component
LM5085SD
Public Made by Adomby adom
Texas Instruments DC-DC Converters, WSON-8-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+45@@ -0,0 +1,45 @@+# LM5085SD++**Texas Instruments** · DC-DC Converters · WSON-8-EP(3x3)++LM5085SD from Texas Instruments, in a WSON-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | ADJ | input | Current limit threshold adjustment input; set by external resistor from VIN to ADJ in conjunction with external sense resistor or PFET RDS(ON). |+| 2 | RT | input | On-time control and shutdown input; external resistor from VIN sets switching frequency; grounding pin shuts down controller. |+| 3 | FB | input | Voltage feedback input to regulation and over-voltage comparators with regulation threshold level of 1.25V. |+| 4 | GND | power_in | Circuit ground reference for all internal circuitry. |+| 5 | ISEN | input | Current sense input for limit detection; connect to PFET drain for RDS(ON) sensing or to PFET source with sense resistor for resistive current sensing. |+| 6 | PGATE | output | Gate driver output; voltage swing between VIN (Q1 off) and VCC (Q1 on); drives external PFET gate. |+| 7 | VCC | power_out | Gate driver bias regulator output; regulated at approximately 7.7V below VIN with maximum current capability of 20mA. |+| 8 | VIN | power_in | Input supply voltage with operating range from 4.5V to 75V; low ESR bypass capacitor must be located close to VIN and GND pins. |+| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WSON-8-EP(3x3) |+| Category | Power Management (PMIC) |+| Pins | 9 |++## CAD (KiCad official)++- Symbol: `LM5085SD`+- Footprint: `Package_SON:WSON-8-1EP_3x3mm_P0.5mm_EP1.6x2.0mm`+- 3D model: WSON-8-EP(3x3) (KiCad packages3D, STEP)+- 3D model files: `lm5085sd-etched.step` / `lm5085sd-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm5085sd.step` / `lm5085sd.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm5085-q1) (39 pp, sha256 `5a34a0aa7ad4c733`, retrieved 2026-10-07, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm5085sd-datasheet.pdf)
page.jsonadded+204@@ -0,0 +1,204 @@+{+ "slug": "lm5085sd",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, WSON-8-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "lm5085sd",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lm5085sd.kicad_sym",+ "lm5085sd.kicad_mod",+ "lm5085sd.glb",+ "lm5085sd.step",+ "lm5085sd.lbr",+ "docs/hero.png",+ "docs/lm5085sd-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "lm5085sd-hero.glb",+ "lm5085sd-hero.overlay.json"+ ],+ "component": {+ "mpn": "LM5085SD",+ "manufacturer": "Texas Instruments",+ "package": "WSON-8-EP(3x3)",+ "pin_count": 9,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lm5085-q1",+ "parts": {+ "symbol": "lm5085sd.kicad_sym",+ "footprint": "lm5085sd.kicad_mod",+ "model_3d": "lm5085sd-hero.glb",+ "model_3d_plain": "lm5085sd.glb",+ "model_3d_step": "lm5085sd-etched.step",+ "model_3d_step_plain": "lm5085sd.step",+ "lbr": "lm5085sd.lbr"+ },+ "distributor_links": {+ "lcsc": "C2650247"+ },+ "distributor_check": {+ "checked_at": "2026-10-07T03:04:14Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "ADJ",+ "type": "input",+ "description": "Current limit threshold adjustment input; set by external resistor from VIN to ADJ in conjunction with external sense resistor or PFET RDS(ON)."+ },+ {+ "number": "2",+ "name": "RT",+ "type": "input",+ "description": "On-time control and shutdown input; external resistor from VIN sets switching frequency; grounding pin shuts down controller."+ },+ {+ "number": "3",+ "name": "FB",+ "type": "input",+ "description": "Voltage feedback input to regulation and over-voltage comparators with regulation threshold level of 1.25V."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Circuit ground reference for all internal circuitry."+ },+ {+ "number": "5",+ "name": "ISEN",+ "type": "input",+ "description": "Current sense input for limit detection; connect to PFET drain for RDS(ON) sensing or to PFET source with sense resistor for resistive current sensing."+ },+ {+ "number": "6",+ "name": "PGATE",+ "type": "output",+ "description": "Gate driver output; voltage swing between VIN (Q1 off) and VCC (Q1 on); drives external PFET gate."+ },+ {+ "number": "7",+ "name": "VCC",+ "type": "power_out",+ "description": "Gate driver bias regulator output; regulated at approximately 7.7V below VIN with maximum current capability of 20mA."+ },+ {+ "number": "8",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply voltage with operating range from 4.5V to 75V; low ESR bypass capacitor must be located close to VIN and GND pins."+ },+ {+ "number": "9",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 9 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 12,+ "cost_usd": 0.1238,+ "at": "2026-10-07T03:03:57"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lm5085-q1",+ "pages": 39,+ "sha256": "5a34a0aa7ad4c733",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 9,+ "described": 9,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "lm5085sd.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3,+ 2.98,+ 0.82+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "cbee016fb8ee69c44b13d8818fcf65dcf240f5fdca70b22700521eb617c5311a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lm5085sd-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3,+ 2.98,+ 0.82+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "b7191a7c7d13523314efbada6a9c47db112add6a0f2afb6ca0a35d3f1a219671",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}