component
LM5017MRX
Public Made by Adomby adom
Texas Instruments DC-DC Converters, SOIC-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+46@@ -0,0 +1,46 @@+# LM5017MRX++**Texas Instruments** · DC-DC Converters · SOIC-8-EP++LM5017MRX from Texas Instruments, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | RTN | power_in | Ground connection of the integrated circuit. |+| 2 | VIN | power_in | Power supply input with operating voltage range from 7.5 V to 100 V. |+| 3 | UVLO | input | Undervoltage detection input; external resistor divider from VIN programs threshold with internal 1.225 V reference; 20-μA hysteresis current source enabled above 1.225 V; pulling below 0.66 V activates shutdown mode. |+| 4 | RON | input | On-time programming input; external resistor to VIN sets buck switch on-time inversely proportional to VIN; minimum 100 ns on-time required at maximum input voltage (100 V). |+| 5 | FB | input | Feedback input to regulation comparator inverting input; internal regulation reference voltage is 1.225 V. |+| 6 | VCC | power_out | Regulated 7.6 V output from internal high-voltage series pass regulator providing bias supply for gate drivers and internal circuitry; 1-μF decoupling capacitor recommended. |+| 7 | BST | output | Bootstrap capacitor connection for high-side gate driver; 0.01-μF ceramic capacitor recommended between BST and SW; charged by VCC regulator through internal diode when SW is low. |+| 8 | SW | output | Switching node output connecting high-side and low-side MOSFETs; connect to output inductor and bootstrap capacitor; switches between VIN and GND. |+| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8-EP |+| Category | Power Management (PMIC) |+| Pins | 9 |++## CAD (KiCad official)++- Symbol: `LM5017MRX`+- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`+- 3D model: SOIC-8-EP (KiCad packages3D, STEP)+- 3D model files: `lm5017mrx-etched.step` / `lm5017mrx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm5017mrx.step` / `lm5017mrx.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm5017) (42 pp, sha256 `d36b000ef35121b6`, retrieved 2026-09-22, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm5017mrx-datasheet.pdf)
page.jsonadded+151@@ -0,0 +1,151 @@+{+ "slug": "lm5017mrx",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, SOIC-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "lm5017mrx",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lm5017mrx.kicad_sym",+ "lm5017mrx.kicad_mod",+ "lm5017mrx.glb",+ "lm5017mrx.step",+ "lm5017mrx.lbr",+ "docs/hero.png",+ "docs/lm5017mrx-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "LM5017MRX",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-8-EP",+ "pin_count": 9,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lm5017",+ "parts": {+ "symbol": "lm5017mrx.kicad_sym",+ "footprint": "lm5017mrx.kicad_mod",+ "model_3d": "lm5017mrx-etched.glb",+ "model_3d_plain": "lm5017mrx.glb",+ "model_3d_step": "lm5017mrx-etched.step",+ "model_3d_step_plain": "lm5017mrx.step",+ "lbr": "lm5017mrx.lbr"+ },+ "distributor_links": {+ "lcsc": "C34355"+ },+ "pins": [+ {+ "number": "1",+ "name": "RTN",+ "type": "power_in",+ "description": "Ground connection of the integrated circuit."+ },+ {+ "number": "2",+ "name": "VIN",+ "type": "power_in",+ "description": "Power supply input with operating voltage range from 7.5 V to 100 V."+ },+ {+ "number": "3",+ "name": "UVLO",+ "type": "input",+ "description": "Undervoltage detection input; external resistor divider from VIN programs threshold with internal 1.225 V reference; 20-μA hysteresis current source enabled above 1.225 V; pulling below 0.66 V activates shutdown mode."+ },+ {+ "number": "4",+ "name": "RON",+ "type": "input",+ "description": "On-time programming input; external resistor to VIN sets buck switch on-time inversely proportional to VIN; minimum 100 ns on-time required at maximum input voltage (100 V)."+ },+ {+ "number": "5",+ "name": "FB",+ "type": "input",+ "description": "Feedback input to regulation comparator inverting input; internal regulation reference voltage is 1.225 V."+ },+ {+ "number": "6",+ "name": "VCC",+ "type": "power_out",+ "description": "Regulated 7.6 V output from internal high-voltage series pass regulator providing bias supply for gate drivers and internal circuitry; 1-μF decoupling capacitor recommended."+ },+ {+ "number": "7",+ "name": "BST",+ "type": "output",+ "description": "Bootstrap capacitor connection for high-side gate driver; 0.01-μF ceramic capacitor recommended between BST and SW; charged by VCC regulator through internal diode when SW is low."+ },+ {+ "number": "8",+ "name": "SW",+ "type": "output",+ "description": "Switching node output connecting high-side and low-side MOSFETs; connect to output inductor and bootstrap capacitor; switches between VIN and GND."+ },+ {+ "number": "9",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: BST pin classification reflects that the IC's internal VCC regulator actively charges this node thro; SW pin is a power switching node actively driven by internal MOSFET switching stage; classified as o",+ "exposed pad 9 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 42,+ "cost_usd": 0.4075,+ "at": "2026-09-22T21:35:20"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lm5017",+ "pages": 42,+ "sha256": "d36b000ef35121b6",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 9,+ "described": 9,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}