component
LM5156HPWPR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# LM5156HPWPR++**Texas Instruments** · DC-DC Converters · HTSSOP-14-EP++LM5156HPWPR from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | BIAS | power_in | Supply voltage input to VCC regulator operating from 2.97 V to 60 V with absolute maximum 65 V. |+| 2 | NC | unconnected | No electrical connection. |+| 3 | VCC | power_out | VCC regulator output and MOSFET driver supply voltage regulated to 6.85 V typical from ≥8 V BIAS input. |+| 4 | GATE | output | N-channel MOSFET gate drive output with ±1.5 A peak sourcing and sinking current capability. |+| 5 | PGND | power_in | Power ground connection for sense resistor return path requiring low inductance wide and short path. |+| 6 | AGND | power_in | Analog ground connection to be connected directly to analog ground plane through wide and short path. |+| 7 | CS | input | Current sense input with peak current limit threshold of 100 mV ±7% for cycle-by-cycle limiting. |+| 8 | COMP | output | Transconductance error amplifier output with 2 mA/V gain and internal voltage clamps from 1.15 V to 2.8 V. |+| 9 | DITHOFF | input | Spread spectrum selection pin with internal dithering enabled when grounded and disabled when connected to VCC. |+| 10 | FB | input | Inverting input of error amplifier with 1.0 V ±1% internal reference and absolute maximum voltage rating 4.0 V. |+| 11 | SS | input | Soft-start capacitor programming pin charged with 10 μA internal current source to ramp reference voltage. |+| 12 | RT | input | Switching frequency setting pin with external resistor programming frequency from 100 kHz to 2.2 MHz. |+| 13 | PGOOD | tri_state | Open-drain power good indicator output pulled low when FB voltage falls below 90% ±3% of internal reference. |+| 14 | EN/UVLO/SYNC | input | Undervoltage lockout and external clock synchronization input with enable threshold 0.52 V and UVLO threshold 1.5 V. |+| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-14-EP |+| Category | Power Management (PMIC) |+| Pins | 15 |++## CAD (KiCad official)++- Symbol: `LM5156HPWPR`+- Footprint: `Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)+- 3D model files: `lm5156hpwpr-etched.step` / `lm5156hpwpr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm5156hpwpr.step` / `lm5156hpwpr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm5156h) (47 pp, sha256 `1c2afe6d19f818b2`, retrieved 2026-09-27, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm5156hpwpr-datasheet.pdf)
page.jsonadded+197@@ -0,0 +1,197 @@+{+ "slug": "lm5156hpwpr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "lm5156hpwpr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lm5156hpwpr.kicad_sym",+ "lm5156hpwpr.kicad_mod",+ "lm5156hpwpr.glb",+ "lm5156hpwpr.step",+ "lm5156hpwpr.lbr",+ "docs/hero.png",+ "docs/lm5156hpwpr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "LM5156HPWPR",+ "manufacturer": "Texas Instruments",+ "package": "HTSSOP-14-EP",+ "pin_count": 15,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lm5156h",+ "parts": {+ "symbol": "lm5156hpwpr.kicad_sym",+ "footprint": "lm5156hpwpr.kicad_mod",+ "model_3d": "lm5156hpwpr-etched.glb",+ "model_3d_plain": "lm5156hpwpr.glb",+ "model_3d_step": "lm5156hpwpr-etched.step",+ "model_3d_step_plain": "lm5156hpwpr.step",+ "lbr": "lm5156hpwpr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2867852",+ "digikey": "296-LM5156HPWPRTR-ND",+ "mouser": "595-LM5156HPWPR"+ },+ "distributor_check": {+ "checked_at": "2026-09-27T10:49:46Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-LM5156HPWPRTR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-LM5156HPWPR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "BIAS",+ "type": "power_in",+ "description": "Supply voltage input to VCC regulator operating from 2.97 V to 60 V with absolute maximum 65 V."+ },+ {+ "number": "2",+ "name": "NC",+ "type": "unconnected",+ "description": "No electrical connection."+ },+ {+ "number": "3",+ "name": "VCC",+ "type": "power_out",+ "description": "VCC regulator output and MOSFET driver supply voltage regulated to 6.85 V typical from ≥8 V BIAS input."+ },+ {+ "number": "4",+ "name": "GATE",+ "type": "output",+ "description": "N-channel MOSFET gate drive output with ±1.5 A peak sourcing and sinking current capability."+ },+ {+ "number": "5",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground connection for sense resistor return path requiring low inductance wide and short path."+ },+ {+ "number": "6",+ "name": "AGND",+ "type": "power_in",+ "description": "Analog ground connection to be connected directly to analog ground plane through wide and short path."+ },+ {+ "number": "7",+ "name": "CS",+ "type": "input",+ "description": "Current sense input with peak current limit threshold of 100 mV ±7% for cycle-by-cycle limiting."+ },+ {+ "number": "8",+ "name": "COMP",+ "type": "output",+ "description": "Transconductance error amplifier output with 2 mA/V gain and internal voltage clamps from 1.15 V to 2.8 V."+ },+ {+ "number": "9",+ "name": "DITHOFF",+ "type": "input",+ "description": "Spread spectrum selection pin with internal dithering enabled when grounded and disabled when connected to VCC."+ },+ {+ "number": "10",+ "name": "FB",+ "type": "input",+ "description": "Inverting input of error amplifier with 1.0 V ±1% internal reference and absolute maximum voltage rating 4.0 V."+ },+ {+ "number": "11",+ "name": "SS",+ "type": "input",+ "description": "Soft-start capacitor programming pin charged with 10 μA internal current source to ramp reference voltage."+ },+ {+ "number": "12",+ "name": "RT",+ "type": "input",+ "description": "Switching frequency setting pin with external resistor programming frequency from 100 kHz to 2.2 MHz."+ },+ {+ "number": "13",+ "name": "PGOOD",+ "type": "tri_state",+ "description": "Open-drain power good indicator output pulled low when FB voltage falls below 90% ±3% of internal reference."+ },+ {+ "number": "14",+ "name": "EN/UVLO/SYNC",+ "type": "input",+ "description": "Undervoltage lockout and external clock synchronization input with enable threshold 0.52 V and UVLO threshold 1.5 V."+ },+ {+ "number": "15",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 47,+ "cost_usd": 0.3244,+ "at": "2026-09-27T10:49:30"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lm5156h",+ "pages": 47,+ "sha256": "1c2afe6d19f818b2",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 15,+ "described": 15,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}