main
History Download
Ray lm4871mx: laser-etched CAD + chip hero (factory 2.0.0 backfill) 1559253

LM4871MX

Texas Instruments · Audio Power OpAmps · SOIC-8

LM4871MX from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SHUTDOWN input Micropower shutdown control. Pulling this pin to VDD activates shutdown mode (IQ = 0.6 µA typ); tie low (via RPU pull-up to VDD with switch to GND, or drive logic-low) for normal operation.
2 BYPASS passive Half-supply (VDD/2) bypass node from the internal 100 kΩ/100 kΩ divider. Connect an external bypass capacitor CB (typ 1.0 µF) to GND for PSRR and click/pop suppression.
3 +IN input Non-inverting input of the first amplifier stage. Typically tied to the BYPASS (VDD/2) reference through the internal biasing shown in the typical application.
4 -IN input Inverting input of the first amplifier stage. Audio input is AC-coupled through Ci (typ 0.39 µF) and Ri (typ 20 kΩ); closed-loop gain set by Rf/Ri (Av = -2·Rf/Ri for BTL).
5 Vo1 output First bridged output. Connects to one side of the 8Ω speaker load; the pair Vo1/Vo2 form a BTL output capable of 1.5 W (typ) into 8Ω at 10% THD, 5V supply.
6 VDD power_in Positive supply, 2.0 V to 5.5 V (6.0 V absolute max). Bypass with CS (typ 1.0 µF tantalum) to GND close to the pin.
7 GND power_in Device ground return. All signal and supply references measured with respect to this pin.
8 Vo2 output Second bridged output (internal Av = -1 inverter of Vo1). Connects to the opposite side of the speaker from Vo1 to form the BTL drive.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • LM4871MXM
  • LM4871MX
  • LM4871MXMM
  • LM4871MXMMX
  • LM4871MXN
  • LM4871MXLD
  • LM4871MXLDX

CAD (KiCad official)

  • Symbol: LM4871MX
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: lm4871mx-etched.step / lm4871mx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm4871mx.step / lm4871mx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (24 pp, sha256 6a0761fa3d77aa82, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF