3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM4808MM
Texas Instruments · Audio Amplifiers · VSSOP-8 (DGK)
LM4808MM from Texas Instruments, in a VSSOP-8 (DGK). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Channel A amplifier output, typically AC-coupled to the load through output capacitor Co (e.g. 32Ω load). |
| 2 | IN A (-) | input | Channel A inverting input, connected through input resistor Ri and coupling capacitor Ci, with Rf setting closed-loop gain. |
| 3 | IN A (+) | input | Channel A non-inverting input, biased to 1/2 VDD by the RB divider and bypassed with CB (1.0µF recommended). |
| 4 | GND | power_in | Ground connection for the device. |
| 5 | IN B (+) | input | Channel B non-inverting input, biased to 1/2 VDD by the RB divider and bypassed with CB. |
| 6 | IN B (-) | input | Channel B inverting input, connected through input resistor Ri and coupling capacitor Ci, with Rf setting closed-loop gain. |
| 7 | OUT B | output | Channel B amplifier output, typically AC-coupled to the load through output capacitor Co. |
| 8 | VDD | power_in | Positive supply pin, 2.0V to 5.5V operating range (6.0V absolute maximum), bypassed with a 0.1µF capacitor CS to ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 (DGK) |
| Category | Amplifiers/Comparators |
| Pins | 8 |
CAD (Adom-generated)
- Symbol:
LM4808MM - Footprint:
Adom_Gen:Texas_Instruments_DGK0008A - 3D model: generated to fit the land (STEP)
- 3D model files:
lm4808mm-etched.step/lm4808mm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm4808mm.step/lm4808mm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
e622bbed694002d4, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: TI DGK0008A EXAMPLE BOARD LAYOUT (4214862/A), SNAS051D p.24, LAND PATTERN EXAMPLE: 8X pads 1.4 x 0.45 mm, (R0.05) TYP corners, 6X pitch 0.65 mm, pad row centre-to-centre (4.4) mm, so pads at x = +/-2.2, y = +/-0.325, +/-0.975. Body from PACKAGE OUTLINE p.23: 3.0 x 3.0 (2.9-3.1) mm, 1.1 mm max height, lead span 4.75-5.05. Task master ruling 2026-11-21: the maker's printed land wins over VSSOP-8_2.3x2mm_P0.5mm (a 0.5-pitch land) and KiCad's VSSOP-8_3x3mm_P0.65mm (1.625 x 0.5 at +/-2.1125).