main
Ray
Publish 0.1.0
3268901
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291
{
"slug": "lm51581rter",
"version": "0.1.0",
"type": "component",
"description": "TI(德州仪器) DC-DC Converters, WQFN-16(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management (pmic)",
"lm51581rter",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lm51581rter.kicad_sym",
"lm51581rter.kicad_mod",
"lm51581rter.glb",
"lm51581rter.step",
"lm51581rter.lbr",
"docs/hero.png",
"docs/lm51581rter-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lm51581rter-hero.glb",
"lm51581rter-hero.overlay.json",
"lm51581rter-etched.glb"
],
"component": {
"mpn": "LM51581RTER",
"manufacturer": "TI(德州仪器)",
"package": "WQFN-16(3x3)",
"pin_count": 17,
"category": "Power Management (PMIC)",
"subcategory": "DC-DC Converters",
"datasheet": "https://www.ti.com/cn/lit/gpn/lm51581",
"parts": {
"symbol": "lm51581rter.kicad_sym",
"footprint": "lm51581rter.kicad_mod",
"model_3d": "lm51581rter-hero.glb",
"model_3d_plain": "lm51581rter-etched.glb",
"model_3d_step": "lm51581rter-etched.step",
"model_3d_step_plain": "lm51581rter.step",
"lbr": "lm51581rter.lbr"
},
"distributor_links": {
"lcsc": "C5219219",
"digikey": "296-LM51581RTERTR-ND",
"mouser": "595-LM51581RTER"
},
"distributor_check": {
"checked_at": "2026-11-10T06:19:04Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-LM51581RTERTR-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "595-LM51581RTER",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "PGND",
"type": "power_in",
"description": "Power ground pin, the source connection of the internal N-channel power MOSFET; connect to the power ground."
},
{
"number": "2",
"name": "VCC",
"type": "power_out",
"description": "Output of the internal VCC regulator and supply input of the internal MOSFET driver; connect a 1-µF ceramic bypass capacitor from this pin to PGND."
},
{
"number": "3",
"name": "BIAS",
"type": "power_in",
"description": "Supply voltage input to the VCC regulator; connect a bypass capacitor from this pin to PGND. Datasheet operating range is 3.2 V to 60 V (absolute maximum 65 V)."
},
{
"number": "4",
"name": "PGOOD",
"type": "output",
"description": "Open-drain power-good indicator that goes low if FB is below the undervoltage threshold (VUVTH); connect a pullup resistor to the system voltage rail."
},
{
"number": "5",
"name": "RT",
"type": "input",
"description": "Switching frequency setting pin; the switching frequency is programmed by a single resistor between RT and AGND (100 kHz to 2.2 MHz range)."
},
{
"number": "6",
"name": "EN/UVLO/SYNC",
"type": "input",
"description": "Enable pin that shuts the converter down when below the enable threshold (VEN), also used for programmable UVLO through a voltage divider and as an external sync input via a negative pulse; must not be left floating and should connect to BIAS if unused."
},
{
"number": "7",
"name": "AGND",
"type": "power_in",
"description": "Analog ground pin; connect to the analog ground plane through a wide and short path."
},
{
"number": "8",
"name": "COMP",
"type": "output",
"description": "Output of the internal transconductance error amplifier; connect the loop compensation components between this pin and AGND."
},
{
"number": "9",
"name": "FB",
"type": "input",
"description": "Inverting input of the error amplifier; connect a voltage divider to set the output voltage in boost, SEPIC or primary-side regulated flyback topologies, with the low-side resistor as close to AGND as possible."
},
{
"number": "10",
"name": "SS",
"type": "input",
"description": "Soft-start time programming pin; an external capacitor with an internal current source sets the ramp rate of the error amplifier reference, with the capacitor ground connected to AGND."
},
{
"number": "11",
"name": "MODE",
"type": "input",
"description": "Mode selection pin sampled at initial power-up: 0 V (or AGND) disables hiccup and spread spectrum, 370 mV (37.4 kΩ to AGND) enables both, 620 mV (62.0 kΩ) enables hiccup only, and >1 V (100 kΩ to AGND) enables spread spectrum only."
},
{
"number": "12",
"name": "NC",
"type": "unconnected",
"description": "No internal electrical contact; leave unconnected."
},
{
"number": "13",
"name": "SW",
"type": "output",
"description": "Switch pin, the drain connection of the internal N-channel power MOSFET; absolute maximum SW to AGND is 85 V DC with -6 V for 5 ns transients."
},
{
"number": "14",
"name": "SW",
"type": "output",
"description": "Switch pin, the drain connection of the internal N-channel power MOSFET; absolute maximum SW to AGND is 85 V DC with -6 V for 5 ns transients."
},
{
"number": "15",
"name": "NC",
"type": "unconnected",
"description": "No internal electrical contact; leave unconnected."
},
{
"number": "16",
"name": "PGND",
"type": "power_in",
"description": "Power ground pin, the source connection of the internal N-channel power MOSFET; connect to the power ground."
},
{
"number": "17",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pinout is taken from the Chinese translation (ZHCSN69). The official English datasheet (SNVSBZ7) tak; The exposed pad (EP) is not numbered in the datasheet, so it is not listed as a pin. It must be conn; The datasheet gives no explicit pin type for SW (13, 14); 'output' was chosen from its description a",
"exposed pad 17 added from the footprint"
],
"pages_sent": 9,
"cost_usd": 0.0735,
"at": "2026-11-10T06:18:52"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/lm51581",
"pages": 45,
"sha256": "9e8875f070157c1d",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 17,
"described": 17,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lm51581rter.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.0,
3.0,
0.785
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",
"checked": "2026-11-10",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lm51581rter-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.0,
3.0,
0.785
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "c9183904126e9018adf8f78a3adb052ebfe8f4c4947b1357b394903dc76b92b1",
"checked": "2026-11-10",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "RTE0016C",
"source_page": 42,
"D": {
"nom_mm": 3.0,
"range_mm": [
2.9,
3.1
]
},
"E1": {
"nom_mm": 3.0,
"range_mm": [
2.9,
3.1
]
},
"e": {
"nom_mm": 0.5,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 0.8,
"range_mm": [
null,
0.8
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "lm51581rter.step",
"verdict": "PASS",
"reasons": [
"height within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}