component
LM5085SD
Public Made by Adomby adom
Texas Instruments DC-DC Converters, WSON-8-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM5085SD
Texas Instruments · DC-DC Converters · WSON-8-EP(3x3)
LM5085SD from Texas Instruments, in a WSON-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ | input | Current limit threshold adjustment input; set by external resistor from VIN to ADJ in conjunction with external sense resistor or PFET RDS(ON). |
| 2 | RT | input | On-time control and shutdown input; external resistor from VIN sets switching frequency; grounding pin shuts down controller. |
| 3 | FB | input | Voltage feedback input to regulation and over-voltage comparators with regulation threshold level of 1.25V. |
| 4 | GND | power_in | Circuit ground reference for all internal circuitry. |
| 5 | ISEN | input | Current sense input for limit detection; connect to PFET drain for RDS(ON) sensing or to PFET source with sense resistor for resistive current sensing. |
| 6 | PGATE | output | Gate driver output; voltage swing between VIN (Q1 off) and VCC (Q1 on); drives external PFET gate. |
| 7 | VCC | power_out | Gate driver bias regulator output; regulated at approximately 7.7V below VIN with maximum current capability of 20mA. |
| 8 | VIN | power_in | Input supply voltage with operating range from 4.5V to 75V; low ESR bypass capacitor must be located close to VIN and GND pins. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-8-EP(3x3) |
| Category | Power Management (PMIC) |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
LM5085SD - Footprint:
Package_SON:WSON-8-1EP_3x3mm_P0.5mm_EP1.6x2.0mm - 3D model: WSON-8-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
lm5085sd-etched.step/lm5085sd-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm5085sd.step/lm5085sd.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (39 pp, sha256
5a34a0aa7ad4c733, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).