main
Ray
Publish 0.1.0
8624dcc
LM50QIM3X
Texas Instruments · Temperature Sensors · SOT-23
LM50QIM3X from Texas Instruments, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +VS | power_in | Positive supply pin; 4.5V to 10V for LM50-Q1 (absolute maximum 12V). |
| 2 | VO | output | Analog output of the temperature sensor, 10mV/°C with 500mV offset at 0°C and 2kΩ typical (4kΩ max) output impedance. |
| 3 | GND | power_in | Device ground, connected to the negative terminal of the power supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23 |
| Category | Sensors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Temperature accuracy at 25°C | TACY | -3 | 3 | °C | TA = 25°C | 6 | |
| Temperature accuracy at 125°C | TACY | -4 | 4 | °C | TA = TMAX = 125°C | 6 | |
| Temperature accuracy at -40°C | TACY | -4 | 4 | °C | TA = TMIN = -40°C | 6 | |
| Output offset voltage at 0°C | V0°C | 500 | mV | 6 | |||
| Temperature coefficient (sensor gain) | TC | 9.7 | 10 | 10.3 | mV/°C | TA = TJ = TMIN to TMAX | 6 |
| Output nonlinearity | VONL | -0.8 | 0.8 | °C | TA = TJ = TMIN to TMAX | 6 | |
| Output impedance | ZOUT | 2000 | 4000 | Ω | TA = TJ = TMIN to TMAX | 6 | |
| Turn-on time (legacy chip) | TON | 5 | µs | LM50-Q1 (legacy chip) | 6 | ||
| Turn-on time (new chip) | TON | 30 | µs | LM50-Q1 (new chip) | 6 | ||
| Long-term stability and drift | TLTD | 0.08 | °C | TJ = 125°C, 1000 hours | 6 | ||
| Operating current (legacy chip) | IDD | 95 | 180 | µA | TA = TMIN to TMAX, 4.5V ≤ +VS ≤ 10V, legacy chip | 6 | |
| Operating current (new chip) | IDD | 52 | 90 | µA | TA = TMIN to TMAX, 4.5V ≤ +VS ≤ 10V, new chip | 6 | |
| Line regulation | PSR | -1.2 | 1.2 | mV/V | TA = TMIN to TMAX, 4.5V ≤ +VS ≤ 10V | 6 | |
| Quiescent current change (legacy chip) | ΔIDD | 2 | µA | TA = TMIN to TMAX, 4.5V ≤ +VS ≤ 10V, legacy chip | 6 | ||
| Quiescent current change (new chip) | ΔIDD | 8 | µA | TA = TMIN to TMAX, 4.5V ≤ +VS ≤ 10V, new chip | 6 | ||
| Quiescent current temperature coefficient | IDD_TEMP | 2 | µA/°C | TA = TMIN to TMAX, 4.5V ≤ +VS ≤ 10V | 6 | ||
| Supply voltage | +VS | -0.2 | 12 | V | LM50-Q1 | 5 | |
| Output voltage | VO | -1 | V | LM50-Q1; max is +VS + 0.6, not to exceed 12V | 5 | ||
| Output current | IOUT | 10 | mA | 5 | |||
| Maximum junction temperature | TJ | 150 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | LM50-Q1 | 5 | |
| ESD HBM | V(ESD) | -2000 | 2000 | V | LM50-Q1, HBM per AEC Q100-002 | 5 | |
| ESD CDM | V(ESD) | -750 | 750 | V | LM50-Q1, CDM per AEC Q100-011 | 5 | |
| Supply voltage | +VS | 4.5 | 10 | V | LM50-Q1 | 5 | |
| Rated temperature | TMIN, TMAX | -40 | 125 | °C | LM50-Q1 | 5 | |
| Junction-to-ambient thermal resistance (legacy chip) | RθJA | 291.9 | °C/W | DBZ (SOT-23), 3 pins, legacy chip | 5 | ||
| Junction-to-ambient thermal resistance (new chip) | RθJA | 240.6 | °C/W | DBZ (SOT-23), 3 pins, new chip | 5 | ||
| Junction-to-case (top) thermal resistance (legacy chip) | RθJC(top) | 114.3 | °C/W | legacy chip | 5 | ||
| Junction-to-case (top) thermal resistance (new chip) | RθJC(top) | 144.5 | °C/W | new chip | 5 | ||
| Junction-to-board thermal resistance (legacy chip) | RθJB | 62.3 | °C/W | legacy chip | 5 | ||
| Junction-to-board thermal resistance (new chip) | RθJB | 72.3 | °C/W | new chip | 5 | ||
| Junction-to-top characterization parameter (legacy chip) | ψJT | 7.4 | °C/W | legacy chip | 5 | ||
| Junction-to-top characterization parameter (new chip) | ψJT | 28.7 | °C/W | new chip | 5 | ||
| Junction-to-board characterization parameter (legacy chip) | ψJB | 61 | °C/W | legacy chip | 5 | ||
| Junction-to-board characterization parameter (new chip) | ψJB | 71.7 | °C/W | new chip | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LM50QIM3X - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.92 mm, terminals on the pads, 1.12 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lm50qim3x-etched.step/lm50qim3x-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm50qim3x.step/lm50qim3x.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
0206733bdb903081, retrieved 2026-11-13, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# LM50QIM3X
**Texas Instruments** · Temperature Sensors · SOT-23
LM50QIM3X from Texas Instruments, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +VS | power_in | Positive supply pin; 4.5V to 10V for LM50-Q1 (absolute maximum 12V). |
| 2 | VO | output | Analog output of the temperature sensor, 10mV/°C with 500mV offset at 0°C and 2kΩ typical (4kΩ max) output impedance. |
| 3 | GND | power_in | Device ground, connected to the negative terminal of the power supply. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23 |
| Category | Sensors |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Temperature accuracy at 25°C | TACY | -3 | | 3 | °C | TA = 25°C | 6 |
| Temperature accuracy at 125°C | TACY | -4 | | 4 | °C | TA = TMAX = 125°C | 6 |
| Temperature accuracy at -40°C | TACY | -4 | | 4 | °C | TA = TMIN = -40°C | 6 |
| Output offset voltage at 0°C | V0°C | | 500 | | mV | | 6 |
| Temperature coefficient (sensor gain) | TC | 9.7 | 10 | 10.3 | mV/°C | TA = TJ = TMIN to TMAX | 6 |
| Output nonlinearity | VONL | -0.8 | | 0.8 | °C | TA = TJ = TMIN to TMAX | 6 |
| Output impedance | ZOUT | | 2000 | 4000 | Ω | TA = TJ = TMIN to TMAX | 6 |
| Turn-on time (legacy chip) | TON | | 5 | | µs | LM50-Q1 (legacy chip) | 6 |
| Turn-on time (new chip) | TON | | 30 | | µs | LM50-Q1 (new chip) | 6 |
| Long-term stability and drift | TLTD | | 0.08 | | °C | TJ = 125°C, 1000 hours | 6 |
| Operating current (legacy chip) | IDD | | 95 | 180 | µA | TA = TMIN to TMAX, 4.5V ≤ +VS ≤ 10V, legacy chip | 6 |
| Operating current (new chip) | IDD | | 52 | 90 | µA | TA = TMIN to TMAX, 4.5V ≤ +VS ≤ 10V, new chip | 6 |
| Line regulation | PSR | -1.2 | | 1.2 | mV/V | TA = TMIN to TMAX, 4.5V ≤ +VS ≤ 10V | 6 |
| Quiescent current change (legacy chip) | ΔIDD | | 2 | | µA | TA = TMIN to TMAX, 4.5V ≤ +VS ≤ 10V, legacy chip | 6 |
| Quiescent current change (new chip) | ΔIDD | | 8 | | µA | TA = TMIN to TMAX, 4.5V ≤ +VS ≤ 10V, new chip | 6 |
| Quiescent current temperature coefficient | IDD_TEMP | | 2 | | µA/°C | TA = TMIN to TMAX, 4.5V ≤ +VS ≤ 10V | 6 |
| Supply voltage | +VS | -0.2 | | 12 | V | LM50-Q1 | 5 |
| Output voltage | VO | -1 | | | V | LM50-Q1; max is +VS + 0.6, not to exceed 12V | 5 |
| Output current | IOUT | | | 10 | mA | | 5 |
| Maximum junction temperature | TJ | | | 150 | °C | | 5 |
| Storage temperature | Tstg | -65 | | 150 | °C | LM50-Q1 | 5 |
| ESD HBM | V(ESD) | -2000 | | 2000 | V | LM50-Q1, HBM per AEC Q100-002 | 5 |
| ESD CDM | V(ESD) | -750 | | 750 | V | LM50-Q1, CDM per AEC Q100-011 | 5 |
| Supply voltage | +VS | 4.5 | | 10 | V | LM50-Q1 | 5 |
| Rated temperature | TMIN, TMAX | -40 | | 125 | °C | LM50-Q1 | 5 |
| Junction-to-ambient thermal resistance (legacy chip) | RθJA | | 291.9 | | °C/W | DBZ (SOT-23), 3 pins, legacy chip | 5 |
| Junction-to-ambient thermal resistance (new chip) | RθJA | | 240.6 | | °C/W | DBZ (SOT-23), 3 pins, new chip | 5 |
| Junction-to-case (top) thermal resistance (legacy chip) | RθJC(top) | | 114.3 | | °C/W | legacy chip | 5 |
| Junction-to-case (top) thermal resistance (new chip) | RθJC(top) | | 144.5 | | °C/W | new chip | 5 |
| Junction-to-board thermal resistance (legacy chip) | RθJB | | 62.3 | | °C/W | legacy chip | 5 |
| Junction-to-board thermal resistance (new chip) | RθJB | | 72.3 | | °C/W | new chip | 5 |
| Junction-to-top characterization parameter (legacy chip) | ψJT | | 7.4 | | °C/W | legacy chip | 5 |
| Junction-to-top characterization parameter (new chip) | ψJT | | 28.7 | | °C/W | new chip | 5 |
| Junction-to-board characterization parameter (legacy chip) | ψJB | | 61 | | °C/W | legacy chip | 5 |
| Junction-to-board characterization parameter (new chip) | ψJB | | 71.7 | | °C/W | new chip | 5 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `LM50QIM3X`
- Footprint: `Package_TO_SOT_SMD:SOT-23`
- 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.92 mm, terminals on the pads, 1.12 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `lm50qim3x-etched.step` / `lm50qim3x-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm50qim3x.step` / `lm50qim3x.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm50-q1) (34 pp, sha256 `0206733bdb903081`, retrieved 2026-11-13, tier: manufacturer)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/lm50qim3x-datasheet.pdf)