main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lm4990mm: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lm4990mm: viewers · Ray
lm4990mm-etched.fit.json lm4990mm: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm4990mm-etched.glb lm4990mm: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm4990mm-etched.step lm4990mm: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm4990mm.glb Publish 0.1.0 · Ray
lm4990mm.kicad_mod Publish 0.1.0 · Ray
lm4990mm.kicad_sym Publish 0.1.0 · Ray
lm4990mm.lbr Publish 0.1.0 · Ray
lm4990mm.step Publish 0.1.0 · Ray
package.json lm4990mm: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json lm4990mm: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/lm4990mm · Ray

LM4990MM

Texas Instruments · Audio Amplifiers · VSSOP-8

LM4990MM from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SHUTDOWN input Active-low shutdown control input; for the DGK package the Shutdown Mode is permanently fixed as shutdown-low (SD MODE internally tied to GND), so driving this pin low places the device in shutdown (ISD typ 0.1 µA, max 2.0 µA).
2 BYPASS passive Internal half-supply (VDD/2) voltage divider bypass pin; a 1.0 µF capacitor to GND is recommended here to minimize turn-on pop and to set the ramp rate of the quiescent DC output voltage.
3 +IN input Non-inverting audio signal input to the first internal operational amplifier; input voltage range −0.3 V to VDD + 0.3 V absolute maximum.
4 -IN input Inverting audio signal input to the first internal operational amplifier; closed-loop gain is set by the ratio of external feedback resistor Rf to input resistor Ri connected to this pin.
5 VO1 output BTL output of the first (gain-configurable) amplifier; biased at VDD/2 quiescent, delivers up to 1.25 W into 8 Ω at 5 V with ≤1% THD+N.
6 VDD power_in Positive power supply pin; operating range 2.2 V to 5.5 V, absolute maximum 6.0 V; bypass with a 10 µF bulk capacitor and a ceramic decoupling capacitor placed as close to the pin as possible.
7 GND power_in Ground reference pin; all voltages in the datasheet are measured with respect to this pin.
8 VO2 output BTL output of the second internal unity-gain inverting amplifier; 180° out of phase with VO1 to form the bridge-tied load; biased at VDD/2 quiescent.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Amplifiers/Comparators
Pins 8

CAD (KiCad official)

  • Symbol: LM4990MM
  • Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
  • 3D model: VSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: lm4990mm-etched.step / lm4990mm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm4990mm.step / lm4990mm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 99609ebc1689ea83, retrieved 2026-09-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-sonnet-4-6 (text+vision), consensus claude-opus-4-7 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF