← Commit history
Publish 0.1.1
4 files changed
+601−44
lm5123qrgrrq1-hero.glbadded⋯ 1 unchanged line ⋯
lm5123qrgrrq1-hero.overlay.jsonadded+537@@ -0,0 +1,537 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "LM5123QRGRRQ1",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 21,+ "span_mm": 5.375,+ "dash_mm": 0.1344,+ "gap_mm": 0.0806,+ "pad_stroke_mm": 0.0322+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 9,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 20,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.34,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -1.76,+ 1.76,+ -1.76,+ 1.76+ ],+ "pads_bbox_mm": [+ -2.125,+ 2.125,+ -2.125,+ 2.125+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "lm5123qrgrrq1-etched.glb",+ "glb_sha256": "8f6f20149112cffa6a14e8de728248da14c52d36826fba4ac9366336f32a7719",+ "footprint": "lm5123qrgrrq1.kicad_mod",+ "footprint_sha256": "d23b102e1011a973a2b07b9296564ee71991e1a06b293b04ba98b8e8e79477fb",+ "pins": "page.json component.pins",+ "pins_sha256": "d1300a26cd925d33774a1103a4b7cb7bb6eb636037edc18502ac4092e667ad6a"+ },+ "generator": "adom-wiki 1.8.25 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "CSP",+ "x": -2.82,+ "y": -1.0,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "2",+ "text": "CSN",+ "x": -2.225,+ "y": -0.5,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "3",+ "text": "VOUT/SENSE",+ "x": -2.225,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "4",+ "text": "PGOOD",+ "x": -2.225,+ "y": 0.5,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "5",+ "text": "HO",+ "x": -2.225,+ "y": 1.0,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "6",+ "text": "SW",+ "x": -1.0,+ "y": 2.225,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "7",+ "text": "HB",+ "x": -0.5,+ "y": 2.225,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "8",+ "text": "BIAS",+ "x": 0.0,+ "y": 2.225,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "9",+ "text": "VCC",+ "x": 0.5,+ "y": 2.225,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "10",+ "text": "PGND",+ "x": 1.0,+ "y": 2.225,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "11",+ "text": "LO",+ "x": 2.225,+ "y": 1.0,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "12",+ "text": "MODE",+ "x": 2.225,+ "y": 0.5,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "13",+ "text": "UVLO/EN",+ "x": 2.225,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "14",+ "text": "SYNC/DITHER/VH/CP",+ "x": 2.225,+ "y": -0.5,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "15",+ "text": "RT",+ "x": 2.225,+ "y": -1.0,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "16",+ "text": "VREF/RANGE",+ "x": 1.0,+ "y": -2.225,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "17",+ "text": "SS",+ "x": 0.5,+ "y": -2.225,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "18",+ "text": "TRK",+ "x": 0.0,+ "y": -2.225,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "19",+ "text": "AGND",+ "x": -0.5,+ "y": -2.225,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "20",+ "text": "COMP",+ "x": -1.0,+ "y": -2.225,+ "align": "left",+ "vertical": true,+ "h": 0.25+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -1.6875,+ -1.0+ ],+ "size_mm": [+ 0.875,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -1.6875,+ -0.5+ ],+ "size_mm": [+ 0.875,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -1.6875,+ 0.0+ ],+ "size_mm": [+ 0.875,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -1.6875,+ 0.5+ ],+ "size_mm": [+ 0.875,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ -1.6875,+ 1.0+ ],+ "size_mm": [+ 0.875,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ -1.0,+ 1.6875+ ],+ "size_mm": [+ 0.25,+ 0.875+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ -0.5,+ 1.6875+ ],+ "size_mm": [+ 0.25,+ 0.875+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ 0.0,+ 1.6875+ ],+ "size_mm": [+ 0.25,+ 0.875+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "roundrect",+ "center_mm": [+ 0.5,+ 1.6875+ ],+ "size_mm": [+ 0.25,+ 0.875+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "roundrect",+ "center_mm": [+ 1.0,+ 1.6875+ ],+ "size_mm": [+ 0.25,+ 0.875+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "roundrect",+ "center_mm": [+ 1.6875,+ 1.0+ ],+ "size_mm": [+ 0.875,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "roundrect",+ "center_mm": [+ 1.6875,+ 0.5+ ],+ "size_mm": [+ 0.875,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "roundrect",+ "center_mm": [+ 1.6875,+ 0.0+ ],+ "size_mm": [+ 0.875,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "roundrect",+ "center_mm": [+ 1.6875,+ -0.5+ ],+ "size_mm": [+ 0.875,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "roundrect",+ "center_mm": [+ 1.6875,+ -1.0+ ],+ "size_mm": [+ 0.875,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "16",+ "shape": "roundrect",+ "center_mm": [+ 1.0,+ -1.6875+ ],+ "size_mm": [+ 0.25,+ 0.875+ ],+ "rot": 0.0+ },+ {+ "number": "17",+ "shape": "roundrect",+ "center_mm": [+ 0.5,+ -1.6875+ ],+ "size_mm": [+ 0.25,+ 0.875+ ],+ "rot": 0.0+ },+ {+ "number": "18",+ "shape": "roundrect",+ "center_mm": [+ 0.0,+ -1.6875+ ],+ "size_mm": [+ 0.25,+ 0.875+ ],+ "rot": 0.0+ },+ {+ "number": "19",+ "shape": "roundrect",+ "center_mm": [+ -0.5,+ -1.6875+ ],+ "size_mm": [+ 0.25,+ 0.875+ ],+ "rot": 0.0+ },+ {+ "number": "20",+ "shape": "roundrect",+ "center_mm": [+ -1.0,+ -1.6875+ ],+ "size_mm": [+ 0.25,+ 0.875+ ],+ "rot": 0.0+ },+ {+ "number": "21",+ "shape": "rect",+ "center_mm": [+ 0.0,+ 0.0+ ],+ "size_mm": [+ 2.0,+ 2.0+ ],+ "rot": 0.0+ }+ ]+}
package.json+55−38@@ -1,6 +1,6 @@ { "slug": "lm5123qrgrrq1",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Texas Instruments DC-DC Converters, VQFN-20(3.5x3.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -26,7 +26,10 @@ "docs/hero.png", "docs/lm5123qrgrrq1-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "lm5123qrgrrq1-etched.step",+ "lm5123qrgrrq1-hero.glb",+ "lm5123qrgrrq1-hero.overlay.json" ], "component": { "mpn": "LM5123QRGRRQ1",@@ -51,12 +54,11 @@ "mouser": "595-LM5123QRGRRQ1" }, "distributor_check": {- "checked_at": "2026-10-01T18:02:26Z",+ "checked_at": "2026-10-01T18:22:12Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "296-LM5123QRGRRQ1TR-ND",- "status": "found",- "lifecycle": "Active"+ "status": "found" }, "mouser": { "pn": "595-LM5123QRGRRQ1",@@ -68,121 +70,121 @@ "number": "1", "name": "CSP", "type": "input",- "description": "Current sensing amplifier positive input pin."+ "description": "Current sensing amplifier positive input pin for inductor current feedback with 0.8V to 42V operating range." }, { "number": "2", "name": "CSN", "type": "input",- "description": "Current sensing amplifier negative input pin."+ "description": "Current sensing amplifier negative input pin with 60mV peak current limiting threshold and 0.8V to 42V maximum rating." }, { "number": "3", "name": "VOUT/SENSE", "type": "input",- "description": "Output voltage sensing pin; high-side MOSFET drain voltage sensing pin connected to drain via short low-impedance path."+ "description": "Output voltage sensing pin for internal feedback divider requiring 0.1µF bypass capacitor with 5V to 57V operating range." }, { "number": "4", "name": "PGOOD",- "type": "output",- "description": "Power good indicator with open-drain output stage; must be pulled to ground when output voltage is below threshold."+ "type": "tri_state",+ "description": "Open-drain power good indicator output pin with 5kΩ to 100kΩ external pull-up resistor transitioning on output voltage under-voltage threshold." }, { "number": "5", "name": "HO", "type": "output",- "description": "High-side gate driver output connected to high-side N-channel MOSFET gate via short low-impedance path."+ "description": "High side gate driver output sourcing 2.2A peak and sinking 3.3A peak current directly to high-side N-channel MOSFET gate." }, { "number": "6", "name": "SW", "type": "passive",- "description": "Switch node connection and high-side MOSFET source voltage sensing pin; connected to high-side MOSFET source and low-side MOSFET drain via short low-impedance path."+ "description": "Synchronous boost switch node connection between high and low-side MOSFETs providing dynamic switching operation and voltage sensing." }, { "number": "7", "name": "HB", "type": "passive",- "description": "High-side driver power supply with internal bootstrap diode connected from VCC; connect 0.1μF capacitor between this pin and SW."+ "description": "Bootstrap driver supply pin charged from VCC through internal bootstrap diode requiring 0.1µF capacitor between HB and SW." }, { "number": "8", "name": "BIAS", "type": "power_in",- "description": "Power supply input voltage for VCC regulator; accepts 3.8V to 42V; connect 1μF capacitor between pin and ground."+ "description": "VCC regulator power supply input accepting 3.8V to 42V range with 1µF bypass capacitor supporting 0.8V minimum boost input when BIAS ≥ 3.8V." }, { "number": "9", "name": "VCC", "type": "power_out",- "description": "Internal VCC regulator output (5V nominal) and power supply for internal MOSFET drivers; connect 4.7μF capacitor between pin and PGND."+ "description": "Internal regulated 5V power supply output (4.75V to 5.25V) requiring 4.7µF bypass capacitor and 100mA minimum pull current during device configuration." }, { "number": "10", "name": "PGND", "type": "power_in",- "description": "Power ground pin connected directly to low-side N-channel MOSFET source via short low-impedance path."+ "description": "Power ground pin for low-side N-channel MOSFET source requiring short low-impedance path to ground plane." }, { "number": "11", "name": "LO", "type": "output",- "description": "Low-side gate driver output connected to low-side N-channel MOSFET gate via short low-impedance path."+ "description": "Low side gate driver output sourcing 2.2A peak and sinking 3.3A peak current with adaptive dead-time control to low-side MOSFET gate." }, { "number": "12", "name": "MODE", "type": "input",- "description": "Device switching mode selection pin for FPWM, diode emulation, and skip modes; open or >500kΩ to AGND selects skip mode, <0.4V selects DE mode, >2.0V selects FPWM mode."+ "description": "Switching mode selection pin configured at startup for skip mode (open or >500kΩ to AGND), diode emulation mode (<0.4V), or FPWM mode (>2.0V/VCC) with dynamic mode switching." }, { "number": "13", "name": "UVLO/EN", "type": "input",- "description": "Enable pin and line under-voltage lockout programming pin; device turns off below 0.35V and enables above 0.65V; connect voltage divider to supply voltage and ground."+ "description": "Enable pin requiring 0.65V minimum for device enable with 0.55V typical threshold, 90mV hysteresis, and programmable under-voltage lockout via external resistor divider to AGND." }, { "number": "14", "name": "SYNC/DITHER/VH/CP", "type": "bidirectional",- "description": "Synchronization clock input, clock dither and spread spectrum modulation programming pin, VCC hold pin for fast restart, and charge pump enable pin for bypass operation."+ "description": "Multiplex pin functioning as external synchronous clock input (0.75×fRT to 1.5×fRT), spread spectrum dither capacitor pin (±6% to +5% modulation), VCC hold pin when >2.0V, and charge pump enable pin when >2.0V." }, { "number": "15", "name": "RT", "type": "input",- "description": "Switching frequency setting pin; connect single resistor between pin and AGND to program frequency from 100kHz to 2.2MHz without external clock on SYNC pin."+ "description": "Switching frequency programming pin regulated at 0.5V for 100kHz to 2.2MHz operation via external resistor with dynamic frequency programming during operation." }, { "number": "16", "name": "VREF/RANGE", "type": "power_in",- "description": "1.0V internal reference voltage output and VOUT range selection pin; connect 470pF capacitor to AGND; output voltage range selected by resistor divider during configuration (75-100kΩ for 5-20V, 20-35kΩ for 15-57V)."+ "description": "1.0V internal reference voltage output with 330pF to 1nF bypass capacitor requirement and VOUT range selection pin configured at startup with 75kΩ to 100kΩ (5V-20V) or 20kΩ to 35kΩ (15V-57V)." }, { "number": "17", "name": "SS", "type": "bidirectional",- "description": "Soft start time programming pin; external capacitor and internal 20μA current source set soft start ramp rate of error amplifier reference during startup."+ "description": "Soft start capacitor pin charged by 20µA internal current source providing 120µs ramp with forced diode emulation below 1.5V and SS-FB clamp at 55mV above feedback voltage." }, { "number": "18", "name": "TRK", "type": "input",- "description": "Output regulation target programming pin; VOUT regulated voltage programmed by voltage divider to VREF or direct D/A control; recommended operating voltage 0.25V to 1.0V."+ "description": "Output regulation target programming pin accepting 0.25V to 0.95V input voltage for dynamic output voltage control from external DAC or resistor divider to VREF." }, { "number": "19", "name": "AGND", "type": "power_in",- "description": "Analog ground pin connected to analog ground plane via wide short path."+ "description": "Analog ground pin for low-level signal reference requiring connection to analog ground plane via short wide path." }, { "number": "20", "name": "COMP", "type": "output",- "description": "Transconductive error amplifier output; connect loop compensation network between pin and AGND."+ "description": "Error amplifier output pin providing compensation network interface with 10MΩ output impedance and 3MHz bandwidth for loop filter design." }, { "number": "21",@@ -192,21 +194,21 @@ } ], "provenance": {- "extractor": "extract_pins 0.2",+ "extractor": "extract_pins 0.3", "factory_chain": { "factory": "2.0.0",- "extractor": "extract_pins 0.2",+ "extractor": "extract_pins 0.3", "primary_model": "claude-haiku-4-5-20251001", "primary_mode": "text",- "consensus_model": "claude-sonnet-4-6",+ "consensus_model": "claude-sonnet-5-5", "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Pin 6 (SW) is classified as 'passive' rather than bidirectional because it serves as both a switch n; Pin 14 (SYNC/DITHER/VH/CP) has multiple functions mixed (sync input, dither capacitor terminal, VCC ; Exposed pad (EP) is not included in the pin list as it is not a numbered pin but is specified to be "+ "extractor flagged: Exposed pad (EP) specifications provided from datasheet but not assigned a pin number in standard nu" ],- "pages_sent": 46,- "cost_usd": 0.478,- "at": "2026-10-01T18:02:04"+ "pages_sent": 31,+ "cost_usd": 0.3094,+ "at": "2026-10-01T18:22:05" }, "datasheet": { "url": "https://www.ti.com/cn/lit/gpn/lm5123-q1",@@ -239,8 +241,8 @@ 3.52, 0.9 ],- "zmin_mm": 0.0,- "centre_offset_mm": 0.0,+ "zmin_mm": 0,+ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "93d618507701060c921df8150432781b0adab6320d5a1b067bf6baad49c2ae65", "checked": "2026-10-07",@@ -258,13 +260,28 @@ 3.52, 0.9 ],- "zmin_mm": 0.0,- "centre_offset_mm": 0.0,+ "zmin_mm": 0,+ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "d49c889820d6757653bb261cd2eecb420286e1cb2551a9991e62d68abbb54614", "checked": "2026-10-16", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]- }+ },+ "title": "LM5123QRGRRQ1",+ "brief": "Texas Instruments DC-DC Converters, VQFN-20(3.5x3.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "metadata": {+ "specs": {+ "Manufacturer": "Texas Instruments",+ "Package": "VQFN-20(3.5x3.5)",+ "Category": "Power Management (PMIC)",+ "Pins": "21"+ }+ },+ "discovery_triggers": [+ "lm5123qrgrrq1"+ ],+ "discovery_pitch": "LM5123QRGRRQ1 (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",+ "visibility": "public" }
page.json+9−6@@ -4,7 +4,7 @@ "slug": "lm5123qrgrrq1", "title": "LM5123QRGRRQ1", "brief": "Texas Instruments DC-DC Converters, VQFN-20(3.5x3.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -290,9 +290,12 @@ "docs/hero.png", "docs/lm5123qrgrrq1-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "lm5123qrgrrq1-etched.step",+ "lm5123qrgrrq1-hero.glb",+ "lm5123qrgrrq1-hero.overlay.json" ],- "visibility": {- "public": true- }-}+ "visibility": "public",+ "description": "Texas Instruments DC-DC Converters, VQFN-20(3.5x3.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom"+}