3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLM5068MMX-2
Texas Instruments · Monitors & Reset Circuits · VSSOP-8
LM5068MMX-2 from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PWRGD | output | Open-drain power-good indicator that becomes active after a successful power-up sequence and is cancelled by input over-voltage or under-voltage faults; on the LM5068-2 the active power-good state is HIGH. |
| 2 | OV | input | Line over-voltage shutdown input set by an external resistor divider, with hysteresis from a 20 µA internal current source sourced into the divider when OV exceeds 2.5 V. |
| 3 | UV | input | Line under-voltage shutdown input set by an external resistor divider, with hysteresis from a 20 µA internal current source sunk from the divider when UV falls below 2.5 V. |
| 4 | VEE | power_in | Negative supply voltage input; the datasheet specifies an operating VDD − VEE supply range of 10 V to 90 V. |
| 5 | SENSE | input | Current sense input across external sense resistor Rs, where a sense voltage above 50 mV starts the fault timer, load current is limited to 100 mV/Rs, and a sense voltage above 200 mV triggers fast gate pull-down (SENSE to VEE absolute maximum is 8 V). |
| 6 | GATE | output | N-channel MOSFET gate drive output that is pulled high by a 60 µA current source to turn on the external MOSFET. |
| 7 | TIMER | input | Timer input with an external capacitor that sets the start-up delay and the over-current shutdown delay, and also sets the auto-re-try timing on the -2 and -4 versions; the datasheet gives an ESD rating of 1.5 kV for this pin. |
| 8 | VDD | power_in | Positive supply voltage input; VDD to VEE is rated 100 V absolute maximum with an operating range of 10 V to 90 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Power Management ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Current | IIN | 0.82 | 1.3 | mA | 4 | ||
| Shutdown Current | ISD | 580 | 1000 | µA | UV/OV = 0V | 4 | |
| Operating Supply Range | VDD − VEE | 10 | 90 | V | 4 | ||
| Under-voltage Comparator Threshold | VUV | 2.45 | 2.5 | 2.55 | V | 4 | |
| Under-voltage Hysteresis Current Source | IUVHCS | 18 | 20 | 22 | µA | 4 | |
| Over-voltage Comparator Threshold | VOV | 2.45 | 2.5 | 2.55 | V | 4 | |
| Over-voltage Hysteresis Current Sink | IOVHCS | 18 | 20 | 22 | µA | 4 | |
| Circuit Breaker Current Limit Voltage | VCB | 40 | 50 | 60 | mV | 4 | |
| Analog Current Limit Voltage | VAC | 80 | 100 | 120 | mV | 4 | |
| Fast Discharge Current Limit Voltage (Fast Gate Pull Down Threshold) | VFDC | 150 | 200 | 250 | mV | 4 | |
| Sense Input Current | ISENSE | -30 | -15 | µA | VSENSE = 50mV | 4 | |
| Timer On (Initial Cycle, Sourcing) | ITIMER | 4 | 6 | 8 | µA | VTIMER = 2V | 5 |
| Timer On (Circuit Breaker, Sourcing) | 200 | 240 | 280 | µA | VTIMER = 2V | 5 | |
| Timer Off (Cooling Cycle, Sinking) | 4 | 6 | 8 | µA | VTIMER = 2V | 5 | |
| Saturation Gate Drive Voltage | VG | 9 | 10.6 | 12 | V | VDD- VEE = 48V | 5 |
| Gate Pin Current (Sourcing) | IGATE | 40 | 60 | 80 | µA | VSENSE = 0V | 5 |
| PWRGD Low Voltage | VPGLV | 0.2 | 0.6 | V | ISINK = 1mA | 5 | |
| PWRGD High Leakage Current | IPGLC | 1 | µA | VPWRGD = 90V | 5 | ||
| VDD (VDD to VEE) | VDD | 100 | V | 4 | |||
| PWRGD (PWRGD to VEE) | PWRGD | 100 | V | 4 | |||
| SENSE (SENSE to VEE) | SENSE | 8 | V | 4 | |||
| UV/OV (Clamped) (UV/OV to VEE) | UV/OV | 8 | V | 4 | |||
| All Other Inputs to VEE | 16 | V | 4 | ||||
| Junction Temperature | TJ | 150 | °C | 4 | |||
| Storage Temperature | TS | -55 | 150 | °C | 4 | ||
| ESD Rating | 2 | kV | 4 | ||||
| Supply Voltage Range (VDD) | VDD | 10 | 90 | V | 4 | ||
| Junction Temp. Range | TJ | -40 | 105 | °C | 4 | ||
| VDD Under-voltage Shutdown | VUVS | 8.5 | V | 4 | |||
| VDD Under-voltage Shutdown Hysteresis | VUVSH | 0.6 | V | 4 | |||
| UV Comparator Delay | tUVCD | 1100 | ns | UV Low to Gate Low | 4 | ||
| OV Comparator Delay | tOVCD | 500 | ns | OV High to Gate Low | 4 | ||
| Timer High Voltage Threshold | VTHVT | 4 | V | 5 | |||
| Timer Low Voltage Threshold | VTLVT | 1 | V | 5 | |||
| Timer Off (Initial Cycle, Sinking) | 27 | mA | VTIMER = 2V | 5 | |||
| Gate Pin Current (Sinking) | 2.7 | mA | VSENSE = 150mV; VGATE = 3V | 5 | |||
| Gate Pin Current (Sinking) | 300 | mA | VSENSE = 300mV; VGATE = 1V | 5 | |||
| Saturation Gate Drive Voltage | VG | 7.8 | V | VDD- VEE = 10V | 5 | ||
| Gate Low Threshold | VGLT | 0.5 | V | Before Gate ramp-up | 5 | ||
| Gate Voltage at onset of PWRGD | VPGV | 8 | V | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LM5068MMX-2 - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lm5068mmx-2-etched.step/lm5068mmx-2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm5068mmx-2.step/lm5068mmx-2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
5462e7021484b800, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).