component
LM5020MM-2
Public Made by Adomby adom
Texas Instruments DC-DC Converters, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM5020MM-2
Texas Instruments · DC-DC Converters · VSSOP-10-0.5mm
LM5020MM-2 from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | High-voltage power supply input to the start-up regulator with operating range of 13V to 100V. |
| 2 | FB | input | Inverting input of the internal error amplifier with internally connected 1.25V non-inverting reference input. |
| 3 | COMP | output | Output of the error amplifier serving as input to the PWM comparator; includes internal 5kΩ pull-up resistor for opto-coupler biasing. |
| 4 | VCC | power_out | 7.7V regulated output of the internal high voltage series pass regulator; internal regulator shuts down if external voltage exceeds regulation setpoint. |
| 5 | OUT | output | PWM controller gate driver output with 1A peak current source/sink capability. |
| 6 | GND | power_in | Ground return. |
| 7 | UVLO | input | Under-voltage lockout sense pin with 1.25V threshold; external resistor divider from VIN sets shutdown level; 20µA internal current source provides hysteresis. |
| 8 | CS | input | Current sense input for current mode control and cycle-by-cycle over-current protection; 0.5V threshold triggers output shutdown; 50ns leading-edge blanking after OUT transition. |
| 9 | RT/SYNC | input | Oscillator timing resistor pin where external resistor to GND sets switching frequency; also accepts synchronization pulses from external clock. |
| 10 | SS | passive | Soft-start capacitor connection charged by internal 10µA current source to control soft-start ramp rate. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Power Management (PMIC) |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
LM5020MM-2 - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
lm5020mm-2-etched.step/lm5020mm-2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm5020mm-2.step/lm5020mm-2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (21 pp, sha256
b8a952100c1b7734, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).