← Commit history

Initial commit: component/lm5140qrwgtq1

Ray ·9000007150 ·
2 files changed +415
README.mdadded+77
@@ -0,0 +1,77 @@+# LM5140QRWGTQ1++**Texas Instruments** · DC-DC Controllers · VQFN-40-EP(6x6)++LM5140QRWGTQ1 from Texas Instruments, in a VQFN-40-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SS2 | input | Channel 2 soft-start ramp node; internal 20-μA source charges external capacitor; pulling below 80 mV disables channel 2 gate driver outputs. |+| 2 | COMP2 | output | Channel 2 transconductance error amplifier output; apply compensation network to set loop response. |+| 3 | FB2 | input | Channel 2 feedback input; connect to VDDA for 5-V output, ground for 8-V fixed output, or external divider for 1.5-15-V adjustable (1.2-V regulation threshold). |+| 4 | CS2 | input | Channel 2 current sense amplifier input; make low-current Kelvin connection to inductor side of sense resistor. |+| 5 | VOUT2 | input | Channel 2 output and current sense amplifier input; connect to load side of channel 2 current sense resistor. |+| 6 | VCCX | input | Optional external 5-V bias supply input; if VCCX > 4.5 V, internally connected to VCC and disables internal regulator; ground if unused; maximum 6.5 V. |+| 7 | PG2 | output | Channel 2 power-good open-collector output; asserts low when VOUT2 falls below 92% or rises above 110% of regulation voltage; 25-μs deglitch filter. |+| 8 | HOL2 | output | Channel 2 high-side gate driver turn-off output; independent source/sink pin for adjustable slew-rate control. |+| 9 | HO2 | output | Channel 2 high-side gate driver turn-on output; sources 3.25-A peak current at HB2 voltage, sinks 4.25 A peak. |+| 10 | SW2 | input | Channel 2 switching node sense input; connect to bootstrap capacitor, source of high-side MOSFET, and drain of low-side MOSFET. |+| 11 | HB2 | output | Channel 2 bootstrap gate driver supply output; charges from VCC through external diode when low-side FET is on; typical voltage HB2 - SW2 = 4.5-5.25 V. |+| 12 | LOL2 | output | Channel 2 low-side gate driver turn-off output; independent source/sink pin for adjustable slew-rate control. |+| 13 | LO2 | output | Channel 2 low-side gate driver turn-on output; sources 3.25-A peak current, sinks 4.25 A peak to PGND. |+| 14 | PGND2 | power_in | Channel 2 power ground return for low-side MOSFET gate driver; connect to board power ground plane. |+| 15 | VCC | power_in | Bias supply input (pins 15 and 16 must be connected together on PCB); 5-V regulated output (4.75-5.25 V typical); 150-mA minimum source limit. |+| 16 | VCC | power_in | Bias supply input (pins 15 and 16 must be connected together on PCB); 5-V regulated output (4.75-5.25 V typical); 150-mA minimum source limit. |+| 17 | PGND1 | power_in | Channel 1 power ground return for low-side MOSFET gate driver; connect to board power ground plane. |+| 18 | LO1 | output | Channel 1 low-side gate driver turn-on output; sources 3.25-A peak current, sinks 4.25 A peak to PGND. |+| 19 | LOL1 | output | Channel 1 low-side gate driver turn-off output; independent source/sink pin for adjustable slew-rate control. |+| 20 | HB1 | output | Channel 1 bootstrap gate driver supply output; charges from VCC through external diode when low-side FET is on; typical voltage HB1 - SW1 = 4.5-5.25 V. |+| 21 | SW1 | input | Channel 1 switching node sense input; connect to bootstrap capacitor, source of high-side MOSFET, and drain of low-side MOSFET. |+| 22 | HO1 | output | Channel 1 high-side gate driver turn-on output; sources 3.25-A peak current at HB1 voltage, sinks 4.25 A peak. |+| 23 | HOL1 | output | Channel 1 high-side gate driver turn-off output; independent source/sink pin for adjustable slew-rate control. |+| 24 | PG1 | output | Channel 1 power-good open-collector output; asserts low when VOUT1 falls below 92% or rises above 110% of regulation voltage; 25-μs deglitch filter. |+| 25 | VIN | power_in | Supply voltage input (3.8-65 V nominal, 70-V absolute maximum); provides input for internal VCC regulator; bypass with quality capacitors to minimize transient ringing. |+| 26 | VOUT1 | input | Channel 1 output and current sense amplifier input; connect to load side of channel 1 current sense resistor. |+| 27 | CS1 | input | Channel 1 current sense amplifier input; make low-current Kelvin connection to inductor side of sense resistor. |+| 28 | FB1 | input | Channel 1 feedback input; connect to VDDA for 3.3-V output, ground for 5-V fixed output, or external divider for 1.5-15-V adjustable (1.2-V regulation threshold). |+| 29 | COMP1 | output | Channel 1 transconductance error amplifier output; apply compensation network to set loop response. |+| 30 | SS1 | input | Channel 1 soft-start ramp node; internal 20-μA source charges external capacitor; pulling below 80 mV disables channel 1 gate driver outputs. |+| 31 | EN1 | input | Channel 1 enable logic input (active high); threshold 2.4 V typical; accepts voltage up to 70 V for wide input range applications. |+| 32 | RES | output | Restart timer output node; external capacitor configures hiccup mode off-time (20-μA internal charging current); connect to VDDA to disable hiccup protection. |+| 33 | DEMB | input | Diode emulation mode control; ground enables diode emulation mode (discontinuous conduction at light load), VDDA enables forced-PWM mode (continuous conduction). |+| 34 | ILSET | input | Current-limit threshold selection pin (latched at power-up); VDDA sets 73-mV limit, ground sets 48-mV limit; ±10% accuracy typical. |+| 35 | AGND | power_in | Analog ground return for internal voltage reference and analog circuits; connect to PGND at single point under IC for low noise. |+| 36 | VDDA | power_in | Internal analog bias regulator output (5-V nominal or 3.3-V in low-power modes); bypass with 100-nF or larger ceramic capacitor to AGND. |+| 37 | OSC | input | Oscillator frequency selection pin (latched at power-up); VDDA selects 2.2-MHz operation, ground selects 440-kHz operation; ±7% frequency tolerance. |+| 38 | SYNIN | input | External synchronization clock input (TTL level); enables internal oscillator sync to external clock; ground if synchronization feature not used. |+| 39 | SYNOUT | output | Synchronization clock output (TTL level); 180° out-of-phase with HO1 gate drive; 50% duty cycle; operates at CLK2 frequency. |+| 40 | EN2 | input | Channel 2 enable logic input (active high); threshold 2.4 V typical; accepts voltage up to 70 V for wide input range applications. |+| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-40-EP(6x6) |+| Category | Power Supply Chip |+| Pins | 41 |++## CAD (KiCad official)++- Symbol: `LM5140QRWGTQ1`+- Footprint: `Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm`+- 3D model: VQFN-40-EP(6x6) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm5140-q1) (48 pp, sha256 `0d277fa180b6852d`, retrieved 2026-09-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm5140qrwgtq1-datasheet.pdf)
page.jsonadded+338
@@ -0,0 +1,338 @@+{+  "slug": "lm5140qrwgtq1",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Controllers, VQFN-40-EP(6x6). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power supply chip",+    "lm5140qrwgtq1",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lm5140qrwgtq1.kicad_sym",+    "lm5140qrwgtq1.kicad_mod",+    "lm5140qrwgtq1.glb",+    "lm5140qrwgtq1.step",+    "lm5140qrwgtq1.lbr",+    "docs/hero.png",+    "docs/lm5140qrwgtq1-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LM5140QRWGTQ1",+    "manufacturer": "Texas Instruments",+    "package": "VQFN-40-EP(6x6)",+    "pin_count": 41,+    "category": "Power Supply Chip",+    "subcategory": "DC-DC Controllers",+    "datasheet": "https://www.ti.com/cn/lit/gpn/lm5140-q1",+    "parts": {+      "symbol": "lm5140qrwgtq1.kicad_sym",+      "footprint": "lm5140qrwgtq1.kicad_mod",+      "model_3d": "lm5140qrwgtq1.glb",+      "model_3d_step": "lm5140qrwgtq1.step",+      "lbr": "lm5140qrwgtq1.lbr"+    },+    "distributor_links": {+      "lcsc": "C201623"+    },+    "pins": [+      {+        "number": "1",+        "name": "SS2",+        "type": "input",+        "description": "Channel 2 soft-start ramp node; internal 20-μA source charges external capacitor; pulling below 80 mV disables channel 2 gate driver outputs."+      },+      {+        "number": "2",+        "name": "COMP2",+        "type": "output",+        "description": "Channel 2 transconductance error amplifier output; apply compensation network to set loop response."+      },+      {+        "number": "3",+        "name": "FB2",+        "type": "input",+        "description": "Channel 2 feedback input; connect to VDDA for 5-V output, ground for 8-V fixed output, or external divider for 1.5-15-V adjustable (1.2-V regulation threshold)."+      },+      {+        "number": "4",+        "name": "CS2",+        "type": "input",+        "description": "Channel 2 current sense amplifier input; make low-current Kelvin connection to inductor side of sense resistor."+      },+      {+        "number": "5",+        "name": "VOUT2",+        "type": "input",+        "description": "Channel 2 output and current sense amplifier input; connect to load side of channel 2 current sense resistor."+      },+      {+        "number": "6",+        "name": "VCCX",+        "type": "input",+        "description": "Optional external 5-V bias supply input; if VCCX > 4.5 V, internally connected to VCC and disables internal regulator; ground if unused; maximum 6.5 V."+      },+      {+        "number": "7",+        "name": "PG2",+        "type": "output",+        "description": "Channel 2 power-good open-collector output; asserts low when VOUT2 falls below 92% or rises above 110% of regulation voltage; 25-μs deglitch filter."+      },+      {+        "number": "8",+        "name": "HOL2",+        "type": "output",+        "description": "Channel 2 high-side gate driver turn-off output; independent source/sink pin for adjustable slew-rate control."+      },+      {+        "number": "9",+        "name": "HO2",+        "type": "output",+        "description": "Channel 2 high-side gate driver turn-on output; sources 3.25-A peak current at HB2 voltage, sinks 4.25 A peak."+      },+      {+        "number": "10",+        "name": "SW2",+        "type": "input",+        "description": "Channel 2 switching node sense input; connect to bootstrap capacitor, source of high-side MOSFET, and drain of low-side MOSFET."+      },+      {+        "number": "11",+        "name": "HB2",+        "type": "output",+        "description": "Channel 2 bootstrap gate driver supply output; charges from VCC through external diode when low-side FET is on; typical voltage HB2 - SW2 = 4.5-5.25 V."+      },+      {+        "number": "12",+        "name": "LOL2",+        "type": "output",+        "description": "Channel 2 low-side gate driver turn-off output; independent source/sink pin for adjustable slew-rate control."+      },+      {+        "number": "13",+        "name": "LO2",+        "type": "output",+        "description": "Channel 2 low-side gate driver turn-on output; sources 3.25-A peak current, sinks 4.25 A peak to PGND."+      },+      {+        "number": "14",+        "name": "PGND2",+        "type": "power_in",+        "description": "Channel 2 power ground return for low-side MOSFET gate driver; connect to board power ground plane."+      },+      {+        "number": "15",+        "name": "VCC",+        "type": "power_in",+        "description": "Bias supply input (pins 15 and 16 must be connected together on PCB); 5-V regulated output (4.75-5.25 V typical); 150-mA minimum source limit."+      },+      {+        "number": "16",+        "name": "VCC",+        "type": "power_in",+        "description": "Bias supply input (pins 15 and 16 must be connected together on PCB); 5-V regulated output (4.75-5.25 V typical); 150-mA minimum source limit."+      },+      {+        "number": "17",+        "name": "PGND1",+        "type": "power_in",+        "description": "Channel 1 power ground return for low-side MOSFET gate driver; connect to board power ground plane."+      },+      {+        "number": "18",+        "name": "LO1",+        "type": "output",+        "description": "Channel 1 low-side gate driver turn-on output; sources 3.25-A peak current, sinks 4.25 A peak to PGND."+      },+      {+        "number": "19",+        "name": "LOL1",+        "type": "output",+        "description": "Channel 1 low-side gate driver turn-off output; independent source/sink pin for adjustable slew-rate control."+      },+      {+        "number": "20",+        "name": "HB1",+        "type": "output",+        "description": "Channel 1 bootstrap gate driver supply output; charges from VCC through external diode when low-side FET is on; typical voltage HB1 - SW1 = 4.5-5.25 V."+      },+      {+        "number": "21",+        "name": "SW1",+        "type": "input",+        "description": "Channel 1 switching node sense input; connect to bootstrap capacitor, source of high-side MOSFET, and drain of low-side MOSFET."+      },+      {+        "number": "22",+        "name": "HO1",+        "type": "output",+        "description": "Channel 1 high-side gate driver turn-on output; sources 3.25-A peak current at HB1 voltage, sinks 4.25 A peak."+      },+      {+        "number": "23",+        "name": "HOL1",+        "type": "output",+        "description": "Channel 1 high-side gate driver turn-off output; independent source/sink pin for adjustable slew-rate control."+      },+      {+        "number": "24",+        "name": "PG1",+        "type": "output",+        "description": "Channel 1 power-good open-collector output; asserts low when VOUT1 falls below 92% or rises above 110% of regulation voltage; 25-μs deglitch filter."+      },+      {+        "number": "25",+        "name": "VIN",+        "type": "power_in",+        "description": "Supply voltage input (3.8-65 V nominal, 70-V absolute maximum); provides input for internal VCC regulator; bypass with quality capacitors to minimize transient ringing."+      },+      {+        "number": "26",+        "name": "VOUT1",+        "type": "input",+        "description": "Channel 1 output and current sense amplifier input; connect to load side of channel 1 current sense resistor."+      },+      {+        "number": "27",+        "name": "CS1",+        "type": "input",+        "description": "Channel 1 current sense amplifier input; make low-current Kelvin connection to inductor side of sense resistor."+      },+      {+        "number": "28",+        "name": "FB1",+        "type": "input",+        "description": "Channel 1 feedback input; connect to VDDA for 3.3-V output, ground for 5-V fixed output, or external divider for 1.5-15-V adjustable (1.2-V regulation threshold)."+      },+      {+        "number": "29",+        "name": "COMP1",+        "type": "output",+        "description": "Channel 1 transconductance error amplifier output; apply compensation network to set loop response."+      },+      {+        "number": "30",+        "name": "SS1",+        "type": "input",+        "description": "Channel 1 soft-start ramp node; internal 20-μA source charges external capacitor; pulling below 80 mV disables channel 1 gate driver outputs."+      },+      {+        "number": "31",+        "name": "EN1",+        "type": "input",+        "description": "Channel 1 enable logic input (active high); threshold 2.4 V typical; accepts voltage up to 70 V for wide input range applications."+      },+      {+        "number": "32",+        "name": "RES",+        "type": "output",+        "description": "Restart timer output node; external capacitor configures hiccup mode off-time (20-μA internal charging current); connect to VDDA to disable hiccup protection."+      },+      {+        "number": "33",+        "name": "DEMB",+        "type": "input",+        "description": "Diode emulation mode control; ground enables diode emulation mode (discontinuous conduction at light load), VDDA enables forced-PWM mode (continuous conduction)."+      },+      {+        "number": "34",+        "name": "ILSET",+        "type": "input",+        "description": "Current-limit threshold selection pin (latched at power-up); VDDA sets 73-mV limit, ground sets 48-mV limit; ±10% accuracy typical."+      },+      {+        "number": "35",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground return for internal voltage reference and analog circuits; connect to PGND at single point under IC for low noise."+      },+      {+        "number": "36",+        "name": "VDDA",+        "type": "power_in",+        "description": "Internal analog bias regulator output (5-V nominal or 3.3-V in low-power modes); bypass with 100-nF or larger ceramic capacitor to AGND."+      },+      {+        "number": "37",+        "name": "OSC",+        "type": "input",+        "description": "Oscillator frequency selection pin (latched at power-up); VDDA selects 2.2-MHz operation, ground selects 440-kHz operation; ±7% frequency tolerance."+      },+      {+        "number": "38",+        "name": "SYNIN",+        "type": "input",+        "description": "External synchronization clock input (TTL level); enables internal oscillator sync to external clock; ground if synchronization feature not used."+      },+      {+        "number": "39",+        "name": "SYNOUT",+        "type": "output",+        "description": "Synchronization clock output (TTL level); 180° out-of-phase with HO1 gate drive; 50% duty cycle; operates at CLK2 frequency."+      },+      {+        "number": "40",+        "name": "EN2",+        "type": "input",+        "description": "Channel 2 enable logic input (active high); threshold 2.4 V typical; accepts voltage up to 70 V for wide input range applications."+      },+      {+        "number": "41",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 41 added from the footprint"+        ],+        "pages_sent": 48,+        "cost_usd": 0.5902,+        "at": "2026-09-17T17:53:23"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/lm5140-q1",+        "pages": 48,+        "sha256": "0d277fa180b6852d",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 41,+        "described": 41,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file