main
Ray lm5117psqe: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) af6f6d5
{
  "schema_version": 1,
  "type": "component",
  "slug": "lm5117psqe",
  "title": "LM5117PSQE",
  "brief": "Texas Instruments DC-DC Controllers, WQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power supply chip",
    "lm5117psqe",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "LM5117PSQE",
    "manufacturer": "Texas Instruments",
    "package": "WQFN-24-EP(4x4)",
    "pin_count": 25,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Controllers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lm5117",
    "parts": {
      "symbol": "lm5117psqe.kicad_sym",
      "footprint": "lm5117psqe.kicad_mod",
      "model_3d": "lm5117psqe-etched.glb",
      "model_3d_plain": "lm5117psqe.glb",
      "model_3d_step": "lm5117psqe-etched.step",
      "model_3d_step_plain": "lm5117psqe.step",
      "lbr": "lm5117psqe.lbr"
    },
    "distributor_links": {
      "lcsc": "C2658242"
    },
    "pins": [
      {
        "number": "1",
        "name": "DEMB",
        "type": "input",
        "description": "Optional logic input that enables diode emulation mode when held low; internal 50-kΩ pull-down enables diode emulation if pin is left floating."
      },
      {
        "number": "2",
        "name": "RES",
        "type": "output",
        "description": "Restart timer pin configured by external capacitor; 10-μA internal current source charges to 1.25-V threshold after 256 consecutive cycles of current limiting."
      },
      {
        "number": "3",
        "name": "SS",
        "type": "input",
        "description": "Soft-start pin charged by 10-μA internal current source; determines ramp rate of output voltage and is held low when VCC < 5V or UVLO < 1.25V."
      },
      {
        "number": "4",
        "name": "RT",
        "type": "input",
        "description": "Oscillator programming pin; single external resistor sets switching frequency from 50kHz to 750kHz and can be synchronized to external clock."
      },
      {
        "number": "5",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground return for internal 0.8-V precision reference and all analog circuits."
      },
      {
        "number": "6",
        "name": "NC",
        "type": "unconnected",
        "description": "No electrical connection."
      },
      {
        "number": "7",
        "name": "VCCDIS",
        "type": "input",
        "description": "VCC regulator disable input; internal regulator is disabled when voltage exceeds 1.25V threshold with 500-kΩ internal pull-down resistor."
      },
      {
        "number": "8",
        "name": "FB",
        "type": "input",
        "description": "Error amplifier feedback input with 0.8-V regulation threshold; external resistor divider from output sets regulated output voltage."
      },
      {
        "number": "9",
        "name": "COMP",
        "type": "output",
        "description": "Error amplifier output node; loop compensation network (RCOMP, CCOMP, CHF) is connected between COMP and FB pins."
      },
      {
        "number": "10",
        "name": "CM",
        "type": "output",
        "description": "Current monitor output providing average of sensed inductor current; monitor directly between CM and AGND with bandwidth approximately one-tenth of switching frequency."
      },
      {
        "number": "11",
        "name": "RAMP",
        "type": "input",
        "description": "PWM ramp signal pin; external RC network (RRAMP, CRAMP) between SW, RAMP, and AGND generates emulated inductor current ramp with slope proportional to input voltage."
      },
      {
        "number": "12",
        "name": "CS",
        "type": "input",
        "description": "Current sense amplifier input with 10V/V gain and 120-mV sense voltage threshold; connect to high-side of external current sense resistor."
      },
      {
        "number": "13",
        "name": "CSG",
        "type": "power_in",
        "description": "Kelvin ground connection for current sense resistor; connect directly to low-side of external current sense resistor for accurate current measurement."
      },
      {
        "number": "14",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground return for low-side NMOS gate driver; connect directly to current sense resistor ground and system return."
      },
      {
        "number": "15",
        "name": "LO",
        "type": "output",
        "description": "Low-side NMOS gate drive output with 3.3-A sink current and 2.5-A source current; adaptive dead-time logic prevents simultaneous conduction with HO."
      },
      {
        "number": "16",
        "name": "VCC",
        "type": "power_out",
        "description": "Bias supply output regulated to 7.6V by internal regulator or supplied externally when VCCDIS exceeds 1.25V threshold."
      },
      {
        "number": "17",
        "name": "NC",
        "type": "unconnected",
        "description": "No electrical connection."
      },
      {
        "number": "18",
        "name": "SW",
        "type": "output",
        "description": "Switching node of the buck regulator; common connection point for bootstrap capacitor, high-side NMOS source terminal, and low-side NMOS drain terminal."
      },
      {
        "number": "19",
        "name": "HO",
        "type": "output",
        "description": "High-side NMOS gate drive output with 3.3-A sink current and 2.2-A source current; maximum low-state voltage drop 100mV."
      },
      {
        "number": "20",
        "name": "HB",
        "type": "power_in",
        "description": "Bootstrap supply pin for high-side gate driver; connect to bootstrap diode cathode and bootstrap capacitor, typically maintains 7.6V above SW node."
      },
      {
        "number": "21",
        "name": "NC",
        "type": "unconnected",
        "description": "No electrical connection."
      },
      {
        "number": "22",
        "name": "VIN",
        "type": "power_in",
        "description": "Supply voltage input for internal VCC regulator; minimum VIN of 5.5V required for VCC regulation, maximum 65V absolute maximum rating."
      },
      {
        "number": "23",
        "name": "NC",
        "type": "unconnected",
        "description": "No electrical connection."
      },
      {
        "number": "24",
        "name": "UVLO",
        "type": "input",
        "description": "Undervoltage lockout programming pin with external resistor divider setting threshold; regulator shutdown below 0.4V, standby 0.4V-1.25V, normal operation above 1.25V."
      },
      {
        "number": "25",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "exposed pad 25 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 49,
        "cost_usd": 0.6191,
        "at": "2026-09-17T18:53:42"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lm5117",
        "pages": 49,
        "sha256": "9e27f24e84faebf5",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm5117psqe.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "f7d256794c4147daf24dcae0554fae18510315e565ad1e239b475be7fef80d8b",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm5117psqe-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "7e1cbfc12a917eb1a3762bf46d0250cecec4325cc1370c224cf81a29a6770a1a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "WQFN-24-EP(4x4)",
      "Category": "Power Supply Chip",
      "Pins": "25"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lm5117psqe"
  ],
  "discovery_pitch": "LM5117PSQE (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm5117psqe.kicad_sym",
    "lm5117psqe.kicad_mod",
    "lm5117psqe.glb",
    "lm5117psqe.step",
    "lm5117psqe.lbr",
    "docs/hero.png",
    "docs/lm5117psqe-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-28T17:02:49.763Z"
}