component
LM4562NA
Public Made by Adomby adom
Texas Instruments Audio Power OpAmps, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM4562NA
Texas Instruments · Audio Power OpAmps · PDIP-8
LM4562NA from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTPUT A | output | Amplifier A output, drives 600Ω loads with ±26mA output current capability and continuous short-circuit protection. |
| 2 | INVERTING INPUT A | input | Amplifier A inverting input, limited to (V-) - 0.7V to (V+) + 0.7V. |
| 3 | NON-INVERTING INPUT A | input | Amplifier A non-inverting input, limited to (V-) - 0.7V to (V+) + 0.7V. |
| 4 | V- | power_in | Negative supply pin, for a total supply voltage of ±2.5V to ±17V (36V absolute maximum between V+ and V-). |
| 5 | NON-INVERTING INPUT B | input | Amplifier B non-inverting input, limited to (V-) - 0.7V to (V+) + 0.7V. |
| 6 | INVERTING INPUT B | input | Amplifier B inverting input, limited to (V-) - 0.7V to (V+) + 0.7V. |
| 7 | OUTPUT B | output | Amplifier B output, drives 600Ω loads with ±26mA output current capability and continuous short-circuit protection. |
| 8 | V+ | power_in | Positive supply pin, for a total supply voltage of ±2.5V to ±17V (36V absolute maximum between V+ and V-). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | VS | 36 | V | VS = V+ - V- | 2 | ||
| Storage Temperature | -65 | 150 | °C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| ESD Susceptibility (HBM) | 2000 | V | Human body model, 100pF through 1.5kΩ | 2 | |||
| ESD Susceptibility (MM) pins 1,4,7,8 | 200 | V | Machine model, pins 1, 4, 7 and 8 | 2 | |||
| ESD Susceptibility (MM) pins 2,3,5,6 | 100 | V | Machine model, pins 2, 3, 5 and 6 | 2 | |||
| Thermal Resistance Junction-Ambient (P package) | θJA | 102 | °C/W | PDIP (P) | 2 | ||
| Operating Temperature | TA | -40 | 85 | °C | TMIN ≤ TA ≤ TMAX | 2 | |
| Supply Voltage Range | VS | -17 | 17 | V | ±2.5V ≤ VS ≤ ±17V | 2 | |
| Total Harmonic Distortion + Noise | THD+N | 3e-05 | 9e-05 | % | AV = 1, VOUT = 3Vrms, RL = 600Ω | 3 | |
| Gain Bandwidth Product | GBWP | 45 | 55 | MHz | 3 | ||
| Slew Rate | SR | 15 | 20 | V/μs | 3 | ||
| Equivalent Input Noise Voltage | en | 0.34 | 0.65 | μVRMS | fBW = 20Hz to 20kHz | 3 | |
| Equivalent Input Noise Density | en | 2.7 | 4.7 | nV/√Hz | f = 1kHz | 3 | |
| Offset Voltage | VOS | -0.7 | 0.1 | 0.7 | mV | 3 | |
| Power Supply Rejection Ratio | PSRR | 110 | 120 | dB | ΔVS = 20V | 3 | |
| Input Bias Current | IB | 10 | 72 | nA | VCM = 0V | 3 | |
| Input Offset Current | IOS | 11 | 65 | nA | VCM = 0V | 3 | |
| Common-Mode Rejection | CMRR | 110 | 120 | dB | -10V<Vcm<10V | 3 | |
| Open Loop Voltage Gain | AVOL | 125 | 140 | dB | -10V<Vout<10V, RL = 600Ω | 3 | |
| Maximum Output Voltage Swing | VOUTMAX | 12.5 | 13.6 | V | RL = 600Ω | 3 | |
| Output Current | IOUT | 23 | 26 | mA | RL = 600Ω, VS = ±17V | 3 | |
| Total Quiescent Current | IS | 10 | 12 | mA | IOUT = 0mA | 4 |
CAD (KiCad official)
- Symbol:
LM4562NA - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
lm4562na-etched.step/lm4562na-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm4562na.step/lm4562na.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (43 pp, sha256
7ee3c8e4db613e3d, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).