main
Ray lm5032mtcx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 9247e05
{
  "slug": "lm5032mtcx",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "lm5032mtcx",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm5032mtcx.kicad_sym",
    "lm5032mtcx.kicad_mod",
    "lm5032mtcx.glb",
    "lm5032mtcx.step",
    "lm5032mtcx.lbr",
    "docs/hero.png",
    "docs/lm5032mtcx-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "LM5032MTCX",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-16",
    "pin_count": 16,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lm5032",
    "parts": {
      "symbol": "lm5032mtcx.kicad_sym",
      "footprint": "lm5032mtcx.kicad_mod",
      "model_3d": "lm5032mtcx-etched.glb",
      "model_3d_plain": "lm5032mtcx.glb",
      "model_3d_step": "lm5032mtcx-etched.step",
      "model_3d_step_plain": "lm5032mtcx.step",
      "lbr": "lm5032mtcx.lbr"
    },
    "distributor_links": {
      "lcsc": "C527408"
    },
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply to the startup regulator with operating input range of 13V to 100V and transient capability to 105V."
      },
      {
        "number": "2",
        "name": "COMP1",
        "type": "input",
        "description": "PWM control input for Controller 1 providing voltage feedback to PWM comparator through 3:1 divider with internal 5-kΩ pull-up resistor to 5.0V for opto-coupler bias."
      },
      {
        "number": "3",
        "name": "CS1",
        "type": "input",
        "description": "Current sense input for Controller 1 for current mode control and cycle-by-cycle current limiting with 0.5V threshold, maximum voltage 1.25V."
      },
      {
        "number": "4",
        "name": "SS1",
        "type": "input",
        "description": "Soft-start input for Controller 1 with internal 50-µA charging current source, reduced to 1-µA during current limit restart, shutdown when forced below 0.5V."
      },
      {
        "number": "5",
        "name": "UVLO",
        "type": "input",
        "description": "VIN under-voltage lockout input with 1.25V comparator reference, switched 20-µA current source for hysteresis, and controls maximum duty cycle."
      },
      {
        "number": "6",
        "name": "VCC",
        "type": "power_out",
        "description": "Startup regulator output providing 7.7V regulated supply with current limit minimum of 19mA."
      },
      {
        "number": "7",
        "name": "OUT1",
        "type": "output",
        "description": "Main gate driver output for Controller 1 switching between VCC and GND1 at frequency equal to half oscillator frequency."
      },
      {
        "number": "8",
        "name": "GND1",
        "type": "power_in",
        "description": "Ground connection for Controller 1 including gate driver, PWM controller, soft-start and support functions."
      },
      {
        "number": "9",
        "name": "GND2",
        "type": "power_in",
        "description": "Ground connection for Controller 2 including gate driver, PWM controller and soft-start."
      },
      {
        "number": "10",
        "name": "OUT2",
        "type": "output",
        "description": "Main gate driver output for Controller 2 switching between VCC and GND2 at frequency equal to half oscillator frequency."
      },
      {
        "number": "11",
        "name": "RES",
        "type": "input",
        "description": "Hiccup mode restart adjust input with external capacitor setting time delay before forced restart during sustained current limiting, threshold at 2.55V."
      },
      {
        "number": "12",
        "name": "SS2",
        "type": "input",
        "description": "Soft-start input for Controller 2 with internal 50-µA charging current source, reduced to 1-µA during current limit restart, shutdown when forced below 0.5V."
      },
      {
        "number": "13",
        "name": "CS2",
        "type": "input",
        "description": "Current sense input for Controller 2 for current mode control and cycle-by-cycle current limiting with 0.5V threshold, maximum voltage 1.25V."
      },
      {
        "number": "14",
        "name": "COMP2",
        "type": "input",
        "description": "PWM control input for Controller 2 providing voltage feedback to PWM comparator through 3:1 divider with internal 5-kΩ pull-up resistor to 5.0V for opto-coupler bias."
      },
      {
        "number": "15",
        "name": "DCL",
        "type": "input",
        "description": "Duty cycle limit input with external resistor setting maximum allowed duty cycle at OUT1 and OUT2."
      },
      {
        "number": "16",
        "name": "RT/SYNC",
        "type": "input",
        "description": "Oscillator frequency adjustment and synchronization input with external resistor setting oscillator frequency and accepting ac-coupled external synchronization pulses."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 36,
        "cost_usd": 0.3642,
        "at": "2026-09-24T11:00:13"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lm5032",
        "pages": 36,
        "sha256": "7d2e1777413cf7ed",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm5032mtcx.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm5032mtcx-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "72f4dbc801014e08348f15fdd9ddaac58bf53e28c0ba944429fc685b7edb92a4",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}