← Commit history

lm5017mrx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·e79dac0ce3 · ·parent 599763f
2 files changed +87−7
package.json+45−5
@@ -65,7 +65,7 @@         "number": "3",         "name": "UVLO",         "type": "input",-        "description": "Undervoltage detection input; external resistor divider from VIN programs threshold with internal 1.225 V reference; 20-\u03bcA hysteresis current source enabled above 1.225 V; pulling below 0.66 V activates shutdown mode."+        "description": "Undervoltage detection input; external resistor divider from VIN programs threshold with internal 1.225 V reference; 20-μA hysteresis current source enabled above 1.225 V; pulling below 0.66 V activates shutdown mode."       },       {         "number": "4",@@ -83,13 +83,13 @@         "number": "6",         "name": "VCC",         "type": "power_out",-        "description": "Regulated 7.6 V output from internal high-voltage series pass regulator providing bias supply for gate drivers and internal circuitry; 1-\u03bcF decoupling capacitor recommended."+        "description": "Regulated 7.6 V output from internal high-voltage series pass regulator providing bias supply for gate drivers and internal circuitry; 1-μF decoupling capacitor recommended."       },       {         "number": "7",         "name": "BST",         "type": "output",-        "description": "Bootstrap capacitor connection for high-side gate driver; 0.01-\u03bcF ceramic capacitor recommended between BST and SW; charged by VCC regulator through internal diode when SW is low."+        "description": "Bootstrap capacitor connection for high-side gate driver; 0.01-μF ceramic capacitor recommended between BST and SW; charged by VCC regulator through internal diode when SW is low."       },       {         "number": "8",@@ -140,6 +140,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lm5017mrx.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.55+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lm5017mrx-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.55+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "95e0cf2ea382c5b287bb55f986497d5cdfdf8691b4544bdea749138453321e0f",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -125,7 +125,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lm5017mrx.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.55+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lm5017mrx-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.55+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "95e0cf2ea382c5b287bb55f986497d5cdfdf8691b4544bdea749138453321e0f",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -173,4 +213,4 @@     "public": true   },   "updated_at": "2026-09-28T17:00:29.614Z"-}\ No newline at end of file+}