous rectifier FET. Connects to the external inductor; carries the switching waveform. |+| 13 | SW | power_out | Switch node (duplicate of pin 12). Source of the high-side buck FET and drain of the low-side synchronous rectifier FET. |+| 14 | NC | unconnected | No Connection. Leave floating or tie to AGND per layout guidelines. |+| 15 | EP | power_in | Exposed thermal pad on the underside of the HTSSOP package. Connect to AGND and to the PCB ground plane to improve power dissipation; this is the primary thermal path. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-14-EP |+| Category | PMIC |+| Pins | 15 |++## Ordering variants++- `LM5160QPWPRQ1QPWPQ1`+- `LM5160QPWPRQ1`+- `LM5160QPWPRQ1QPWPTQ1`++## CAD (KiCad official)++- Symbol: `LM5160QPWPRQ1`+- Footprint: `Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm5160qpwprq1.pdf) (None pp, sha256 `8402782c9ba13b0c`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm5160qpwprq1-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "lm5160qpwprq1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, HTSSOP-14-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "lm5160qpwprq1"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lm5160qpwprq1.kicad_sym",+ "lm5160qpwprq1.kicad_mod",+ "lm5160qpwprq1.glb",+ "lm5160qpwprq1.step",+ "lm5160qpwprq1.lbr",+ "docs/hero.png",+ "docs/lm5160qpwprq1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}