Generated by kicad-footprint-generator · KiCad file format 20260206
LM45CIM3
Texas Instruments · Temperature Sensors · SOT-23
LM45CIM3 from Texas Instruments, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +VS | power_in | Positive supply input, operating range +4.0V to +10V (absolute maximum +12V to -0.2V). |
| 2 | VO | output | Temperature sensor output voltage, linear +10.0 mV/°C with low impedance (20Ω for 1 mA load), able to drive 500 pF without special precautions. |
| 3 | GND | power_in | Ground; the backside of the die is directly attached to this pin for good thermal conductivity. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23 |
| Category | Sensors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Accuracy at TA=+25°C (LM45C) | -3 | 3 | °C | TA=+25°C | 3 | ||
| Accuracy at TA=TMAX (LM45C) | -4 | 4 | °C | TA=TMAX | 3 | ||
| Accuracy at TA=TMIN (LM45C) | -4 | 4 | °C | TA=TMIN | 3 | ||
| Nonlinearity | -0.8 | 0.8 | °C | TMIN≤TA≤TMAX | 3 | ||
| Sensor Gain (Average Slope) | 9.7 | 10.3 | mV/°C | TMIN≤TA≤TMAX | 3 | ||
| Load Regulation | -35 | 35 | mV/mA | 0≤IL≤+1 mA | 3 | ||
| Line Regulation (first row) | -0.8 | 0.8 | mV/V | +4.0V≤+VS≤+10V | 3 | ||
| Line Regulation (second row) | -1.2 | 1.2 | mV/V | +4.0V≤+VS≤+10V | 3 | ||
| Quiescent Current at +25°C | 120 | μA | +4.0V≤+VS≤+10V, +25°C | 3 | |||
| Quiescent Current over temperature | 160 | μA | +4.0V≤+VS≤+10V | 3 | |||
| Change of Quiescent Current | 2 | μA | 4.0V≤+VS≤10V | 3 | |||
| Minimum Temperature for Rated Accuracy | 2.5 | °C | In circuit of Figure 2, IL=0 | 3 | |||
| Long Term Stability | -0.12 | 0.12 | °C | TJ=TMAX, for 1000 hours | 3 | ||
| Supply Voltage (absolute maximum) | -0.2 | 12 | V | Printed as +12V to −0.2V | 2 | ||
| Output Voltage (absolute maximum) | -1 | V | Upper limit printed as +VS + 0.6V (not a fixed number) | 2 | |||
| Output Current (absolute maximum) | 10 | mA | 2 | ||||
| Storage Temperature | -65 | 150 | °C | 2 | |||
| ESD Susceptibility Human Body Model | 2000 | V | Human body model, 100 pF discharged through 1.5 kΩ | 2 | |||
| ESD Susceptibility Machine Model | 250 | V | Machine model, 200 pF discharged directly into each pin | 2 | |||
| Specified Temperature Range (LM45C) | -20 | 100 | °C | TMIN to TMAX | 2 | ||
| Operating Temperature Range (LM45C) | -40 | 125 | °C | 2 | |||
| Supply Voltage Range | +VS | 4 | 10 | V | 2 | ||
| Thermal Resistance Junction to Ambient, SOT-23 with small heat fin | 260 | °C/W | Junction to ambient, PCB with 2 oz. foil (Figure 15), still air | 2 | |||
| Thermal Resistance SOT-23 no heat sink | 450 | °C/W | Still air, no heat sink | 6 | |||
| Thermal Resistance SOT-23 no heat sink, moving air | 180 | °C/W | Moving air | 6 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LM45CIM3 - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.92 mm, terminals on the pads, 1.12 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lm45cim3-etched.step/lm45cim3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm45cim3.step/lm45cim3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (21 pp, sha256
c69637965e13a710, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).