Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM4132BQ1MFT3.0

Texas Instruments · Voltage Reference · SOT-23-5

LM4132BQ1MFT3.0 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 N/C unconnected No connect pin, leave floating.
2 GND power_in Ground.
3 EN input Enable pin; apply voltage between 65% VIN and VIN for normal operation, or 0 V to 35% VIN to disable and enter 3 µA shutdown mode.
4 VIN power_in Input supply voltage; must exceed VREF + 400 mV; recommended operating range from (VREF + 400 mV) to 5.5 V.
5 VREF power_in Precision reference output, 3.0 V nominal; capable of delivering up to 20 mA output current.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage initial accuracy (B grade) VREF -0.1 0.1 % LM4132B-3.0 (B Grade - 0.1%); TJ = 25°C, VIN = 5 V, ILOAD = 0 mA (table default) 8
Temperature coefficient (B grade) TCVREF/°C 20 ppm/°C –40°C ≤ TJ ≤ 125°C 8
Supply current IQ 100 µA –40°C ≤ TJ ≤ 125°C 8
Supply current in shutdown IQ_SD 7 µA –40°C ≤ TJ ≤ 125°C 8
Load regulation ΔVREF/ΔILOAD 120 ppm/mA –40°C ≤ TJ ≤ 125°C 8
Dropout voltage VIN – VREF 400 mV –40°C ≤ TJ ≤ 125°C 8
Short-circuit current ISC 75 mA –40°C ≤ TJ ≤ 125°C 8
Enable pin maximum low input level VIL 35 % (VIN) –40°C ≤ TJ ≤ 125°C 8
Enable pin minimum high input level VIH 65 % (VIN) –40°C ≤ TJ ≤ 125°C 8
Maximum voltage on any input -0.3 6 V 3
Power dissipation 350 mW TA = 25°C 3
Lead temperature (soldering) 260 °C 10 sec 3
Lead temperature (vapor phase) 215 °C 60 sec 3
Lead temperature (infrared) 220 °C 15 sec 3
Storage temperature Tstg -65 150 °C 3
ESD human-body model (HBM) V(ESD) -2000 2000 V Human-body model (HBM), per AEC Q100-002 4
Maximum input supply voltage VIN 5.5 V 4
Maximum load current (LM4132 row) ILOAD 20 mA LM4132 row (not LM4132-3.3-Q1) 4
Junction temperature TJ -40 125 °C 4
Nominal output voltage VOUT 3 V LM4132-3 (VOUT = 3 V) section 8
Supply current IQ 60 µA 8
Supply current in shutdown IQ_SD 3 µA EN = 0 V 8
Line regulation ΔVREF/ΔVIN 70 ppm/V VREF + 400 mV ≤ VIN ≤ 5.5 V 8
Load regulation ΔVREF/ΔILOAD 25 ppm/mA 0 mA ≤ ILOAD ≤ 20 mA 8
Long-term stability ΔVREF 50 ppm 1000 Hrs 8
Thermal hysteresis 75 ppm –40°C ≤ TJ ≤ 125°C 8
Dropout voltage VIN – VREF 175 mV ILOAD = 10 mA 8
Output noise voltage VN 285 µVPP 0.1 Hz to 10 Hz 8
Junction-to-ambient thermal resistance RθJA 164.1 °C/W DBV (SOT-23) 5 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 115.3 °C/W DBV (SOT-23) 5 pins 4
Junction-to-board thermal resistance RθJB 27.1 °C/W DBV (SOT-23) 5 pins 4
Junction-to-top characterization parameter ψJT 12.8 °C/W DBV (SOT-23) 5 pins 4
Junction-to-board characterization parameter ψJB 26.6 °C/W DBV (SOT-23) 5 pins 4

CAD (KiCad official)

  • Symbol: LM4132BQ1MFT3.0
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: lm4132bq1mft3-0-etched.step / lm4132bq1mft3-0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm4132bq1mft3-0.step / lm4132bq1mft3-0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (44 pp, sha256 4bd8402ff026fdf1, retrieved 2026-10-07, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF