main
Ray
Publish 0.1.1
854fea1
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214
{
"slug": "lm5085qmyx",
"version": "0.1.1",
"type": "component",
"description": "Texas Instruments DC-DC Converters, MSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management (pmic)",
"lm5085qmyx",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lm5085qmyx.kicad_sym",
"lm5085qmyx.kicad_mod",
"lm5085qmyx.glb",
"lm5085qmyx.step",
"lm5085qmyx.lbr",
"docs/hero.png",
"docs/lm5085qmyx-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lm5085qmyx-etched.step",
"lm5085qmyx-hero.glb",
"lm5085qmyx-hero.overlay.json"
],
"component": {
"mpn": "LM5085QMYX",
"manufacturer": "Texas Instruments",
"package": "MSOP-8-EP",
"pin_count": 9,
"category": "Power Management (PMIC)",
"subcategory": "DC-DC Converters",
"datasheet": "https://www.ti.com/cn/lit/gpn/lm5085-q1",
"parts": {
"symbol": "lm5085qmyx.kicad_sym",
"footprint": "lm5085qmyx.kicad_mod",
"model_3d": "lm5085qmyx-hero.glb",
"model_3d_plain": "lm5085qmyx.glb",
"model_3d_step": "lm5085qmyx-etched.step",
"model_3d_step_plain": "lm5085qmyx.step",
"lbr": "lm5085qmyx.lbr"
},
"distributor_links": {
"lcsc": "C1848487"
},
"distributor_check": {
"checked_at": "2026-10-01T06:15:26Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "ADJ",
"type": "input",
"description": "Current Limit Adjust input; the current limit threshold is set by an external resistor from VIN to ADJ in conjunction with the external sense resistor or the PFET's RDS(ON)."
},
{
"number": "2",
"name": "RT",
"type": "input",
"description": "On-Time Control and Shutdown input; an external resistor from VIN to RT sets the buck switch on-time and switching frequency, or grounding this pin shuts down the controller."
},
{
"number": "3",
"name": "FB",
"type": "input",
"description": "Voltage Feedback input to the regulation and over-voltage comparators with regulation level of 1.25V."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Circuit Ground reference for all internal circuitry."
},
{
"number": "5",
"name": "ISEN",
"type": "input",
"description": "Current Sense Input for current limit detection; connect to the PFET drain when using RDS(ON) current sense or to the PFET source and sense resistor when using a current sense resistor."
},
{
"number": "6",
"name": "PGATE",
"type": "output",
"description": "Gate Driver Output that swings between VIN when Q1 is off and VCC when Q1 is on; connect to the gate of the external PFET."
},
{
"number": "7",
"name": "VCC",
"type": "power_out",
"description": "Output of the negative voltage regulator (relative to VIN) that biases the PFET gate driver; a low ESR capacitor is required from VIN to VCC located close to the pins."
},
{
"number": "8",
"name": "VIN",
"type": "power_in",
"description": "Input Supply Voltage with operating input range from 4.5V to 75V; a low ESR bypass capacitor must be located as close as possible to the VIN and GND pins."
},
{
"number": "9",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"exposed pad 9 added from the footprint",
"dropped thermal pad ['EP'] absent from footprint"
],
"pages_sent": 12,
"cost_usd": 0.144,
"at": "2026-10-01T06:15:12"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/lm5085-q1",
"pages": 39,
"sha256": "5a34a0aa7ad4c733",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 9,
"described": 9,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lm5085qmyx.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
3.0,
0.96
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "43252be3beac8fd30ca9bfeb82a613fa01d5dffff9b22810c13a4655daafb5ee",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lm5085qmyx-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
3.0,
0.96
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "3e67891e94771e616b658f2186fe49d02840208e5bd7868bda3d0336203d44bb",
"checked": "2026-11-17",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"title": "LM5085QMYX",
"brief": "Texas Instruments DC-DC Converters, MSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "MSOP-8-EP",
"Category": "Power Management (PMIC)",
"Pins": "9"
}
},
"discovery_triggers": [
"lm5085qmyx"
],
"discovery_pitch": "LM5085QMYX (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"visibility": "public"
}