main
Ray Publish 0.1.0 ce805cd
{
  "slug": "lm5148rgyr",
  "version": "0.1.0",
  "type": "component",
  "description": "TEXAS INSTRUMENTS DC-DC Converters, VQFN-24(5.5x3.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "lm5148rgyr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm5148rgyr.kicad_sym",
    "lm5148rgyr.kicad_mod",
    "lm5148rgyr.glb",
    "lm5148rgyr.step",
    "lm5148rgyr.lbr",
    "docs/hero.png",
    "docs/lm5148rgyr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm5148rgyr-hero.glb",
    "lm5148rgyr-hero.overlay.json"
  ],
  "component": {
    "mpn": "LM5148RGYR",
    "manufacturer": "TEXAS INSTRUMENTS",
    "package": "VQFN-24(5.5x3.5)",
    "pin_count": 25,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/lit/ds/symlink/lm5148.pdf",
    "parts": {
      "symbol": "lm5148rgyr.kicad_sym",
      "footprint": "lm5148rgyr.kicad_mod",
      "model_3d": "lm5148rgyr-hero.glb",
      "model_3d_plain": "lm5148rgyr.glb",
      "model_3d_step": "lm5148rgyr-etched.step",
      "model_3d_step_plain": "lm5148rgyr.step",
      "lbr": "lm5148rgyr.lbr"
    },
    "distributor_links": {
      "lcsc": "C7470701",
      "digikey": "296-LM5148RGYRCT-ND",
      "mouser": "595-LM5148RGYR"
    },
    "distributor_check": {
      "checked_at": "2026-11-16T23:54:18Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-LM5148RGYRCT-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-LM5148RGYR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "NC",
        "type": "unconnected",
        "description": "Not internally connected; connect to GND at the exposed pad to improve heat spreading."
      },
      {
        "number": "2",
        "name": "NC",
        "type": "unconnected",
        "description": "Not internally connected; connect to GND at the exposed pad to improve heat spreading."
      },
      {
        "number": "3",
        "name": "CNFG",
        "type": "input",
        "description": "Connect a resistor to ground to set primary/secondary, spread spectrum enable/disable, or interleaved operation; CNFG to AGND is rated -0.3 V to 5.5 V."
      },
      {
        "number": "4",
        "name": "RT",
        "type": "input",
        "description": "Frequency programming pin; a resistor from RT to AGND sets the oscillator frequency between 100 kHz and 2.2 MHz."
      },
      {
        "number": "5",
        "name": "EXTCOMP",
        "type": "output",
        "description": "Transconductance error amplifier output; if used, connect the compensation network from EXTCOMP to AGND."
      },
      {
        "number": "6",
        "name": "FB",
        "type": "input",
        "description": "Feedback input with a 0.8 V regulation voltage; tie to VDDA for 3.3 V, use 24.9 kΩ or 49.9 kΩ to VDDA for 5 V or 12 V, or use a divider from VOUT for 0.8 V to 55 V."
      },
      {
        "number": "7",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground connection and return for the internal voltage reference and analog circuits."
      },
      {
        "number": "8",
        "name": "VDDA",
        "type": "power_out",
        "description": "Internal analog bias regulator output; connect a ceramic decoupling capacitor from VDDA to AGND."
      },
      {
        "number": "9",
        "name": "VCC",
        "type": "power_out",
        "description": "VCC bias supply pin; connect a ceramic capacitor between VCC and PGND."
      },
      {
        "number": "10",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground connection for the low-side MOSFET gate driver."
      },
      {
        "number": "11",
        "name": "LO",
        "type": "output",
        "description": "Low-side power MOSFET gate driver output; LO to PGND is rated -0.3 V to VVCC + 0.3 V."
      },
      {
        "number": "12",
        "name": "VIN",
        "type": "power_in",
        "description": "Supply voltage input for the VCC regulator; recommended input supply range is 3.5 V to 80 V."
      },
      {
        "number": "13",
        "name": "HO",
        "type": "output",
        "description": "High-side power MOSFET gate driver output, referenced to SW."
      },
      {
        "number": "14",
        "name": "SW",
        "type": "passive",
        "description": "Switching node of the buck regulator and high-side gate driver return; connect to the bootstrap capacitor, high-side MOSFET source, and low-side MOSFET drain."
      },
      {
        "number": "15",
        "name": "CBOOT",
        "type": "power_out",
        "description": "High-side driver supply for bootstrap gate drive; CBOOT to SW is rated -0.3 V to 5.25 V in recommended conditions."
      },
      {
        "number": "16",
        "name": "VCCX",
        "type": "power_in",
        "description": "Optional external bias supply input; if VCCX exceeds 4.3 V, it is connected internally to VCC and the internal VCC regulator is disabled."
      },
      {
        "number": "17",
        "name": "PG/SYNCOUT",
        "type": "output",
        "description": "Open-collector output that goes low when VOUT is outside the specified regulation window; in dual-phase mode the primary provides a 180° phase-shifted SYNCOUT."
      },
      {
        "number": "18",
        "name": "PFM/SYNC",
        "type": "input",
        "description": "Connect to VDDA to enable diode emulation, to AGND for forced PWM mode, or apply an external clock to synchronize the internal oscillator."
      },
      {
        "number": "19",
        "name": "EN",
        "type": "input",
        "description": "Active-high precision enable with a rising threshold of 1 V and 10 µA hysteresis current; below 0.5 V the device is in shutdown unless a SYNC signal is present."
      },
      {
        "number": "20",
        "name": "ISNS+",
        "type": "input",
        "description": "Current sense amplifier input; connect to the inductor side of the external sense resistor using a low-current Kelvin connection."
      },
      {
        "number": "21",
        "name": "VOUT",
        "type": "input",
        "description": "Output voltage sense and current sense amplifier input; connect to the output side of the current sense resistor."
      },
      {
        "number": "22",
        "name": "NC",
        "type": "unconnected",
        "description": "Not internally connected; connect to GND at the exposed pad to improve heat spreading."
      },
      {
        "number": "23",
        "name": "NC",
        "type": "unconnected",
        "description": "Not internally connected; connect to GND at the exposed pad to improve heat spreading."
      },
      {
        "number": "24",
        "name": "NC",
        "type": "unconnected",
        "description": "Not internally connected; connect to GND at the exposed pad to improve heat spreading."
      },
      {
        "number": "25",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The exposed pad (EP, shown as pad 25 in the stencil drawing) is not in the pin table and is not numb; The package variant matches the hint: the package addendum lists LM5148RGYR as VQFN (RGY), 24 pins. ",
          "exposed pad 25 added from the footprint"
        ],
        "pages_sent": 8,
        "cost_usd": 0.0436,
        "at": "2026-11-16T23:54:07"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/lm5148.pdf",
        "pages": 70,
        "sha256": "bdea4391ef5e5cfa",
        "source_tier": "mfr"
      },
      "cad": "Adom_Gen derived land; symbol and 3D generated",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm5148rgyr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.52,
          5.52,
          1.0
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7fce62b4a438ce810cec328e1739748bbabd58732923ba1457004d3d488c5304",
        "checked": "2026-11-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm5148rgyr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.52,
          5.52,
          1.0
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "651b112a64e331e4570ccfaedb8cd243c99cb6fb231467db1fd89a5dfd0a232e",
        "checked": "2026-11-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}