Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM4132AMFX-3.0

Texas Instruments · Voltage Reference · SOT-23-5

LM4132AMFX-3.0 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 N/C unconnected No connect pin; leave floating.
2 GND power_in Ground reference for the device.
3 EN input Enable pin: the reference is enabled when EN is between 65% of VIN and VIN, and disabled when EN is between 0 V and 35% of VIN; EN must not be greater than VIN.
4 VIN power_in Input supply, which must be at least VREF + 400 mV at ILOAD ≤ 10 mA and must not exceed 5.5 V.
5 VREF power_out Precision reference voltage output, rated for a maximum load current of 20 mA for the LM4132 (25 mA for LM4132-3.3-Q1).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage initial accuracy -0.05 0.05 % LM4132A-3.0 (A Grade - 0.05%) 8
Temperature coefficient TCVREF/°C 10 ppm/°C 0°C ≤ TJ ≤ 85°C 8
Temperature coefficient TCVREF/°C 20 ppm/°C -40°C ≤ TJ ≤ 125°C 8
Supply current IQ 100 µA -40°C ≤ TJ ≤ 125°C 8
Supply current in shutdown IQ_SD 7 µA -40°C ≤ TJ ≤ 125°C 8
Load regulation ΔVREF/ΔILOAD 120 ppm/mA -40°C ≤ TJ ≤ 125°C 8
Dropout voltage VIN, VREF 400 mV -40°C ≤ TJ ≤ 125°C 8
Enable pin maximum low input level VIL 35 % (VIN) -40°C ≤ TJ ≤ 125°C 8
Enable pin minimum high input level VIH 65 % (VIN) -40°C ≤ TJ ≤ 125°C 8
Maximum voltage on any input -0.3 6 V 3
Power dissipation 350 mW TA = 25°C 3
Lead temperature (soldering, 10 sec) 260 °C soldering, 10 sec 3
Vapor phase (60 sec) 215 °C vapor phase, 60 sec 3
Infrared (15 sec) 220 °C infrared, 15 sec 3
Storage temperature Tstg -65 150 °C 3
Maximum input supply voltage 5.5 V 4
Junction temperature TJ -40 125 °C 4
Supply current IQ 60 µA 8
Supply current in shutdown IQ_SD 3 µA EN = 0 V 8
Line regulation ΔVREF/ΔVIN 70 ppm/V VREF + 400 mV ≤ VIN ≤ 5.5 V 8
Load regulation ΔVREF/ΔILOAD 25 ppm/mA 0 mA ≤ ILOAD ≤ 20 mA 8
Long-term stability ΔVREF 50 ppm 1000 Hrs 8
Thermal hysteresis 75 ppm -40°C ≤ TJ ≤ 125°C 8
Dropout voltage VIN, VREF 175 mV ILOAD = 10 mA 8
Output noise voltage VN 285 µVPP 0.1 Hz to 10 Hz 8
Short-circuit current ISC 75 mA -40°C ≤ TJ ≤ 125°C 8
Junction-to-ambient thermal resistance RθJA 164.1 °C/W 4
Junction-to-case (top) thermal resistance RθJC(top) 115.3 °C/W 4
Junction-to-board thermal resistance RθJB 27.1 °C/W 4
Junction-to-top characterization parameter ψJT 12.8 °C/W 4
Junction-to-board characterization parameter ψJB 26.6 °C/W 4

CAD (KiCad official)

  • Symbol: LM4132AMFX-3.0
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lm4132amfx-3-0-etched.step / lm4132amfx-3-0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm4132amfx-3-0.step / lm4132amfx-3-0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (44 pp, sha256 4bd8402ff026fdf1, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF