main
Ray Publish 0.1.0 beaf6f7
{
  "slug": "lm5088qmh-1",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Controllers, HTSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "lm5088qmh-1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm5088qmh-1.kicad_sym",
    "lm5088qmh-1.kicad_mod",
    "lm5088qmh-1.glb",
    "lm5088qmh-1.step",
    "lm5088qmh-1.lbr",
    "docs/hero.png",
    "docs/lm5088qmh-1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm5088qmh-1-hero.glb",
    "lm5088qmh-1-hero.overlay.json",
    "lm5088qmh-1-etched.glb"
  ],
  "component": {
    "mpn": "LM5088QMH-1",
    "manufacturer": "Texas Instruments",
    "package": "HTSSOP-16-EP",
    "pin_count": 17,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Controllers",
    "datasheet": "https://www.ti.com/lit/ds/symlink/lm5088.pdf",
    "parts": {
      "symbol": "lm5088qmh-1.kicad_sym",
      "footprint": "lm5088qmh-1.kicad_mod",
      "model_3d": "lm5088qmh-1-hero.glb",
      "model_3d_plain": "lm5088qmh-1-etched.glb",
      "model_3d_step": "lm5088qmh-1-etched.step",
      "model_3d_step_plain": "lm5088qmh-1.step",
      "lbr": "lm5088qmh-1.lbr"
    },
    "distributor_links": {
      "lcsc": "C1529956",
      "mouser": "926-LM5088QMH-1/NOPB"
    },
    "distributor_check": {
      "checked_at": "2026-11-10T08:39:02Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 975 calls left today"
      },
      "mouser": {
        "pn": "926-LM5088QMH-1/NOPB",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage for the IC, with an operating range of 4.5 V to 75 V and a 76 V absolute maximum on VIN to GND."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Enable input: below 0.4 V the regulator is in low-power shutdown, 0.4 V to 1.2 V selects standby, and above 1.2 V the controller is operational; the pin may not exceed 14 V."
      },
      {
        "number": "3",
        "name": "SS",
        "type": "passive",
        "description": "Soft-start pin charged by an internal 11-µA source into an external capacitor; it is held low in standby, VCC UVLO and thermal shutdown, and can track an external voltage below 1.2 V."
      },
      {
        "number": "4",
        "name": "RAMP",
        "type": "output",
        "description": "An external capacitor from RAMP to GND, recommended 100 pF to 2000 pF, sets the emulated current-mode ramp slope."
      },
      {
        "number": "5",
        "name": "RT/SYNC",
        "type": "input",
        "description": "Oscillator frequency-set pin with a single resistor to GND (recommended 50 kHz to 1 MHz); it also accepts an AC-coupled sync pulse above the programmed frequency, and the RT resistor is still required when syncing."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground return for the controller."
      },
      {
        "number": "7",
        "name": "COMP",
        "type": "output",
        "description": "Output of the internal error amplifier; the loop compensation network connects between COMP and FB."
      },
      {
        "number": "8",
        "name": "FB",
        "type": "input",
        "description": "Feedback input to the inverting input of the error amplifier, with a regulation threshold of 1.205 V."
      },
      {
        "number": "9",
        "name": "OUT",
        "type": "input",
        "description": "Output voltage connection, to be connected directly to the regulated output voltage."
      },
      {
        "number": "10",
        "name": "DITH",
        "type": "passive",
        "description": "Frequency dithering pin (LM5088-1 only): a capacitor to GND is charged and discharged by 27-µA sources to modulate the oscillator between -5% and +5% of nominal, and grounding the pin disables dithering."
      },
      {
        "number": "11",
        "name": "CSG",
        "type": "passive",
        "description": "Current sense ground, the low-side reference for the current sense resistor, which must be Kelvin connected."
      },
      {
        "number": "12",
        "name": "CS",
        "type": "input",
        "description": "Current sense input that measures the re-circulating diode current through the sense resistor to provide the DC offset of the emulated ramp."
      },
      {
        "number": "13",
        "name": "SW",
        "type": "passive",
        "description": "Switching node, connected to the source terminal of the external buck MOSFET."
      },
      {
        "number": "14",
        "name": "HG",
        "type": "output",
        "description": "High-side gate drive output, connected to the gate of the external N-channel MOSFET."
      },
      {
        "number": "15",
        "name": "BOOT",
        "type": "passive",
        "description": "Bootstrap input; the bootstrap capacitor between BOOT and SW is charged from VCC through an internal diode during the buck off-time."
      },
      {
        "number": "16",
        "name": "VCC",
        "type": "power_out",
        "description": "Bias regulator output that tracks VIN up to 7.8 V typical, requires a 0.1-µF to 10-µF ceramic decoupling capacitor, and may be overdriven by an external 8.3 V to 13 V supply."
      },
      {
        "number": "17",
        "name": "EP",
        "type": "passive",
        "description": "Exposed thermal pad, electrically isolated from the leads, which must be soldered to the ground plane to reduce thermal resistance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet gives two pin-10 variants: LM5088-1 (dithering, pin 10 = DITH, Figure 5-1) and LM5088-; The pinout table does not assign a type, so KiCad ERC types were chosen from the function descriptio; The datasheet does not state a pin type for the EP pad or whether it should be tied to GND. It only "
        ],
        "pages_sent": 45,
        "cost_usd": 0.1792,
        "at": "2026-11-10T08:38:48"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/lm5088.pdf",
        "pages": 45,
        "sha256": "471a76480f35dc1d",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm5088qmh-1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7982746831c0bd23f4690608869ad67776faae5c762fb0376666126a3998921b",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm5088qmh-1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4dfb06a3ad471b1319fc46c7fb7821a6d3f3044dcec2ea06fa28e70cc8f78802",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "PWP",
      "source_page": 42,
      "D": {
        "nom_mm": 5.0,
        "range_mm": [
          4.9,
          5.1
        ]
      },
      "E1": {
        "nom_mm": 4.4,
        "range_mm": [
          4.3,
          4.5
        ]
      },
      "E": {
        "nom_mm": 6.4,
        "range_mm": [
          6.2,
          6.6
        ]
      },
      "e": {
        "nom_mm": 0.65,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.2,
        "range_mm": [
          null,
          1.2
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "lm5088qmh-1.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}