main
Ray
lm5007mmx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
416474b
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202
{
"schema_version": 1,
"type": "component",
"slug": "lm5007mmx",
"title": "LM5007MMX",
"brief": "Texas Instruments DC-DC Converters, VSSOP-8-0.65mm. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"version": "0.2.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"pmic",
"lm5007mmx"
],
"component": {
"mpn": "LM5007MMX",
"manufacturer": "Texas Instruments",
"package": "VSSOP-8-0.65mm",
"pin_count": 8,
"category": "PMIC",
"subcategory": "DC-DC Converters",
"datasheet": "https://www.ti.com/lit/ds/symlink/lm5007mmx.pdf",
"parts": {
"symbol": "lm5007mmx.kicad_sym",
"footprint": "lm5007mmx.kicad_mod",
"model_3d": "lm5007mmx-etched.glb",
"model_3d_plain": "lm5007mmx.glb",
"model_3d_step": "lm5007mmx-etched.step",
"model_3d_step_plain": "lm5007mmx.step",
"lbr": "lm5007mmx.lbr"
},
"distributor_links": {},
"pins": [
{
"number": "1",
"name": "SW",
"type": "output",
"description": "Switching node. Drain of the internal N-channel buck switch; connect to the LC output filter (inductor to VOUT and freewheel diode to GND). Also referenced by the BST bootstrap capacitor."
},
{
"number": "2",
"name": "BST",
"type": "input",
"description": "Boot-strap capacitor input for the high-side gate driver. An external 0.01 uF ceramic capacitor is required between BST and SW; an internal diode from VCC to BST completes the bootstrap network."
},
{
"number": "3",
"name": "RCL",
"type": "input",
"description": "Current-limit off-time programming pin. A resistor from RCL to RTN sets the off-time per cycle in current limit: Toff = 1e-5 / (0.59 + (FB / 7.22e-6 x RCL)). Off-time preset to 17 us when FB = 0 V and decreases as FB rises."
},
{
"number": "4",
"name": "RTN",
"type": "power_in",
"description": "Circuit ground return for the device."
},
{
"number": "5",
"name": "FB",
"type": "input",
"description": "Feedback signal from the regulated output; connected to the inverting input of the internal regulation comparator. Internal reference threshold is 2.5 V (2.445 V min / 2.550 V max); FB bias current 100 nA typ; FB over-voltage trip 2.875 V."
},
{
"number": "6",
"name": "RON",
"type": "input",
"description": "On-time set pin (also serves as the shutdown input). A resistor between RON and VIN programs the switch on-time: Ton = 1.42e-10 x RON / VIN. Minimum recommended on-time is 300 ns at max VIN. Pulling RON low (0 V) shuts the device down (remote shutdown threshold ~0.7 V)."
},
{
"number": "7",
"name": "VCC",
"type": "power_out",
"description": "Output of the internal high-voltage bias regulator, nominally 7 V (6.6 to 7.4 V). Provides gate-drive power for the internal buck switch and feeds the BST diode. Requires a local 0.1 uF decoupling capacitor. Series pass regulator is current limited to ~10 mA (11 mA typ). An external voltage above 7 V on FB will shut the internal regulator down; do not exceed 14 V on this pin."
},
{
"number": "8",
"name": "VIN",
"type": "power_in",
"description": "Input supply voltage. Recommended operating range 9 V to 75 V; absolute-maximum 80 V. Drain of the internal buck switch is powered from this rail."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/lm5007mmx.pdf",
"pages": 25,
"sha256": "13e9052ebcf1f85b",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lm5007mmx.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.1,
2,
0.85
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "353552981eef35cb93635057d4aeb89aef22648c77af6fd095e328bfe6b834bd",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lm5007mmx-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.1,
2,
0.85
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "9697f158800fdc1e18b232d564f3a582b689fb1dbeb050d4c7b5189c52e92ef0",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "VSSOP-8-0.65mm",
"Category": "PMIC",
"Pins": "8"
}
},
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"lm5007mmx"
],
"discovery_pitch": "LM5007MMX (Texas Instruments) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lm5007mmx.kicad_sym",
"lm5007mmx.kicad_mod",
"lm5007mmx.glb",
"lm5007mmx.step",
"lm5007mmx-etched.step",
"lm5007mmx.lbr",
"docs/hero.png",
"docs/lm5007mmx-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"visibility": {
"public": true
},
"variants": [
{
"mpn": "LM5007MMX",
"kind": "packaging"
},
{
"mpn": "LM5007MMXSD",
"kind": "packaging"
},
{
"mpn": "LM5007MMXSDX",
"kind": "packaging"
}
],
"updated_at": "2026-09-28T16:59:50.978Z"
}