main
History Download
Ray lm5118mh: factory component page (tier=lcsc) b151a92

LM5118MH

Texas Instruments · DC-DC Converters · HTSSOP-20-EP

LM5118MH from Texas Instruments, in a HTSSOP-20-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input supply voltage (3V to 75V).
2 UVLO input Undervoltage lockout input; standby mode below 1.23V, normal operation above 1.23V.
3 RT input Oscillator frequency setting via resistor to AGND; range 50kHz to 500kHz.
4 EN input Enable input; low power (<10µA) when below 0.5V, normal operation when above 3V.
5 RAMP input Ramp control input; external capacitor to AGND sets emulated current mode ramp slope.
6 AGND power_in Analog ground.
7 SS input Soft start input; external capacitor with 10µA internal source sets error amplifier reference rise time.
8 FB input Feedback signal input to inverting input of error amplifier from regulated output.
9 COMP output Error amplifier output; connect loop compensation network between COMP and FB pin.
10 VOUT input Output voltage monitor input for emulated current mode control; connect to regulated output.
11 SYNC input External clock synchronization input for switching regulator frequency.
12 CS input Current sense input; connect to diode side of current sense resistor.
13 CSG input Current sense ground reference input; connect to ground side of current sense resistor.
14 PGND power_in Power ground.
15 LO output Boost MOSFET gate drive output; connect to gate of external boost MOSFET.
16 VCC power_out Bias regulator output (4.75V to 14V); decouple to PGND with low ESR/ESL capacitor.
17 VCCX power_in Optional external bias supply input; disables internal VCC regulator when above 3.9V, connect to AGND if unused.
18 HB input Bootstrap capacitor supply for high-side gate driver; capacitor connected between HB and HS.
19 HO output Buck MOSFET gate drive output; connect to gate of high-side buck MOSFET.
20 HS input Buck MOSFET source reference; connect to high-side MOSFET source and bootstrap capacitor.
21 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HTSSOP-20-EP
Category Power Management (PMIC)
Pins 21

CAD (KiCad official)

  • Symbol: LM5118MH
  • Footprint: Package_SO:TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm
  • 3D model: HTSSOP-20-EP (KiCad packages3D, STEP)
  • 3D model files: lm5118mh-etched.step / lm5118mh-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm5118mh.step / lm5118mh.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (48 pp, sha256 a7cd61394358d330, retrieved 2026-10-01, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF