main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lm51231qrgrrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lm51231qrgrrq1: viewers · Ray
lm51231qrgrrq1-etched.fit.json lm51231qrgrrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm51231qrgrrq1-etched.glb lm51231qrgrrq1: etched from the flattened plain STEP (service-occt 1.6.0, from the plain STEP) · Ray
lm51231qrgrrq1-etched.step lm51231qrgrrq1: etched from the flattened plain STEP (service-occt 1.6.0, from the plain STEP) · Ray
lm51231qrgrrq1-hero.glb lm51231qrgrrq1: hero from the plain model · Ray
lm51231qrgrrq1-hero.overlay.json lm51231qrgrrq1: hero from the plain model · Ray
lm51231qrgrrq1.glb plain STEP: one free product with face colours (generated model was nested; tscircuit read it white) · Ray
lm51231qrgrrq1.kicad_mod Publish 0.1.0 · Ray
lm51231qrgrrq1.kicad_sym Publish 0.1.0 · Ray
lm51231qrgrrq1.lbr Publish 0.1.0 · Ray
lm51231qrgrrq1.step plain STEP: one free product with face colours (generated model was nested; tscircuit read it white) · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Initial commit: component/lm51231qrgrrq1 · Ray

LM51231QRGRRQ1

Texas Instruments · DC-DC Converters · VQFN-20(3.5x3.5)

LM51231QRGRRQ1 from Texas Instruments, in a VQFN-20(3.5x3.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CSP input Current sense amplifier positive input pin operating from 0.8 V to 42 V with 10 V/V gain.
2 CSN input Current sense amplifier negative input pin with 1 µA bias current operating from 0.8 V to 42 V.
3 VOUT/SENSE input Output voltage sensing input connected to high-side MOSFET drain through short low-inductance path with 0.1-μF bypass capacitor.
4 PGOOD output Open-drain power-good indicator output asserts when VOUT exceeds undervoltage threshold of 94% of regulation target.
5 HO output High-side MOSFET gate driver output with 2.2 A peak sourcing current and adaptive deadtime control.
6 SW power_in Switching node connection between high-side MOSFET source and low-side MOSFET drain connected through short low-inductance path.
7 HB power_in High-side driver bootstrap supply powered by internal boot diode from VCC with 2.5 V minimum HB-SW UVLO threshold and 0.1-μF bypass capacitor.
8 BIAS power_in Supply voltage input (3.8 V to 42 V) to VCC regulator with 1-μF bypass capacitor and 3 µA shutdown current.
9 VCC power_in 5-V regulated gate driver supply output with 100 mA sourcing current limit and 4.7-μF bypass capacitor.
10 PGND power_in Power ground pin connected directly to low-side MOSFET source and power ground plane through short low-inductance path.
11 LO output Low-side MOSFET gate driver output with 3.3 A peak sinking current and independent adaptive deadtime control.
12 MODE input Switching mode selection input; voltage less than 0.4 V selects diode emulation mode, greater than 2.0 V selects forced PWM mode.
13 UVLO/EN input Device enable input with 0.45 V rising threshold and 0.35 V falling threshold, or UVLO programming through resistor voltage divider to AGND.
14 SYNC/DITHER/VH bidirectional Synchronization clock input (200-2200 kHz), spread spectrum dithering capacitor connection, or VCC hold pin for fast restart when voltage exceeds 2.0 V.
15 RT input Switching frequency setting input regulated to 0.5 V with single resistor to AGND programming frequency from 100 kHz to 2.2 MHz.
16 VREF/RANGE power_in 1.0-V internal reference voltage output with 470-pF bypass capacitor and output voltage range selection through resistor divider (5-20 V or 15-57 V).
17 SS bidirectional Soft-start capacitor connection charged by 20-μA internal current source with 1.5 V mode transition threshold from forced diode emulation to FPWM.
18 TRK input Output voltage regulation target programming input accepting 0.25 V to 1.0 V from D/A converter or resistor divider to VREF.
19 AGND power_in Analog ground reference connected to analog ground plane through wide and short path.
20 COMP output Error amplifier output with 10 MΩ output impedance and 3 MHz bandwidth for external Type-2 compensation network.
21 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-20(3.5x3.5)
Category Power Management (PMIC)
Pins 21

CAD (KiCad official)

  • Symbol: LM51231QRGRRQ1
  • Footprint: Package_DFN_QFN:QFN-20-1EP_3.5x3.5mm_P0.5mm_EP2x2mm
  • 3D model: VQFN-20(3.5x3.5), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: lm51231qrgrrq1-etched.step / lm51231qrgrrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm51231qrgrrq1.step / lm51231qrgrrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (44 pp, sha256 8614b882433fad2d, retrieved 2026-10-01, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF