main
Ray lm5025amtcx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) bbcc857
{
  "schema_version": 1,
  "type": "component",
  "slug": "lm5025amtcx",
  "title": "LM5025AMTCX",
  "brief": "Texas Instruments DC-DC Converters, TSSOP-16. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "pmic",
    "lm5025amtcx"
  ],
  "component": {
    "mpn": "LM5025AMTCX",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-16",
    "pin_count": 16,
    "category": "PMIC",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/lit/ds/symlink/lm5025amtcx.pdf",
    "parts": {
      "symbol": "lm5025amtcx.kicad_sym",
      "footprint": "lm5025amtcx.kicad_mod",
      "model_3d": "lm5025amtcx-etched.glb",
      "model_3d_plain": "lm5025amtcx.glb",
      "model_3d_step": "lm5025amtcx-etched.step",
      "model_3d_step_plain": "lm5025amtcx.step",
      "lbr": "lm5025amtcx.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "Source input voltage to the internal high-voltage start-up regulator. Operating range 13 V to 90 V, with transient capability to 105 V."
      },
      {
        "number": "2",
        "name": "RAMP",
        "type": "input",
        "description": "Modulator ramp input. An external RC circuit from VIN sets the ramp slope; the pin is discharged each cycle by an internal FET triggered by the clock or the Volt-Second clamp comparator."
      },
      {
        "number": "3",
        "name": "CS1",
        "type": "input",
        "description": "Current sense input for cycle-by-cycle current limiting. Outputs enter cycle-by-cycle limit if CS1 exceeds 0.5 V; held low for 50 ns after OUT_A rises (leading-edge blanking)."
      },
      {
        "number": "4",
        "name": "CS2",
        "type": "input",
        "description": "Current sense input for soft restart / cycle skip. If CS2 exceeds 0.5 V the outputs are disabled and a soft-start sequence is initiated; SS is fully discharged then released with a 1-µA pull-up."
      },
      {
        "number": "5",
        "name": "TIME",
        "type": "input",
        "description": "Output overlap and dead-time control. An RSET resistor from TIME to GND produces in-phase OUT_A/OUT_B with overlap; RSET from TIME to REF produces out-of-phase OUT_A/OUT_B with dead time."
      },
      {
        "number": "6",
        "name": "REF",
        "type": "power_out",
        "description": "Precision 5-V reference output. Sourcing up to 10 mA; decouple locally with a 0.1-µF capacitor. Remains low until VCC UV comparator is satisfied."
      },
      {
        "number": "7",
        "name": "VCC",
        "type": "power_in",
        "description": "Output of the internal high-voltage start-up regulator, nominally regulated to 7.6 V. Also the bias supply input for the IC; an auxiliary winding raising VCC above the regulation setpoint shuts down the internal start-up regulator to reduce dissipation."
      },
      {
        "number": "8",
        "name": "OUT_A",
        "type": "output",
        "description": "Main switch PWM gate-driver output. 3-A peak sink capability."
      },
      {
        "number": "9",
        "name": "OUT_B",
        "type": "output",
        "description": "Active clamp switch gate-driver output. 1.25-A peak sink capability."
      },
      {
        "number": "10",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground return for the gate drivers. Connect directly to AGND at a single point."
      },
      {
        "number": "11",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground for the control circuitry. Connect directly to PGND; on the WSON package the exposed pad is electrically connected to AGND."
      },
      {
        "number": "12",
        "name": "SS",
        "type": "input",
        "description": "Soft-start control. An external capacitor with the internal 20-µA source sets the soft-start ramp; source drops to 1 µA after CS2 overcurrent or over-temperature events."
      },
      {
        "number": "13",
        "name": "COMP",
        "type": "input",
        "description": "PWM comparator input. Includes an internal 5-kΩ pull-up; an external opto-coupler sinks current from COMP to control the PWM duty cycle."
      },
      {
        "number": "14",
        "name": "RT",
        "type": "input",
        "description": "Oscillator timing resistor pin. An external resistor from RT to GND sets the internal oscillator frequency (up to 1 MHz)."
      },
      {
        "number": "15",
        "name": "SYNC",
        "type": "input",
        "description": "Oscillator UP/DOWN synchronization input. Accepts an external clock whose frequency is up to 20% lower than or higher than the internal free-running frequency; no maximum sync-frequency constraint."
      },
      {
        "number": "16",
        "name": "UVLO",
        "type": "input",
        "description": "Line undervoltage shutdown input. External divider sets the shutdown threshold (comparator trip 2.5 V); hysteresis provided by a 20-µA internal current source switched at the 2.5-V threshold."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/lm5025amtcx.pdf",
        "pages": 34,
        "sha256": "970dbd727e87b319",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm5025amtcx.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm5025amtcx-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "62207a0099e71bb2b46141577d701d7fa21130cd823511ffc8103239a7f91f7f",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "TSSOP-16",
      "Category": "PMIC",
      "Pins": "16"
    }
  },
  "variants": [
    {
      "mpn": "LM5025AMTCX",
      "kind": "packaging"
    },
    {
      "mpn": "LM5025AMTCXSQ",
      "kind": "packaging"
    },
    {
      "mpn": "LM5025AMTCXSQE",
      "kind": "packaging"
    },
    {
      "mpn": "LM5025AMTCXSQX",
      "kind": "packaging"
    }
  ],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lm5025amtcx"
  ],
  "discovery_pitch": "LM5025AMTCX (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm5025amtcx.kicad_sym",
    "lm5025amtcx.kicad_mod",
    "lm5025amtcx.glb",
    "lm5025amtcx.step",
    "lm5025amtcx.lbr",
    "docs/hero.png",
    "docs/lm5025amtcx-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-28T17:01:08.547Z"
}