3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM5102SDX
Texas Instruments · Gate Drive ICs · WSON-10-EP(4x4)
LM5102SDX from Texas Instruments, in a WSON-10-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive gate drive supply, which should be locally decoupled to VSS with a low ESR/ESL capacitor placed as close to the IC as possible; the recommended VDD range is 9 V to 14 V and the absolute maximum is 18 V. |
| 2 | HB | power_in | High-side gate driver bootstrap rail; the positive terminal of the bootstrap capacitor connects here, placed as close to the IC as possible, and VHB to VHS must not exceed 18 V absolute maximum. |
| 3 | HO | output | High-side gate driver output, connected to the gate of the high-side MOSFET through a short low-inductance path; HO is limited to VHS - 0.3 V to VHB + 0.3 V. |
| 4 | HS | power_in | High-side MOSFET source connection and negative terminal of the bootstrap capacitor; VHS to VSS is rated from -1 V to 100 V. |
| 5 | RT1 | passive | Resistor from RT1 to ground programs the rising edge delay of the high-side output, and RT1 to VSS is limited to -0.3 V to 5 V. |
| 6 | RT2 | passive | Resistor from RT2 to ground programs the rising edge delay of the low-side output, and RT2 to VSS is limited to -0.3 V to 5 V. |
| 7 | HI | input | High-side driver control input with TTL compatible thresholds; unused inputs must be tied to ground and not left open. |
| 8 | LI | input | Low-side driver control input with TTL compatible thresholds; unused inputs must be tied to ground and not left open. |
| 9 | VSS | power_in | Ground return; all signals are referenced to this ground. |
| 10 | LO | output | Low-side gate driver output, connected to the gate of the low-side MOSFET through a short low-inductance path; LO is limited to -0.3 V to VDD + 0.3 V. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-10-EP(4x4) |
| Category | Power Supply Chip |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
LM5102SDX - Footprint:
Package_SON:WSON-10-1EP_4x4mm_P0.8mm_EP2.6x3mm - 3D model: WSON-10-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
lm5102sdx-etched.step/lm5102sdx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm5102sdx.step/lm5102sdx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
6d701ba09d50ea77, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).