main
Ray lm48511sqx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 3d01f83
{
  "slug": "lm48511sqx",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Audio Amplifiers, WQFN-24-EP(4x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "lm48511sqx",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm48511sqx.kicad_sym",
    "lm48511sqx.kicad_mod",
    "lm48511sqx.glb",
    "lm48511sqx.step",
    "lm48511sqx.lbr",
    "docs/hero.png",
    "docs/lm48511sqx-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "LM48511SQX",
    "manufacturer": "Texas Instruments",
    "package": "WQFN-24-EP(4x5)",
    "pin_count": 25,
    "category": "Amplifiers/Comparators",
    "subcategory": "Audio Amplifiers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lm48511",
    "parts": {
      "symbol": "lm48511sqx.kicad_sym",
      "footprint": "lm48511sqx.kicad_mod",
      "model_3d": "lm48511sqx-etched.glb",
      "model_3d_plain": "lm48511sqx.glb",
      "model_3d_step": "lm48511sqx-etched.step",
      "model_3d_step_plain": "lm48511sqx.step",
      "lbr": "lm48511sqx.lbr"
    },
    "distributor_links": {
      "lcsc": "C527406"
    },
    "pins": [
      {
        "number": "1",
        "name": "FB_SEL",
        "type": "input",
        "description": "Regulator feedback select input; connect to VDD to select feedback network connected to FB_GND1, or connect to GND to select feedback network connected to FB_GND0."
      },
      {
        "number": "2",
        "name": "SW",
        "type": "passive",
        "description": "Drain of the internal FET switch for boost converter switching stage."
      },
      {
        "number": "3",
        "name": "SW",
        "type": "passive",
        "description": "Drain of the internal FET switch for boost converter switching stage."
      },
      {
        "number": "4",
        "name": "SOFTSTART",
        "type": "passive",
        "description": "Soft-start capacitor connection point for limiting transient current at start-up."
      },
      {
        "number": "5",
        "name": "SD_AMP",
        "type": "input",
        "description": "Amplifier active-low shutdown input; connect to VDD for normal operation or to GND to disable amplifier."
      },
      {
        "number": "6",
        "name": "SS/FF",
        "type": "input",
        "description": "Modulation mode select input; connect to VDD for spread spectrum mode (SS) or to GND for fixed frequency mode (FF)."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Signal ground for analog circuits and Class D amplifier."
      },
      {
        "number": "8",
        "name": "LS+",
        "type": "output",
        "description": "Amplifier noninverting output; supplies current to positive terminal of speaker load."
      },
      {
        "number": "9",
        "name": "LSGND",
        "type": "power_in",
        "description": "Amplifier H-Bridge ground, part of the output stage power return path."
      },
      {
        "number": "10",
        "name": "PV1",
        "type": "power_in",
        "description": "Amplifier H-Bridge power supply input; must be connected to V1 for proper operation."
      },
      {
        "number": "11",
        "name": "LSGND",
        "type": "power_in",
        "description": "Amplifier H-Bridge ground, part of the output stage power return path."
      },
      {
        "number": "12",
        "name": "LS–",
        "type": "output",
        "description": "Amplifier inverting output; supplies current to negative terminal of speaker load."
      },
      {
        "number": "13",
        "name": "V1",
        "type": "power_in",
        "description": "Amplifier supply voltage node; connect to PV1 from boost converter output."
      },
      {
        "number": "14",
        "name": "VGO+",
        "type": "output",
        "description": "Amplifier noninverting gain output stage signal for feedback resistor network."
      },
      {
        "number": "15",
        "name": "IN–",
        "type": "input",
        "description": "Amplifier inverting input for differential audio signal; input impedance determined by external input resistors."
      },
      {
        "number": "16",
        "name": "IN+",
        "type": "input",
        "description": "Amplifier noninverting input for differential audio signal; input impedance determined by external input resistors."
      },
      {
        "number": "17",
        "name": "VGO–",
        "type": "output",
        "description": "Amplifier inverting gain output stage signal for feedback resistor network."
      },
      {
        "number": "18",
        "name": "VDD",
        "type": "power_in",
        "description": "Power supply input, operating range 3 V to 5.5 V with 9 V absolute maximum rating."
      },
      {
        "number": "19",
        "name": "FB",
        "type": "input",
        "description": "Regulator feedback input connected to midpoint of external voltage divider network to set boost output voltage."
      },
      {
        "number": "20",
        "name": "FB_GND1",
        "type": "power_in",
        "description": "Ground return for R2 resistor in voltage divider network; selected when FB_SEL = VDD."
      },
      {
        "number": "21",
        "name": "FB_GND0",
        "type": "power_in",
        "description": "Ground return for R1 resistor in voltage divider network; selected when FB_SEL = GND."
      },
      {
        "number": "22",
        "name": "REGGND",
        "type": "power_in",
        "description": "Power ground for boost converter switching stage and regulator circuits."
      },
      {
        "number": "23",
        "name": "REGGND",
        "type": "power_in",
        "description": "Power ground for boost converter switching stage and regulator circuits."
      },
      {
        "number": "24",
        "name": "SD_BOOST",
        "type": "input",
        "description": "Regulator active-low shutdown input; connect to VDD for normal operation or to GND to disable boost regulator."
      },
      {
        "number": "25",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "exposed pad 25 added from the footprint"
        ],
        "pages_sent": 28,
        "cost_usd": 0.3385,
        "at": "2026-09-23T13:12:23"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lm48511",
        "pages": 28,
        "sha256": "47fbd38c5dc884f1",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm48511sqx.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          5.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "dd34955bd2f41c7d5d4f45257df2b8077e42f694598de69e58ad55ad191eecae",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm48511sqx-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          5.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b6ee3f47f362888a5de21a7b53afd8f2ed5d08fd56fce9ab608ffac5e69a5ece",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}