main
Ray
Publish 0.1.0
92a6df0
LM48511SQ
Texas Instruments · Audio Power OpAmps · WQFN-24-EP(4x5)
LM48511SQ from Texas Instruments, in a WQFN-24-EP(4x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB_SEL | input | Regulator feedback select: connect to VDD to select the feedback network on FB_GND1, or to GND to select the network on FB_GND0. |
| 2 | SW | passive | Drain of the internal boost-converter FET switch. |
| 3 | SW | passive | Drain of the internal boost-converter FET switch. |
| 4 | SOFT-START | passive | Soft-start capacitor connection that sets the boost reference ramp; a 0.1 µF capacitor is recommended for a typical application. |
| 5 | SD_AMP | input | Amplifier active-low shutdown: connect to VDD for normal operation and to GND to disable the amplifier. |
| 6 | SS/FF | input | Modulation mode select: connect to VDD for spread spectrum mode (SS) or to GND for fixed frequency mode (FF). |
| 7 | GND | power_in | Signal (quiet) ground. |
| 8 | LS+ | output | Amplifier noninverting (positive) Class D output. |
| 9 | LSGND | power_in | Amplifier H-bridge ground. |
| 10 | PV1 | power_in | Amplifier H-bridge power supply; connect to V1. |
| 11 | LSGND | power_in | Amplifier H-bridge ground. |
| 12 | LS- | output | Amplifier inverting (negative) Class D output. |
| 13 | V1 | power_in | Amplifier supply voltage; connect to PV1. |
| 14 | VG0+ | output | Amplifier noninverting gain output. |
| 15 | IN- | input | Amplifier inverting input. |
| 16 | IN+ | input | Amplifier noninverting input. |
| 17 | VG0- | output | Amplifier inverting gain output. |
| 18 | VDD | power_in | Power supply; 3 V to 5.5 V recommended operating range, 9 V absolute maximum. |
| 19 | FB | input | Regulator feedback input; connect to an external resistive divider to set the boost output voltage. |
| 20 | FB_GND1 | power_in | Ground return for the R3/R2 feedback divider, switched in when FB_SEL = VDD. |
| 21 | FB_GND0 | power_in | Ground return for the R3/R1 feedback divider, switched in when FB_SEL = GND. |
| 22 | REGGND | power_in | Power ground for the boost converter. |
| 23 | REGGND | power_in | Power ground for the boost converter. |
| 24 | SD_BOOST | input | Regulator active-low shutdown: connect to VDD for normal operation and to GND to disable the regulator. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-24-EP(4x5) |
| Category | Amplifiers |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VDD, PV1, V1) | 9 | V | 5 | ||||
| Input voltage | -0.3 | V | Maximum printed as VDD + 0.3 (not numeric; max left null) | 5 | |||
| Junction temperature | 150 | °C | 5 | ||||
| Storage temperature | -65 | 150 | °C | 5 | |||
| Temperature range | TA | -40 | 85 | °C | TMIN ≤ TA ≤ TMAX | 5 | |
| Supply voltage (VDD) | VDD | 3 | 5.5 | V | 5 | ||
| Amplifier voltage (PV1, V1) | PV1, V1 | 4.8 | 8 | V | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 32.8 | °C/W | NHZ (WQFN) 24 pins | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 3.8 | °C/W | NHZ (WQFN) 24 pins | 5 | ||
| Quiescent power supply current, spread spectrum mode | IDD | 14.5 | 22 | mA | VDD = 5 V, PV1 = 7.8 V; VIN = 0, RLOAD = ∞; SS mode | 6 | |
| Shutdown current | ISD | 0.11 | 1 | μA | VDD = 5 V; VSD_BOOST = VSD_AMP = SS = FB_SEL = GND | 6 | |
| Logic voltage input high | VIH | 1.4 | V | VDD = 5 V | 6 | ||
| Logic voltage input low | VIL | 0.4 | V | VDD = 5 V | 6 | ||
| Output offset voltage | VOS | 0.04 | 3 | mV | VDD = 5 V; see note (4) | 6 | |
| Output power, spread spectrum mode, THD+N = 1% | PO | 2.6 | 3 | W | VDD = 5 V, PV1 = 7.8 V; RL = 8 Ω, f = 1 kHz, BW = 22 kHz, THD+N = 1% | 6 | |
| Quiescent power supply current, spread spectrum mode | IDD | 17.5 | 26.6 | mA | VDD = 3.6 V, PV1 = 7 V; VIN = 0, RLOAD = ∞; SS mode | 7 | |
| Shutdown current | ISD | 0.03 | 1 | μA | VDD = 3.6 V; VSD_BOOST = VSD_AMP = SS = FB_SEL = GND | 7 | |
| Logic voltage input high | VIH | 0.96 | V | VDD = 3.6 V | 7 | ||
| Logic voltage input low | VIL | 0.84 | V | VDD = 3.6 V | 7 | ||
| Quiescent power supply current, spread spectrum mode | IDD | 9.5 | mA | VDD = 3 V, PV1 = 4.8 V; VIN = 0, RLOAD = ∞; SS mode | 8 | ||
| Shutdown current | ISD | 0.01 | 1 | μA | VDD = 3 V; VSD_BOOST = VSD_AMP = SS = FB_SEL = GND | 8 | |
| Logic voltage input high | VIH | 0.91 | V | VDD = 3 V | 8 | ||
| Logic voltage input low | VIL | 0.79 | V | VDD = 3 V | 8 | ||
| Output power, spread spectrum mode, THD+N = 1% | PO | 0.84 | 1 | W | VDD = 3 V, PV1 = 4.8 V; RL = 8 Ω, f = 1 kHz, BW = 22 kHz, THD+N = 1% | 8 |
CAD (KiCad official)
- Symbol:
LM48511SQ - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm - 3D model: WQFN-24-EP(4x5) (KiCad packages3D, STEP)
- 3D model files:
lm48511sq-etched.step/lm48511sq-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm48511sq.step/lm48511sq.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
47fbd38c5dc884f1, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM48511SQ
**Texas Instruments** · Audio Power OpAmps · WQFN-24-EP(4x5)
LM48511SQ from Texas Instruments, in a WQFN-24-EP(4x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB_SEL | input | Regulator feedback select: connect to VDD to select the feedback network on FB_GND1, or to GND to select the network on FB_GND0. |
| 2 | SW | passive | Drain of the internal boost-converter FET switch. |
| 3 | SW | passive | Drain of the internal boost-converter FET switch. |
| 4 | SOFT-START | passive | Soft-start capacitor connection that sets the boost reference ramp; a 0.1 µF capacitor is recommended for a typical application. |
| 5 | SD_AMP | input | Amplifier active-low shutdown: connect to VDD for normal operation and to GND to disable the amplifier. |
| 6 | SS/FF | input | Modulation mode select: connect to VDD for spread spectrum mode (SS) or to GND for fixed frequency mode (FF). |
| 7 | GND | power_in | Signal (quiet) ground. |
| 8 | LS+ | output | Amplifier noninverting (positive) Class D output. |
| 9 | LSGND | power_in | Amplifier H-bridge ground. |
| 10 | PV1 | power_in | Amplifier H-bridge power supply; connect to V1. |
| 11 | LSGND | power_in | Amplifier H-bridge ground. |
| 12 | LS- | output | Amplifier inverting (negative) Class D output. |
| 13 | V1 | power_in | Amplifier supply voltage; connect to PV1. |
| 14 | VG0+ | output | Amplifier noninverting gain output. |
| 15 | IN- | input | Amplifier inverting input. |
| 16 | IN+ | input | Amplifier noninverting input. |
| 17 | VG0- | output | Amplifier inverting gain output. |
| 18 | VDD | power_in | Power supply; 3 V to 5.5 V recommended operating range, 9 V absolute maximum. |
| 19 | FB | input | Regulator feedback input; connect to an external resistive divider to set the boost output voltage. |
| 20 | FB_GND1 | power_in | Ground return for the R3/R2 feedback divider, switched in when FB_SEL = VDD. |
| 21 | FB_GND0 | power_in | Ground return for the R3/R1 feedback divider, switched in when FB_SEL = GND. |
| 22 | REGGND | power_in | Power ground for the boost converter. |
| 23 | REGGND | power_in | Power ground for the boost converter. |
| 24 | SD_BOOST | input | Regulator active-low shutdown: connect to VDD for normal operation and to GND to disable the regulator. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-24-EP(4x5) |
| Category | Amplifiers |
| Pins | 25 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VDD, PV1, V1) | | | | 9 | V | | 5 |
| Input voltage | | -0.3 | | | V | Maximum printed as VDD + 0.3 (not numeric; max left null) | 5 |
| Junction temperature | | | | 150 | °C | | 5 |
| Storage temperature | | -65 | | 150 | °C | | 5 |
| Temperature range | TA | -40 | | 85 | °C | TMIN ≤ TA ≤ TMAX | 5 |
| Supply voltage (VDD) | VDD | 3 | | 5.5 | V | | 5 |
| Amplifier voltage (PV1, V1) | PV1, V1 | 4.8 | | 8 | V | | 5 |
| Junction-to-ambient thermal resistance | RθJA | | 32.8 | | °C/W | NHZ (WQFN) 24 pins | 5 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 3.8 | | °C/W | NHZ (WQFN) 24 pins | 5 |
| Quiescent power supply current, spread spectrum mode | IDD | | 14.5 | 22 | mA | VDD = 5 V, PV1 = 7.8 V; VIN = 0, RLOAD = ∞; SS mode | 6 |
| Shutdown current | ISD | | 0.11 | 1 | μA | VDD = 5 V; VSD_BOOST = VSD_AMP = SS = FB_SEL = GND | 6 |
| Logic voltage input high | VIH | 1.4 | | | V | VDD = 5 V | 6 |
| Logic voltage input low | VIL | | | 0.4 | V | VDD = 5 V | 6 |
| Output offset voltage | VOS | | 0.04 | 3 | mV | VDD = 5 V; see note (4) | 6 |
| Output power, spread spectrum mode, THD+N = 1% | PO | | 2.6 | 3 | W | VDD = 5 V, PV1 = 7.8 V; RL = 8 Ω, f = 1 kHz, BW = 22 kHz, THD+N = 1% | 6 |
| Quiescent power supply current, spread spectrum mode | IDD | | 17.5 | 26.6 | mA | VDD = 3.6 V, PV1 = 7 V; VIN = 0, RLOAD = ∞; SS mode | 7 |
| Shutdown current | ISD | | 0.03 | 1 | μA | VDD = 3.6 V; VSD_BOOST = VSD_AMP = SS = FB_SEL = GND | 7 |
| Logic voltage input high | VIH | 0.96 | | | V | VDD = 3.6 V | 7 |
| Logic voltage input low | VIL | | | 0.84 | V | VDD = 3.6 V | 7 |
| Quiescent power supply current, spread spectrum mode | IDD | | 9.5 | | mA | VDD = 3 V, PV1 = 4.8 V; VIN = 0, RLOAD = ∞; SS mode | 8 |
| Shutdown current | ISD | | 0.01 | 1 | μA | VDD = 3 V; VSD_BOOST = VSD_AMP = SS = FB_SEL = GND | 8 |
| Logic voltage input high | VIH | 0.91 | | | V | VDD = 3 V | 8 |
| Logic voltage input low | VIL | | | 0.79 | V | VDD = 3 V | 8 |
| Output power, spread spectrum mode, THD+N = 1% | PO | | 0.84 | 1 | W | VDD = 3 V, PV1 = 4.8 V; RL = 8 Ω, f = 1 kHz, BW = 22 kHz, THD+N = 1% | 8 |
## CAD (KiCad official)
- Symbol: `LM48511SQ`
- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm`
- 3D model: WQFN-24-EP(4x5) (KiCad packages3D, STEP)
- 3D model files: `lm48511sq-etched.step` / `lm48511sq-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm48511sq.step` / `lm48511sq.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm48511.pdf) (28 pp, sha256 `47fbd38c5dc884f1`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm48511sq-datasheet.pdf)