Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
LM5015MHX
Texas Instruments · DC-DC Converters · HTSSOP-14-EP
LM5015MHX from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AGND | power_in | Analog ground serves as the internal reference for the regulator control functions and should be connected directly to PGND to minimize switching noise. |
| 2 | RT | input | Oscillator frequency programming pin, set by a resistor to AGND, with a recommended switching frequency range of 25 kHz to 750 kHz and optional synchronization input. |
| 3 | FB | input | Feedback input to the inverting input of the internal error amplifier, with an internal 1.26V reference, and connected to AGND in isolated applications. |
| 4 | COMP | input | Control input for the PWM comparator, connected to the open drain output of the internal error amplifier with an internal 5 kΩ pull-up. |
| 5 | CFB | input | Current feedback input for high bandwidth isolated applications, where an NPN current mirror couples opto-coupler current to the PWM comparator. |
| 6 | PGND | power_in | Power ground connected to the current sense resistor in the source of the low side MOSFET switch. |
| 7 | LO | output | Drain terminal of the internal low side power MOSFET, rated for 75 V steady-state to PGND per the absolute maximum ratings. |
| 8 | PVIN | power_in | Input supply pin for the high side switch, internally connected to the drain of the high side power MOSFET, with a 76 V maximum rating to HO, LO and PGND. |
| 9 | HO | output | Source terminal of the high side power MOSFET, with a -3 V to 76 V steady-state rating to PGND. |
| 10 | BST | passive | High side bootstrap bias pin requiring an external capacitor of at least 0.022 µF between BST and HO, with a 14 V maximum rating to HO. |
| 11 | VCC | power_out | Bias regulator output that tracks VIN up to 6.9 V and needs a 0.47 µF or greater ceramic decoupling capacitor, with a 14 V maximum rating to AGND. |
| 12 | VIN | power_in | Analog input voltage pin supplying the switching regulator control blocks, operating over 4.25 V to 75 V with a 76 V absolute maximum to AGND. |
| 13 | EN | input | Enable, undervoltage lockout and shutdown input with a 6 µA internal pull-up when left unconnected and a 14 V maximum rating to AGND. |
| 14 | SS | passive | Soft-start pin, where an internal 11 µA source charges an external capacitor to gradually raise the COMP voltage, with a -0.3 V to 7 V rating to AGND. |
| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-14-EP |
| Category | Power Supply Chip |
| Pins | 15 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Regulator Output | VVCC-REG | 6.35 | 6.85 | 7.25 | V | 4 | |
| VCC UVLO Threshold | 3.45 | 3.75 | 4.05 | V | VCC increasing, VIN = VCC, EN=open | 4 | |
| EN Shutdown Threshold | 0.25 | 0.45 | 0.65 | V | VEN increasing | 4 | |
| EN Standby Threshold | 1.19 | 1.26 | 1.3 | V | VEN increasing | 4 | |
| Cycle by Cycle Current Limit | ILIM | 1 | 1.2 | 1.4 | A | 4 | |
| FSW1 Frequency1 | FSW1 | 180 | 200 | 220 | kHz | RRT = 31.6k | 4 |
| FSW2 Frequency2 | FSW2 | 365 | 405 | 445 | kHz | RRT = 15.4k | 4 |
| SYNC Pulse Width Minimum | 15 | ns | VRT > VRT-SYNC + 0.5V | 4 | |||
| Maximum Duty Cycle | 49 | % | 4 | ||||
| COMP to PWM Comparator Offset | VCOMP-OS | 0.9 | 1.3 | 1.55 | V | 4 | |
| Feedback Reference Voltage | VFB-REF | 1.236 | 1.26 | 1.274 | V | Internal reference, VFB = VCOMP | 4 |
| COMP Short Circuit Current | 0.9 | 1.2 | 1.5 | mA | VFB = 0, VCOMP = 0 | 4 | |
| COMP Open Circuit Voltage | 4.5 | 5.15 | 5.95 | V | VFB = 0 | 4 | |
| Bias Current (IIN) | 3.1 | 4.5 | mA | VFB = 1.5V | 4 | ||
| IQ Shutdown Current (IIN) | IQ | 110 | 170 | µA | VEN = 0V | 4 | |
| Low side MOSFET RDS(ON) plus Current Sense Resistance | 0.49 | 0.93 | Ω | ID = 0.6A | 4 | ||
| Low side MOSFET Leakage Current | 0.05 | 5 | µA | VLO = 75V | 4 | ||
| High side MOSFET RDS(ON) | 0.45 | 0.9 | Ω | ID = 0.6A | 4 | ||
| High side MOSFET Leakage Current | 0.05 | 5 | µA | VPVIN = 75V, VHO = PGND | 4 | ||
| Soft-start Current Source | 8 | 11 | 14 | µA | 5 | ||
| Soft-start to COMP Offset | 0.3 | 0.5 | 0.7 | V | 5 | ||
| VIN to AGND | 76 | V | 3 | ||||
| BST to AGND | 90 | V | 3 | ||||
| PVIN to HO, LO, PGND | 76 | V | 3 | ||||
| HO to PGND (Steady State) | -3 | 76 | V | Steady state | 3 | ||
| LO to PGND (Steady State) | -0.3 | 76 | V | Steady state | 3 | ||
| BST to VCC | 76 | V | 3 | ||||
| BST to HO | 14 | V | 3 | ||||
| VCC, EN to AGND | 14 | V | 3 | ||||
| COMP, FB, RT, SS to AGND | -0.3 | 7 | V | 3 | |||
| PGND to AGND | -0.3 | 0.3 | V | 3 | |||
| CFB Sink Current | 10 | mA | 3 | ||||
| Maximum Junction Temperature | 150 | °C | 3 | ||||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| ESD Rating Human Body Model | 2 | kV | Human Body Model | 3 | |||
| VIN operating range | VIN | 4.25 | 75 | V | 3 | ||
| Operation Junction Temperature | TJ | -40 | 125 | °C | 3 | ||
| Junction to Case thermal resistance | θJC | 6.6 | °C/W | 5 | |||
| Junction to Ambient thermal resistance | θJA | 40 | °C/W | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | Human Body Model(3) 2 kV (1) Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Ratings are conditions under which | 3 |
CAD (KiCad official)
- Symbol:
LM5015MHX - Footprint:
Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm - 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)
- 3D model files:
lm5015mhx-etched.step/lm5015mhx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm5015mhx.step/lm5015mhx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
2f0d4541827b6c95, retrieved 2026-11-06, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).