main
History Download
Ray Initial commit: component/lm5118mhx 906b828

LM5118MHX

Texas Instruments · DC-DC Converters · TSSOP-20-EP

LM5118MHX from Texas Instruments, in a TSSOP-20-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input supply voltage to the controller; 3 V to 75 V operating range with 5 V minimum for startup.
2 UVLO input Undervoltage lockout input; regulator enters standby mode when below 1.23 V, resumes normal operation when above 1.23 V.
3 RT input Oscillator frequency-setting pin; connect resistor to AGND to set switching frequency from 50 kHz to 500 kHz.
4 EN input Enable input; below 0.5 V enters shutdown drawing less than 10 µA from VIN, above 3 V enables normal operation.
5 RAMP input Ramp control signal pin; external capacitor to AGND sets ramp slope for emulated current mode control.
6 AGND power_in Analog ground reference.
7 SS input Soft start input; external capacitor and 10-µA current source set error amplifier reference rise time.
8 FB input Feedback signal input from regulated output; connect to inverting input of internal error amplifier.
9 COMP output Error amplifier output; connect loop compensation network between COMP and FB.
10 VOUT input Output voltage monitor input for emulated current mode control; connect directly to regulated output.
11 SYNC input Synchronization input for switching regulator to external clock with falling edge threshold of 1.3 V.
12 CS input Current sense input; connect to the diode side of current sense resistor with cycle-by-cycle threshold of -125 mV in buck mode.
13 CSG input Current sense ground input; connect to ground side of current sense resistor.
14 PGND power_in Power ground reference.
15 LO output Boost MOSFET gate drive output with peak source current 2.2 A and sink current 2.7 A; connect to external boost MOSFET gate.
16 VCC power_out Bias regulator output supplying 7 V (typical) for controller and gate drivers with 35 mA sourcing current limit.
17 VCCX power_in Optional external bias supply input; disables internal VCC regulator when above 3.85 V.
18 HB input High-side gate driver bootstrap supply node with 15 V rating; connect bootstrap capacitor between HB and HS.
19 HO output Buck MOSFET gate drive output with peak source current 2.2 A and sink current 3.5 A; connect to high-side buck MOSFET gate.
20 HS input Buck MOSFET source pin; connect to source terminal of high-side buck MOSFET and bootstrap capacitor.
21 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-20-EP
Category Power Management (PMIC)
Pins 21

CAD (KiCad official)

  • Symbol: LM5118MHX
  • Footprint: Package_SO:TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm
  • 3D model: TSSOP-20-EP, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm nominal TSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: lm5118mhx-etched.step / lm5118mhx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm5118mhx.step / lm5118mhx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (48 pp, sha256 a7cd61394358d330, retrieved 2026-10-01, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF