component
LM4853MM
Public Made by Adomby adom
Texas Instruments Audio Amplifiers, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM4853MM
Texas Instruments · Audio Amplifiers · VSSOP-10-0.5mm
LM4853MM from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LEFT IN | input | Left channel audio input to amplifier A1, with gain set by external Ri and Rf resistors. |
| 2 | SHUTDOWN | input | Active-high shutdown input; logic high of 2.0V min shuts down the amplifier bias, logic low is 0.8V max, and it should be tied to a fixed voltage. |
| 3 | HP-IN | input | Headphone sense input; logic low selects mono BTL mode and logic high selects stereo SE mode. |
| 4 | GND | power_in | Ground pin. |
| 5 | RIGHT IN | input | Right channel audio input, which is summed into A1 in BTL mode and drives A3 in SE mode. |
| 6 | RIGHT OUT | output | Right channel single-ended output from A3, which is high impedance in BTL mode. |
| 7 | BYPASS | passive | Half-supply bypass pin that connects to external capacitor CB for half-supply filtering, PSRR and click-and-pop performance. |
| 8 | BTL OUT+ | output | Positive bridge-tied load output from amplifier A2 for the mono speaker. |
| 9 | VDD | power_in | Positive supply pin, operating range 2.4V to 5.5V, with a bypass capacitor placed close to the pin. |
| 10 | LEFT OUT/BTL OUT- | output | Left channel single-ended output in SE mode and negative bridge-tied load output from A1 in BTL mode. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Amplifiers/Comparators |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
LM4853MM - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
lm4853mm-etched.step/lm4853mm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm4853mm.step/lm4853mm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
d7a25b16dccd5e11, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).