component
LM5117PSQE
Public Made by Adomby adom
Texas Instruments DC-DC Controllers, WQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
lm5117psqe: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
af6f6d5
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278
{
"slug": "lm5117psqe",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments DC-DC Controllers, WQFN-24-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power supply chip",
"lm5117psqe",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lm5117psqe.kicad_sym",
"lm5117psqe.kicad_mod",
"lm5117psqe.glb",
"lm5117psqe.step",
"lm5117psqe.lbr",
"docs/hero.png",
"docs/lm5117psqe-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"component": {
"mpn": "LM5117PSQE",
"manufacturer": "Texas Instruments",
"package": "WQFN-24-EP(4x4)",
"pin_count": 25,
"category": "Power Supply Chip",
"subcategory": "DC-DC Controllers",
"datasheet": "https://www.ti.com/cn/lit/gpn/lm5117",
"parts": {
"symbol": "lm5117psqe.kicad_sym",
"footprint": "lm5117psqe.kicad_mod",
"model_3d": "lm5117psqe.glb",
"model_3d_step": "lm5117psqe.step",
"lbr": "lm5117psqe.lbr"
},
"distributor_links": {
"lcsc": "C2658242"
},
"pins": [
{
"number": "1",
"name": "DEMB",
"type": "input",
"description": "Optional logic input that enables diode emulation mode when held low; internal 50-kΩ pull-down enables diode emulation if pin is left floating."
},
{
"number": "2",
"name": "RES",
"type": "output",
"description": "Restart timer pin configured by external capacitor; 10-μA internal current source charges to 1.25-V threshold after 256 consecutive cycles of current limiting."
},
{
"number": "3",
"name": "SS",
"type": "input",
"description": "Soft-start pin charged by 10-μA internal current source; determines ramp rate of output voltage and is held low when VCC < 5V or UVLO < 1.25V."
},
{
"number": "4",
"name": "RT",
"type": "input",
"description": "Oscillator programming pin; single external resistor sets switching frequency from 50kHz to 750kHz and can be synchronized to external clock."
},
{
"number": "5",
"name": "AGND",
"type": "power_in",
"description": "Analog ground return for internal 0.8-V precision reference and all analog circuits."
},
{
"number": "6",
"name": "NC",
"type": "unconnected",
"description": "No electrical connection."
},
{
"number": "7",
"name": "VCCDIS",
"type": "input",
"description": "VCC regulator disable input; internal regulator is disabled when voltage exceeds 1.25V threshold with 500-kΩ internal pull-down resistor."
},
{
"number": "8",
"name": "FB",
"type": "input",
"description": "Error amplifier feedback input with 0.8-V regulation threshold; external resistor divider from output sets regulated output voltage."
},
{
"number": "9",
"name": "COMP",
"type": "output",
"description": "Error amplifier output node; loop compensation network (RCOMP, CCOMP, CHF) is connected between COMP and FB pins."
},
{
"number": "10",
"name": "CM",
"type": "output",
"description": "Current monitor output providing average of sensed inductor current; monitor directly between CM and AGND with bandwidth approximately one-tenth of switching frequency."
},
{
"number": "11",
"name": "RAMP",
"type": "input",
"description": "PWM ramp signal pin; external RC network (RRAMP, CRAMP) between SW, RAMP, and AGND generates emulated inductor current ramp with slope proportional to input voltage."
},
{
"number": "12",
"name": "CS",
"type": "input",
"description": "Current sense amplifier input with 10V/V gain and 120-mV sense voltage threshold; connect to high-side of external current sense resistor."
},
{
"number": "13",
"name": "CSG",
"type": "power_in",
"description": "Kelvin ground connection for current sense resistor; connect directly to low-side of external current sense resistor for accurate current measurement."
},
{
"number": "14",
"name": "PGND",
"type": "power_in",
"description": "Power ground return for low-side NMOS gate driver; connect directly to current sense resistor ground and system return."
},
{
"number": "15",
"name": "LO",
"type": "output",
"description": "Low-side NMOS gate drive output with 3.3-A sink current and 2.5-A source current; adaptive dead-time logic prevents simultaneous conduction with HO."
},
{
"number": "16",
"name": "VCC",
"type": "power_out",
"description": "Bias supply output regulated to 7.6V by internal regulator or supplied externally when VCCDIS exceeds 1.25V threshold."
},
{
"number": "17",
"name": "NC",
"type": "unconnected",
"description": "No electrical connection."
},
{
"number": "18",
"name": "SW",
"type": "output",
"description": "Switching node of the buck regulator; common connection point for bootstrap capacitor, high-side NMOS source terminal, and low-side NMOS drain terminal."
},
{
"number": "19",
"name": "HO",
"type": "output",
"description": "High-side NMOS gate drive output with 3.3-A sink current and 2.2-A source current; maximum low-state voltage drop 100mV."
},
{
"number": "20",
"name": "HB",
"type": "power_in",
"description": "Bootstrap supply pin for high-side gate driver; connect to bootstrap diode cathode and bootstrap capacitor, typically maintains 7.6V above SW node."
},
{
"number": "21",
"name": "NC",
"type": "unconnected",
"description": "No electrical connection."
},
{
"number": "22",
"name": "VIN",
"type": "power_in",
"description": "Supply voltage input for internal VCC regulator; minimum VIN of 5.5V required for VCC regulation, maximum 65V absolute maximum rating."
},
{
"number": "23",
"name": "NC",
"type": "unconnected",
"description": "No electrical connection."
},
{
"number": "24",
"name": "UVLO",
"type": "input",
"description": "Undervoltage lockout programming pin with external resistor divider setting threshold; regulator shutdown below 0.4V, standby 0.4V-1.25V, normal operation above 1.25V."
},
{
"number": "25",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.2",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.2",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-4-6",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"exposed pad 25 added from the footprint",
"dropped thermal pad ['EP'] absent from footprint"
],
"pages_sent": 49,
"cost_usd": 0.6191,
"at": "2026-09-17T18:53:42"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/lm5117",
"pages": 49,
"sha256": "9e27f24e84faebf5",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 25,
"described": 25,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lm5117psqe.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.0,
4.0,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "f7d256794c4147daf24dcae0554fae18510315e565ad1e239b475be7fef80d8b",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lm5117psqe-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.0,
4.0,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "7e1cbfc12a917eb1a3762bf46d0250cecec4325cc1370c224cf81a29a6770a1a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}