main
Ray Publish 0.1.1 7e19c86
{
  "schema_version": 1,
  "type": "component",
  "slug": "lm5155dssr",
  "title": "LM5155DSSR",
  "brief": "Texas Instruments DC-DC Converters, WSON-12-EP(2x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "lm5155dssr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "LM5155DSSR",
    "manufacturer": "Texas Instruments",
    "package": "WSON-12-EP(2x3)",
    "pin_count": 13,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lm51551",
    "parts": {
      "symbol": "lm5155dssr.kicad_sym",
      "footprint": "lm5155dssr.kicad_mod",
      "model_3d": "lm5155dssr-hero.glb",
      "model_3d_plain": "lm5155dssr.glb",
      "model_3d_step": "lm5155dssr-etched.step",
      "model_3d_step_plain": "lm5155dssr.step",
      "lbr": "lm5155dssr.lbr"
    },
    "distributor_links": {
      "lcsc": "C545416",
      "digikey": "296-LM5155DSSRTR-ND",
      "mouser": "595-LM5155DSSR"
    },
    "distributor_check": {
      "checked_at": "2026-10-01T17:15:59Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-LM5155DSSRTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-LM5155DSSR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "BIAS",
        "type": "power_in",
        "description": "Power voltage input for VCC regulator with bypass capacitor to PGND, operating range 3.5V to 45V."
      },
      {
        "number": "2",
        "name": "VCC",
        "type": "power_out",
        "description": "Regulated 6.85V output from internal VCC regulator powering MOSFET driver with ceramic bypass capacitor to PGND."
      },
      {
        "number": "3",
        "name": "GATE",
        "type": "output",
        "description": "N-channel MOSFET gate drive output with 1.5A peak current capacity, connect directly to gate through short, low-inductance path."
      },
      {
        "number": "4",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground pin connected through wide, short, low-inductance path directly to current sense resistor ground."
      },
      {
        "number": "5",
        "name": "CS",
        "type": "input",
        "description": "Current sense input pin for peak current mode control at -0.3V to +0.3V DC range, connect to positive side of sense resistor."
      },
      {
        "number": "6",
        "name": "COMP",
        "type": "output",
        "description": "Transconductance error amplifier output with 10MΩ output impedance and 2.5V to 2.8V clamp voltage, connect loop compensation to PGND."
      },
      {
        "number": "7",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground pin connected through wide, short path to analog ground plane."
      },
      {
        "number": "8",
        "name": "FB",
        "type": "input",
        "description": "Error amplifier inverting input with 1V internal reference and 3.8V absolute maximum, voltage divider from output sets boost/SEPIC regulation with low-side resistor to AGND."
      },
      {
        "number": "9",
        "name": "SS",
        "type": "input",
        "description": "Soft-start programming pin with internal 10µA current source charging external capacitor to set error amplifier reference ramp rate, capacitor ground to AGND."
      },
      {
        "number": "10",
        "name": "RT",
        "type": "input",
        "description": "Switching frequency programming pin using single resistor between RT and AGND to set 100kHz to 2.2MHz operating frequency."
      },
      {
        "number": "11",
        "name": "PGOOD",
        "type": "output",
        "description": "Open-drain power good indicator pulling low when FB falls below 90% VREF undervoltage threshold, requires pull-up resistor to system voltage rail."
      },
      {
        "number": "12",
        "name": "UVLO/EN/SYNC",
        "type": "input",
        "description": "Undervoltage lockout and synchronization input programmed via resistor divider to supply voltage for startup/shutdown threshold or synchronized to external clock via negative pulses, must not float and connect to BIAS when unused."
      },
      {
        "number": "13",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 47,
        "cost_usd": 0.3295,
        "at": "2026-10-01T17:15:40"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lm51551",
        "pages": 47,
        "sha256": "bd3a89d2b1c0634e",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 13,
        "described": 13,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm5155dssr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.02,
          3,
          0.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "45f76bacfe90ea920219d6900d00a241df643e09e4d932df23a0e70220e10c51",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm5155dssr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.02,
          3,
          0.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "eea7c2669b678cd3d517335e86b1c1da76fe4ba740a91b4a52fb27fd9a75101f",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "WSON-12-EP(2x3)",
      "Category": "Power Management (PMIC)",
      "Pins": "13"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lm5155dssr"
  ],
  "discovery_pitch": "LM5155DSSR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm5155dssr.kicad_sym",
    "lm5155dssr.kicad_mod",
    "lm5155dssr.glb",
    "lm5155dssr.step",
    "lm5155dssr.lbr",
    "docs/hero.png",
    "docs/lm5155dssr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm5155dssr-etched.step",
    "lm5155dssr-hero.glb",
    "lm5155dssr-hero.overlay.json"
  ],
  "visibility": "public",
  "description": "Texas Instruments DC-DC Converters, WSON-12-EP(2x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "org": "adom"
}