main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lm5017mrx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lm5017mrx: viewers · Ray
lm5017mrx-etched.fit.json lm5017mrx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm5017mrx-etched.glb lm5017mrx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm5017mrx-etched.step lm5017mrx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm5017mrx.glb Publish 0.1.0 · Ray
lm5017mrx.kicad_mod Publish 0.1.0 · Ray
lm5017mrx.kicad_sym Publish 0.1.0 · Ray
lm5017mrx.lbr Publish 0.1.0 · Ray
lm5017mrx.step Publish 0.1.0 · Ray
package.json lm5017mrx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json lm5017mrx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/lm5017mrx · Ray

LM5017MRX

Texas Instruments · DC-DC Converters · SOIC-8-EP

LM5017MRX from Texas Instruments, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RTN power_in Ground connection of the integrated circuit.
2 VIN power_in Power supply input with operating voltage range from 7.5 V to 100 V.
3 UVLO input Undervoltage detection input; external resistor divider from VIN programs threshold with internal 1.225 V reference; 20-μA hysteresis current source enabled above 1.225 V; pulling below 0.66 V activates shutdown mode.
4 RON input On-time programming input; external resistor to VIN sets buck switch on-time inversely proportional to VIN; minimum 100 ns on-time required at maximum input voltage (100 V).
5 FB input Feedback input to regulation comparator inverting input; internal regulation reference voltage is 1.225 V.
6 VCC power_out Regulated 7.6 V output from internal high-voltage series pass regulator providing bias supply for gate drivers and internal circuitry; 1-μF decoupling capacitor recommended.
7 BST output Bootstrap capacitor connection for high-side gate driver; 0.01-μF ceramic capacitor recommended between BST and SW; charged by VCC regulator through internal diode when SW is low.
8 SW output Switching node output connecting high-side and low-side MOSFETs; connect to output inductor and bootstrap capacitor; switches between VIN and GND.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8-EP
Category Power Management (PMIC)
Pins 9

CAD (KiCad official)

  • Symbol: LM5017MRX
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: SOIC-8-EP (KiCad packages3D, STEP)
  • 3D model files: lm5017mrx-etched.step / lm5017mrx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm5017mrx.step / lm5017mrx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 d36b000ef35121b6, retrieved 2026-09-22, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF