main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lm4510sd: viewers rendered from the public page · Ray
lm4510sd-etched.glb lm4510sd: factory component page (tier=mfr) · Ray
lm4510sd-etched.step lm4510sd: factory component page (tier=mfr) · Ray
lm4510sd-hero.glb lm4510sd: hero GLB from the etched model (keeps the MPN mark) · Ray
lm4510sd-hero.overlay.json lm4510sd: hero GLB from the etched model (keeps the MPN mark) · Ray
lm4510sd.glb Publish 0.1.0 · Ray
lm4510sd.kicad_mod Publish 0.1.0 · Ray
lm4510sd.kicad_sym Publish 0.1.0 · Ray
lm4510sd.lbr Publish 0.1.0 · Ray
lm4510sd.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 11 pins · Ray

LM4510SD

Texas Instruments · DC-DC Converters · WSON-10-EP(3x3)

LM4510SD from Texas Instruments, in a WSON-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW passive Switch pin and drain connection of both the internal NMOS and PMOS devices; absolute maximum is -0.3 V to VOUT+0.3 V when VIN < VOUT.
2 PGND power_in Power ground; PGND to AGND is limited to -0.2 V to 0.2 V.
3 VIN power_in Analog and power supply input with an input range of 2.7 V to 5.5 V (absolute maximum -0.3 V to 6.5 V).
4 EN input Enable logic input: HIGH = enabled, LOW = shutdown; absolute maximum is -0.3 V to 6.5 V.
5 SS passive Soft-start pin that sets the programmable soft-start, limiting inrush current during start-up; absolute maximum is -0.3 V to 6.5 V.
6 AGND power_in Analog ground.
7 COMP passive Compensation network connection; absolute maximum is -0.3 V to 6.5 V.
8 FB input Output voltage feedback connection; absolute maximum is -0.3 V to 6.5 V.
9 N/C unconnected No internal connection.
10 VOUT power_out Internal PMOS source connection for synchronous rectification; absolute maximum is -0.3 V to 21 V and recommended operating output voltage is up to 18 V.
11 DAP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-10-EP(3x3)
Category Power Supply Chip
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN supply voltage (absolute maximum rating) VIN -0.3 6.5 V 4
VOUT voltage (absolute maximum rating) VOUT -0.3 21 V 4
SW pin voltage (upper limit printed as VOUT+0.3 V) SW -0.3 V 4
EN, SS, COMP, FB pin voltage -0.3 6.5 V 4
PGND to AGND voltage -0.2 0.2 V 4
Junction temperature (absolute maximum) TJ-MAX 150 °C 4
Lead temperature (soldering) 260 °C soldering, 10 sec 4
Storage temperature range Tstg -65 150 °C 4
Supply voltage (VIN) recommended operating VIN 2.7 5.5 V 4
Junction temperature (TJ) recommended operating TJ -40 125 °C 4
Output voltage (VOUT) recommended operating VOUT 18 V 4
FB pin voltage VFB 1.24 1.29 V 2.7 V ≤ VIN ≤ 5.5 V, −40°C ≤ TJ ≤ 125°C 5
FB pin bias current IFB 0.05 1.5 µA −40°C ≤ TJ ≤ 125°C 5
NMOS switch RDS(on) RDS(on) 0.45 1.1 Ω ISW = 0.3 A 5
PMOS switch RDS(on) RDS(on) 0.9 1.1 Ω ISW = 0.3 A, VOUT = 10 V 5
NMOS switch current limit ICL 1 1.2 1.8 A 5
Device switching current IQ 2.5 mA EN = 3.6 V, FB = COMP, −40°C ≤ TJ ≤ 125°C 5
Non-switching current IQ 2 mA EN = 3.6 V, FB > 1.29 V, −40°C ≤ TJ ≤ 125°C 5
VOUT bias current IVOUT 50 150 µA VOUT = 20 V, −40°C ≤ TJ ≤ 125°C 5
Shutdown current 0.002 0.05 µA EN = 0 V 5
SW leakage current IL 0.01 0.15 µA SW = 20 V 5
PMOS switch leakage current IVL 0.001 0.1 µA SW = 0 V, VOUT = 20 V 5
Switching frequency fSW 0.85 1.2 MHz −40°C ≤ TJ ≤ 125°C 5
Maximum duty cycle DMAX 88 % FB = 0 V, −40°C ≤ TJ ≤ 125°C 5
Minimum duty cycle DMIN 15 20 % 5
Error amplifier transconductance Gm 70 200 µmho −40°C ≤ TJ ≤ 125°C 5
EN pin bias current IEN 8 µA 0 < EN < 3.6 V, −40°C ≤ TJ ≤ 125°C 6
FB fault protection ON threshold 18 20.7 V −40°C ≤ TJ ≤ 125°C 6
FB fault protection OFF threshold 17 20 V −40°C ≤ TJ ≤ 125°C 6
UVLO ON threshold 2.65 V −40°C ≤ TJ ≤ 125°C 6
UVLO OFF threshold 2.1 V −40°C ≤ TJ ≤ 125°C 6
Soft-start pin current ISS 9 15 µA −40°C ≤ TJ ≤ 125°C 6
Junction-to-ambient thermal resistance RθJA 36 °C/W 5
Junction-to-case (top) thermal resistance RθJC(top) 48.3 °C/W 5
Junction-to-board thermal resistance RθJB 22 °C/W 5
Junction-to-top characterization parameter ψJT 0.6 °C/W 5
Junction-to-board characterization parameter ψJB 22.1 °C/W 5
Junction-to-case (bottom) thermal resistance RθJC(bot) 3.8 °C/W 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper 1. CIN must be placed close to the device and connected directly from VIN to PGND pins. This reduces copper 20

CAD (KiCad official)

  • Symbol: LM4510SD
  • Footprint: Package_SON:VSON-10-1EP_3x3mm_P0.5mm_EP1.2x2mm
  • 3D model: WSON-10-EP(3x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.8 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lm4510sd-etched.step / lm4510sd-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm4510sd.step / lm4510sd.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (29 pp, sha256 f605ff44fabd5af7, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF