LM5088MH-2

{
  "slug": "lm5088mh-2",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Controllers, HTSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "lm5088mh-2",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm5088mh-2.kicad_sym",
    "lm5088mh-2.kicad_mod",
    "lm5088mh-2.glb",
    "lm5088mh-2.step",
    "lm5088mh-2.lbr",
    "docs/hero.png",
    "docs/lm5088mh-2-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm5088mh-2-hero.glb",
    "lm5088mh-2-hero.overlay.json"
  ],
  "component": {
    "mpn": "LM5088MH-2",
    "manufacturer": "Texas Instruments",
    "package": "HTSSOP-16-EP",
    "pin_count": 17,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Controllers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lm5088",
    "parts": {
      "symbol": "lm5088mh-2.kicad_sym",
      "footprint": "lm5088mh-2.kicad_mod",
      "model_3d": "lm5088mh-2-hero.glb",
      "model_3d_plain": "lm5088mh-2.glb",
      "model_3d_step": "lm5088mh-2-etched.step",
      "model_3d_step_plain": "lm5088mh-2.step",
      "lbr": "lm5088mh-2.lbr"
    },
    "distributor_links": {
      "lcsc": "C1529950"
    },
    "distributor_check": {
      "checked_at": "2026-10-10T23:28:03Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "IC supply voltage with an operating range of 4.5 V to 75 V."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Enable input: below 0.4 V the regulator is in a low-power state, 0.4 V to 1.2 V selects standby, and above 1.2 V the controller is operational, with a 5-µA pullup if left open."
      },
      {
        "number": "3",
        "name": "SS",
        "type": "passive",
        "description": "Soft-start pin charged by an internal 11-µA source through an external capacitor, controls the error amplifier when below the 1.2-V reference, and is held low in standby, VCC UV, and thermal shutdown."
      },
      {
        "number": "4",
        "name": "RAMP",
        "type": "passive",
        "description": "An external capacitor between RAMP and GND sets the emulated current-mode ramp slope, with a recommended range of 100 pF to 2000 pF."
      },
      {
        "number": "5",
        "name": "RT/SYNC",
        "type": "input",
        "description": "A single resistor to GND sets the oscillator frequency over a recommended 50 kHz to 1 MHz range, and an external higher-frequency sync signal can be coupled through a small capacitor, with the RT resistor still required."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground return for the controller."
      },
      {
        "number": "7",
        "name": "COMP",
        "type": "output",
        "description": "Output of the internal error amplifier, where the loop compensation network must be connected between this pin and FB."
      },
      {
        "number": "8",
        "name": "FB",
        "type": "input",
        "description": "Inverting input of the internal error amplifier with a regulation threshold of 1.205 V."
      },
      {
        "number": "9",
        "name": "OUT",
        "type": "input",
        "description": "Output voltage connection that must be connected directly to the regulated output voltage."
      },
      {
        "number": "10",
        "name": "RES",
        "type": "passive",
        "description": "Hiccup-mode restart timing capacitor pin (LM5088-2 only) that is charged by 50 µA during over-current events, disables HG when it reaches 1.2 V, and resumes operation when it falls below 0.2 V."
      },
      {
        "number": "11",
        "name": "CSG",
        "type": "power_in",
        "description": "Current-sense ground serving as the low-side reference for the current sense resistor."
      },
      {
        "number": "12",
        "name": "CS",
        "type": "input",
        "description": "Current measurement connection for the re-circulating diode current, sensed through an external sense resistor and internal sample-and-hold at the end of the buck switch off time to provide the emulated ramp DC offset."
      },
      {
        "number": "13",
        "name": "SW",
        "type": "passive",
        "description": "Switching node that connects to the source terminal of the external MOSFET switch."
      },
      {
        "number": "14",
        "name": "HG",
        "type": "output",
        "description": "High-side gate drive output that connects to the gate terminal of the external MOSFET switch."
      },
      {
        "number": "15",
        "name": "BOOT",
        "type": "passive",
        "description": "Bootstrap capacitor input, with an external capacitor required between BOOT and SW to bias the gate driver, charged from VCC through an internal diode during the buck off-time."
      },
      {
        "number": "16",
        "name": "VCC",
        "type": "power_out",
        "description": "Bias regulator output that tracks VIN up to 7.8 V typical and requires a 0.1-µF to 10-µF ceramic decoupling capacitor, with an external 8.3 V to 13 V supply optionally applied to reduce internal dissipation."
      },
      {
        "number": "17",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad, electrically isolated, that must be soldered to the ground plane to reduce thermal resistance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 10 is DITH on the dither version (LM5088-1, Figure 5-1) and RES on the restart version (LM5088-2; The datasheet does not assign KiCad ERC classes; types for SS, RAMP, SW, BOOT and EP (passive) and R; OUT and CS are sense/feedback connections rather than standard logic inputs; I classed them as input"
        ],
        "pages_sent": 9,
        "cost_usd": 0.0649,
        "at": "2026-10-10T23:27:45"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lm5088",
        "pages": 45,
        "sha256": "8c5931b7d7c79ed7",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm5088mh-2.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7982746831c0bd23f4690608869ad67776faae5c762fb0376666126a3998921b",
        "checked": "2026-10-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm5088mh-2-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d15df6612e9dc79a7b627500ae6483db95fb3f59adf73d3ecbb5d21cd0d9157b",
        "checked": "2026-10-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}