main
Ray
Initial commit: component/lm5006mm
7f37fd9
LM5006MM
Texas Instruments · DC-DC Converters · MSOP-10
LM5006MM from Texas Instruments, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switch node connected to output inductor, freewheeling diode/synchronous rectifier FET, and bootstrap capacitor. |
| 2 | BST | output | Bootstrap capacitor connection (0.01μF minimum ceramic) charged from VCC through internal diode when SW is low. |
| 3 | LG | output | Low-side gate driver output (250mA source, 300mA sink peak) driving external N-channel MOSFET for synchronous rectification. |
| 4 | RTN | power_in | Ground reference for entire circuit. |
| 5 | UV | input | Under-voltage input pin (maximum 5V) with programmable detection threshold at 2.5V and internal 5μA hysteresis current source. |
| 6 | UVO | tri_state | Open-drain under-voltage output indicator (10V maximum) pulled low when UV below 2.5V or when shutdown/UVLO functions invoked. |
| 7 | FB | input | Feedback input (maximum 5V) to regulation comparator negative input with 2.5V internal reference. |
| 8 | RT/SD | input | On-time setting input (via series resistor to VIN) and shutdown input; minimum 200ns on-time recommended at maximum input voltage. |
| 9 | VCC | power_out | Regulated 7.5V output (current limit approximately 30mA) from internal series regulator supplying gate driver and control circuits; requires 1μF ceramic bypass capacitor. |
| 10 | VIN | power_in | Input voltage supply with operating range of 6V to 75V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-10 |
| Category | Power Management (PMIC) |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
LM5006MM - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files:
lm5006mm-etched.step/lm5006mm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm5006mm.step/lm5006mm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
007c90408ebfc48e, retrieved 2026-10-01, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM5006MM
**Texas Instruments** · DC-DC Converters · MSOP-10
LM5006MM from Texas Instruments, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switch node connected to output inductor, freewheeling diode/synchronous rectifier FET, and bootstrap capacitor. |
| 2 | BST | output | Bootstrap capacitor connection (0.01μF minimum ceramic) charged from VCC through internal diode when SW is low. |
| 3 | LG | output | Low-side gate driver output (250mA source, 300mA sink peak) driving external N-channel MOSFET for synchronous rectification. |
| 4 | RTN | power_in | Ground reference for entire circuit. |
| 5 | UV | input | Under-voltage input pin (maximum 5V) with programmable detection threshold at 2.5V and internal 5μA hysteresis current source. |
| 6 | UVO | tri_state | Open-drain under-voltage output indicator (10V maximum) pulled low when UV below 2.5V or when shutdown/UVLO functions invoked. |
| 7 | FB | input | Feedback input (maximum 5V) to regulation comparator negative input with 2.5V internal reference. |
| 8 | RT/SD | input | On-time setting input (via series resistor to VIN) and shutdown input; minimum 200ns on-time recommended at maximum input voltage. |
| 9 | VCC | power_out | Regulated 7.5V output (current limit approximately 30mA) from internal series regulator supplying gate driver and control circuits; requires 1μF ceramic bypass capacitor. |
| 10 | VIN | power_in | Input voltage supply with operating range of 6V to 75V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-10 |
| Category | Power Management (PMIC) |
| Pins | 10 |
## CAD (KiCad official)
- Symbol: `LM5006MM`
- Footprint: `Package_SO:MSOP-10_3x3mm_P0.5mm`
- 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files: `lm5006mm-etched.step` / `lm5006mm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm5006mm.step` / `lm5006mm.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm5006) (24 pp, sha256 `007c90408ebfc48e`, retrieved 2026-10-01, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm5006mm-datasheet.pdf)