← Commit history
lm51231qrgrrq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+91−11
package.json+49−9@@ -74,13 +74,13 @@ "number": "2", "name": "CSN", "type": "input",- "description": "Current sense amplifier negative input pin with 1 \u00b5A bias current operating from 0.8 V to 42 V."+ "description": "Current sense amplifier negative input pin with 1 µA bias current operating from 0.8 V to 42 V." }, { "number": "3", "name": "VOUT/SENSE", "type": "input",- "description": "Output voltage sensing input connected to high-side MOSFET drain through short low-inductance path with 0.1-\u03bcF bypass capacitor."+ "description": "Output voltage sensing input connected to high-side MOSFET drain through short low-inductance path with 0.1-μF bypass capacitor." }, { "number": "4",@@ -104,19 +104,19 @@ "number": "7", "name": "HB", "type": "power_in",- "description": "High-side driver bootstrap supply powered by internal boot diode from VCC with 2.5 V minimum HB-SW UVLO threshold and 0.1-\u03bcF bypass capacitor."+ "description": "High-side driver bootstrap supply powered by internal boot diode from VCC with 2.5 V minimum HB-SW UVLO threshold and 0.1-μF bypass capacitor." }, { "number": "8", "name": "BIAS", "type": "power_in",- "description": "Supply voltage input (3.8 V to 42 V) to VCC regulator with 1-\u03bcF bypass capacitor and 3 \u00b5A shutdown current."+ "description": "Supply voltage input (3.8 V to 42 V) to VCC regulator with 1-μF bypass capacitor and 3 µA shutdown current." }, { "number": "9", "name": "VCC", "type": "power_in",- "description": "5-V regulated gate driver supply output with 100 mA sourcing current limit and 4.7-\u03bcF bypass capacitor."+ "description": "5-V regulated gate driver supply output with 100 mA sourcing current limit and 4.7-μF bypass capacitor." }, { "number": "10",@@ -164,7 +164,7 @@ "number": "17", "name": "SS", "type": "bidirectional",- "description": "Soft-start capacitor connection charged by 20-\u03bcA internal current source with 1.5 V mode transition threshold from forced diode emulation to FPWM."+ "description": "Soft-start capacitor connection charged by 20-μA internal current source with 1.5 V mode transition threshold from forced diode emulation to FPWM." }, { "number": "18",@@ -182,7 +182,7 @@ "number": "20", "name": "COMP", "type": "output",- "description": "Error amplifier output with 10 M\u03a9 output impedance and 3 MHz bandwidth for external Type-2 compensation network."+ "description": "Error amplifier output with 10 MΩ output impedance and 3 MHz bandwidth for external Type-2 compensation network." }, { "number": "21",@@ -225,6 +225,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "lm51231qrgrrq1.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.52,+ 3.52,+ 0.9+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "b4f48cf59811f3f65bd9dad6b678f34ef876d9347ce62e5c3a7b2a6fa6c90751",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lm51231qrgrrq1-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.52,+ 3.52,+ 0.9+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "1b4df3c553f4b70b288ea79195524b4ec7c05609f70bd49ff65d2981b573c226",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -210,7 +210,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "lm51231qrgrrq1.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.52,+ 3.52,+ 0.9+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "b4f48cf59811f3f65bd9dad6b678f34ef876d9347ce62e5c3a7b2a6fa6c90751",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lm51231qrgrrq1-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.52,+ 3.52,+ 0.9+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "1b4df3c553f4b70b288ea79195524b4ec7c05609f70bd49ff65d2981b573c226",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -257,4 +297,4 @@ "visibility": { "public": true }-}+}