component
LM4558N
Public Made by Adomby adom
HGSEMI Operational Amplifier, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM4558N
HGSEMI · Operational Amplifier · DIP-8
LM4558N from HGSEMI, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output of operational amplifier 1. |
| 2 | IN1(-) | input | Inverting input of operational amplifier 1. |
| 3 | IN1(+) | input | Non-inverting input of operational amplifier 1. |
| 4 | Vcc- | power_in | Negative supply (ground in single-supply use); operating supply is ±2.25V to ±16V, absolute maximum ±16V. |
| 5 | IN2(+) | input | Non-inverting input of operational amplifier 2. |
| 6 | IN2(-) | input | Inverting input of operational amplifier 2. |
| 7 | OUT2 | output | Output of operational amplifier 2. |
| 8 | Vcc+ | power_in | Positive supply; operating supply is ±2.25V to ±16V, absolute maximum ±16V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | DIP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VIO | 0.5 | 3 | mV | Ta=25°C, V+/V-=±15V; Rs ≤ 10 kΩ | 3 | |
| Input Offset Current | IIO | 5 | 200 | nA | Ta=25°C, V+/V-=±15V | 3 | |
| Input Bias Current | IB | 100 | 500 | nA | Ta=25°C, V+/V-=±15V | 3 | |
| Large Signal Voltage Gain | Av | 90 | 110 | dB | Ta=25°C, V+/V-=±15V; RL ≥ 2kΩ, Vo=±10V | 3 | |
| Output Voltage Swing | VOM | 12 | 13.5 | V | Ta=25°C, V+/V-=±15V; RL ≥ 2kΩ | 3 | |
| Input Common Mode Voltage Range | VICM | 12 | 13.5 | V | Ta=25°C, V+/V-=±15V | 3 | |
| Common Mode Rejection Ratio | CMR | 80 | 110 | dB | Ta=25°C, V+/V-=±15V; Rs ≤ 10 kΩ | 3 | |
| Supply Voltage Rejection Ratio | SVR | 80 | 110 | dB | Ta=25°C, V+/V-=±15V; Rs ≤ 10 kΩ | 3 | |
| Operating Current | Icc | 6 | 9 | mA | Ta=25°C, V+/V-=±15V | 3 | |
| Slew Rate | SR | 5 | V/ µs | Ta=25°C, V+/V-=±15V; RL ≥ 2kΩ | 3 | ||
| Gain Bandwidth Product | GB | 15 | MHz | Ta=25°C, V+/V-=±15V; f=10kHz | 3 | ||
| Total Harmonic Distortion | THD | 0.0005 | % | Ta=25°C, V+/V-=±15V; Av=20dB, Vo=5V, f=1kHz, RL=2kΩ | 3 | ||
| Input Noise Voltage | VNI | 0.8 | µVrms | Ta=25°C, V+/V-=±15V; RIAA, Rs=2.2kΩ, 30kHz LPF | 3 | ||
| Supply Voltage | V+/V- | -16 | 16 | V | 3 | ||
| Input Voltage | VIC | -15 | 15 | V | 3 | ||
| Differential Input Voltage | VID | -30 | 30 | V | 3 | ||
| Output Current | IO | -50 | 50 | mA | 3 | ||
| Power Dissipation (DIP-8) | PD | 800 | mW | 3 | |||
| Operating Temperature Range | TOPR | -40 | 85 | °C | 3 | ||
| Storage Temperature Range | Tstg | -40 | 125 | °C | 3 | ||
| Lead Temperature (Soldering) | TL | 260 | °C | 10 seconds soldering | 3 | ||
| Operating Voltage (dual supply) | 2.25 | 16 | V | Stated as ±2.25V~±16V in Features list, not in a recommended-operating table | 1 |
CAD (KiCad official)
- Symbol:
LM4558N - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
lm4558n-etched.step/lm4558n-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm4558n.step/lm4558n.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (9 pp, sha256
002d88a3a9a6a9fe, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).