component
LM5106MMX
Public Made by Adomby adom
Texas Instruments Gate Drivers, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM5106MMX
Texas Instruments · Gate Drivers · VSSOP-10-0.5mm
LM5106MMX from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive gate drive supply, decoupled to VSS with low ESR/ESL capacitor. |
| 2 | HB | power_in | High-side bootstrap supply, voltage range HS + 8 to HS + 14 V. |
| 3 | HO | output | High-side gate driver output, voltage range HS - 0.3 to HB + 0.3 V, drives high-side N-MOS gate. |
| 4 | HS | input | High-side MOSFET source, voltage range -1 to 100 V relative to VSS. |
| 5 | NC | unconnected | Not connected. |
| 6 | RDT | input | Dead-time programming input, resistor to VSS programs turnon delay, voltage range -0.3 to 5 V. |
| 7 | EN | input | Logic input for driver enable/disable, TTL compatible with hysteresis, disables LO and HO when low. |
| 8 | IN | input | Logic input for gate driver control, TTL compatible with hysteresis, high turns on high-side and off low-side. |
| 9 | VSS | power_in | Ground return, all signals referenced to VSS. |
| 10 | LO | output | Low-side gate driver output, voltage range -0.3 to VDD + 0.3 V, drives low-side N-MOS gate. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Motor Driver ICs |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
LM5106MMX - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
lm5106mmx-etched.step/lm5106mmx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm5106mmx.step/lm5106mmx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
1e623b370d6f5134, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).