component
LM4871MM
Public Made by Adomby adom
Texas Instruments Audio Amplifiers, VSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM4871MM
Texas Instruments · Audio Amplifiers · VSSOP-8
LM4871MM from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SHUTDOWN | input | Shutdown control that turns off the amplifier bias circuitry when a logic high (VDD) is applied, giving 0.6µA typical shutdown current; it must be tied to a definite voltage. |
| 2 | BYPASS | passive | Half-supply bypass node that connects to an external capacitor CB (1.0µF recommended) to ground for PSRR and turn-on click and pop performance. |
| 3 | +IN | input | Non-inverting amplifier input. |
| 4 | -IN | input | Inverting amplifier input that sets the closed-loop gain through Ri and Rf, where AVD = 2*(Rf/Ri). |
| 5 | Vo1 | output | Bridged amplifier output 1, driving one side of the load, 180° out of phase with Vo2. |
| 6 | VDD | power_in | Positive supply input for a supply range of 2.0V to 5.5V (absolute maximum 6.0V), which needs a bypass capacitor placed close to the pin. |
| 7 | GND | power_in | Ground connection. |
| 8 | Vo2 | output | Bridged amplifier output 2, driving the other side of the load, 180° out of phase with Vo1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
LM4871MM - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lm4871mm-etched.step/lm4871mm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm4871mm.step/lm4871mm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
53dd6f523163b7af, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).