main
Ray
Publish 0.1.1
7e19c86
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238
{
"slug": "lm5155dssr",
"version": "0.1.1",
"type": "component",
"description": "Texas Instruments DC-DC Converters, WSON-12-EP(2x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management (pmic)",
"lm5155dssr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lm5155dssr.kicad_sym",
"lm5155dssr.kicad_mod",
"lm5155dssr.glb",
"lm5155dssr.step",
"lm5155dssr.lbr",
"docs/hero.png",
"docs/lm5155dssr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lm5155dssr-etched.step",
"lm5155dssr-hero.glb",
"lm5155dssr-hero.overlay.json"
],
"component": {
"mpn": "LM5155DSSR",
"manufacturer": "Texas Instruments",
"package": "WSON-12-EP(2x3)",
"pin_count": 13,
"category": "Power Management (PMIC)",
"subcategory": "DC-DC Converters",
"datasheet": "https://www.ti.com/cn/lit/gpn/lm51551",
"parts": {
"symbol": "lm5155dssr.kicad_sym",
"footprint": "lm5155dssr.kicad_mod",
"model_3d": "lm5155dssr-hero.glb",
"model_3d_plain": "lm5155dssr.glb",
"model_3d_step": "lm5155dssr-etched.step",
"model_3d_step_plain": "lm5155dssr.step",
"lbr": "lm5155dssr.lbr"
},
"distributor_links": {
"lcsc": "C545416",
"digikey": "296-LM5155DSSRTR-ND",
"mouser": "595-LM5155DSSR"
},
"distributor_check": {
"checked_at": "2026-10-01T17:15:59Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-LM5155DSSRTR-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "595-LM5155DSSR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "BIAS",
"type": "power_in",
"description": "Power voltage input for VCC regulator with bypass capacitor to PGND, operating range 3.5V to 45V."
},
{
"number": "2",
"name": "VCC",
"type": "power_out",
"description": "Regulated 6.85V output from internal VCC regulator powering MOSFET driver with ceramic bypass capacitor to PGND."
},
{
"number": "3",
"name": "GATE",
"type": "output",
"description": "N-channel MOSFET gate drive output with 1.5A peak current capacity, connect directly to gate through short, low-inductance path."
},
{
"number": "4",
"name": "PGND",
"type": "power_in",
"description": "Power ground pin connected through wide, short, low-inductance path directly to current sense resistor ground."
},
{
"number": "5",
"name": "CS",
"type": "input",
"description": "Current sense input pin for peak current mode control at -0.3V to +0.3V DC range, connect to positive side of sense resistor."
},
{
"number": "6",
"name": "COMP",
"type": "output",
"description": "Transconductance error amplifier output with 10MΩ output impedance and 2.5V to 2.8V clamp voltage, connect loop compensation to PGND."
},
{
"number": "7",
"name": "AGND",
"type": "power_in",
"description": "Analog ground pin connected through wide, short path to analog ground plane."
},
{
"number": "8",
"name": "FB",
"type": "input",
"description": "Error amplifier inverting input with 1V internal reference and 3.8V absolute maximum, voltage divider from output sets boost/SEPIC regulation with low-side resistor to AGND."
},
{
"number": "9",
"name": "SS",
"type": "input",
"description": "Soft-start programming pin with internal 10µA current source charging external capacitor to set error amplifier reference ramp rate, capacitor ground to AGND."
},
{
"number": "10",
"name": "RT",
"type": "input",
"description": "Switching frequency programming pin using single resistor between RT and AGND to set 100kHz to 2.2MHz operating frequency."
},
{
"number": "11",
"name": "PGOOD",
"type": "output",
"description": "Open-drain power good indicator pulling low when FB falls below 90% VREF undervoltage threshold, requires pull-up resistor to system voltage rail."
},
{
"number": "12",
"name": "UVLO/EN/SYNC",
"type": "input",
"description": "Undervoltage lockout and synchronization input programmed via resistor divider to supply voltage for startup/shutdown threshold or synchronized to external clock via negative pulses, must not float and connect to BIAS when unused."
},
{
"number": "13",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.2",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.2",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [],
"pages_sent": 47,
"cost_usd": 0.3295,
"at": "2026-10-01T17:15:40"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/lm51551",
"pages": 47,
"sha256": "bd3a89d2b1c0634e",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 13,
"described": 13,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lm5155dssr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.02,
3.0,
0.75
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "45f76bacfe90ea920219d6900d00a241df643e09e4d932df23a0e70220e10c51",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lm5155dssr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.02,
3.0,
0.75
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "eea7c2669b678cd3d517335e86b1c1da76fe4ba740a91b4a52fb27fd9a75101f",
"checked": "2026-10-17",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"title": "LM5155DSSR",
"brief": "Texas Instruments DC-DC Converters, WSON-12-EP(2x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "WSON-12-EP(2x3)",
"Category": "Power Management (PMIC)",
"Pins": "13"
}
},
"discovery_triggers": [
"lm5155dssr"
],
"discovery_pitch": "LM5155DSSR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"visibility": "public"
}