main
Ray lm5026mtx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) b0a8866
{
  "schema_version": 1,
  "type": "component",
  "slug": "lm5026mtx",
  "title": "LM5026MTX",
  "brief": "Texas Instruments AC-DC Controllers And Regulators, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "lm5026mtx",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "LM5026MTX",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-16",
    "pin_count": 16,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lm5026",
    "parts": {
      "symbol": "lm5026mtx.kicad_sym",
      "footprint": "lm5026mtx.kicad_mod",
      "model_3d": "lm5026mtx-etched.glb",
      "model_3d_plain": "lm5026mtx.glb",
      "model_3d_step": "lm5026mtx-etched.step",
      "model_3d_step_plain": "lm5026mtx.step",
      "lbr": "lm5026mtx.lbr"
    },
    "distributor_links": {
      "lcsc": "C118021"
    },
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "Input voltage source to the start-up regulator with operating input range of 13 V to 100 V and transient capability to 105 V."
      },
      {
        "number": "2",
        "name": "UVLO",
        "type": "input",
        "description": "Line undervoltage lockout controlled by external voltage divider; enables VCC and REF regulators at 0.4-V threshold and enables SS pin and active mode at 1.25-V threshold."
      },
      {
        "number": "3",
        "name": "CS",
        "type": "input",
        "description": "Current sense input for current mode control; exceeding 0.5 V terminates output pulse for cycle-by-cycle current limit; internal switch holds CS low for 100 ns after OUT_A switches high."
      },
      {
        "number": "4",
        "name": "RES",
        "type": "input",
        "description": "Restart timer input with external capacitor; 10-µA current source charges capacitor during cycle-by-cycle current limit; 2.5-V threshold triggers soft-start reset and discharge at 1 µA reverting to 50 µA after first pulse."
      },
      {
        "number": "5",
        "name": "TIME",
        "type": "input",
        "description": "Gate drive overlap or deadtime control; external RSET resistor to AGND produces in-phase OUT_A and OUT_B pulses with overlap; connection to REF produces out-of-phase pulses with deadtime."
      },
      {
        "number": "6",
        "name": "REF",
        "type": "output",
        "description": "5-V precision reference output with maximum output current of 10 mA; requires local 0.1-µF decoupling capacitor."
      },
      {
        "number": "7",
        "name": "VCC",
        "type": "power_in",
        "description": "High voltage start-up regulator output regulated to 7.6 V; supplies power to internal circuitry; auxiliary winding above regulation setpoint disables internal start-up regulator."
      },
      {
        "number": "8",
        "name": "OUT_A",
        "type": "output",
        "description": "Main switch PWM gate driver output with 3-A peak sink current capability and compound MOS-Bipolar configuration for superior gate drive characteristics."
      },
      {
        "number": "9",
        "name": "OUT_B",
        "type": "output",
        "description": "Active clamp switch gate driver output with 0.5-A peak source and sink current capability; can drive P-Channel or N-Channel clamp switches."
      },
      {
        "number": "10",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground connection; must connect directly to analog ground with short direct connection to AGND to avoid jitter."
      },
      {
        "number": "11",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog return ground connection; must connect directly to power ground with short direct connection to PGND to avoid jitter."
      },
      {
        "number": "12",
        "name": "SS",
        "type": "input",
        "description": "Soft-start control pin; external capacitor with internal 50-µA current source sets soft-start ramp; current reduced to 1 µA following restart; soft-stop discharge current is 50 µA."
      },
      {
        "number": "13",
        "name": "COMP",
        "type": "input",
        "description": "Pulse width modulator input accepting control current from external optocoupler error amplifier; zero input current produces maximum duty cycle while 1 mA reduces duty cycle to zero."
      },
      {
        "number": "14",
        "name": "RT",
        "type": "input",
        "description": "Oscillator frequency control normally biased at 2 V; total external resistance connected between RT and AGND sets the internal oscillator frequency."
      },
      {
        "number": "15",
        "name": "SYNC",
        "type": "bidirectional",
        "description": "Oscillator synchronization input/output; internal oscillator can synchronize to external clock via pulldown device; multiple LM5026 devices can be synchronized by connecting SYNC pins together."
      },
      {
        "number": "16",
        "name": "DCL",
        "type": "input",
        "description": "Maximum duty cycle control; external resistor divider from RT to AGND sets the maximum output duty cycle for OUT_A."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 40,
        "cost_usd": 0.3743,
        "at": "2026-09-24T10:35:20"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lm5026",
        "pages": 40,
        "sha256": "521b7e5713589751",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm5026mtx.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm5026mtx-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "9955d447fcbc4aaf194ec1a7f7858bd13545c1abefa5aec59c135e4f07f8bb03",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "TSSOP-16",
      "Category": "Power Management (PMIC)",
      "Pins": "16"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lm5026mtx"
  ],
  "discovery_pitch": "LM5026MTX (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm5026mtx.kicad_sym",
    "lm5026mtx.kicad_mod",
    "lm5026mtx.glb",
    "lm5026mtx.step",
    "lm5026mtx.lbr",
    "docs/hero.png",
    "docs/lm5026mtx-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  }
}