main
Ray
Publish 0.1.0
854b1b4
LM4128CMF-3.3
Texas Instruments · Voltage References · SOT-23-5
LM4128CMF-3.3 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | N/C | unconnected | No connect pin; leave floating. |
| 2 | GND | power_in | Ground reference pin. |
| 3 | EN | input | Enable pin; the datasheet's enable levels are VIL maximum 35% and VIH minimum 65% (given as %V), and supply current drops to 3 µA typical in shutdown with EN = 0V. |
| 4 | VIN | power_in | Input supply; maximum input supply voltage is 5.5V, and the absolute maximum voltage on any input is -0.3 to 6V. |
| 5 | VREF | power_out | Reference voltage output; maximum load current is 20 mA and output short-circuit duration is indefinite. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage initial accuracy (LM4128C-3.3, C grade) | VREF | -0.5 | 0.5 | % | 7 | ||
| Temperature coefficient (LM4128C-3.3) | TCVREF / °C | 100 | ppm / °C | 7 | |||
| Supply current | IQ | 60 | 100 | µA | 7 | ||
| Supply current in shutdown | IQ_SD | 3 | 7 | µA | EN = 0V | 7 | |
| Load regulation | ΔVREF/ΔILOAD | 25 | 120 | ppm / mA | 0 mA ≤ ILOAD ≤ 20 mA | 7 | |
| Dropout voltage | VIN - VREF | 175 | 400 | mV | ILOAD = 10 mA | 7 | |
| Enable pin maximum low input level | VIL | 35 | %V | 7 | |||
| Enable pin minimum high input level | VIH | 65 | %V | 7 | |||
| Line regulation | ΔVREF/ΔVIN | 85 | ppm / V | VREF + 400 mV ≤ VIN ≤ 5.5V | 7 | ||
| Output noise voltage | VN | 310 | µVPP | 0.1 Hz to 10 Hz | 7 | ||
| Long term stability | ΔVREF | 50 | ppm | 1000 Hrs | 7 | ||
| Thermal hysteresis | 75 | ppm | -40°C ≤ TJ ≤ +125°C | 7 | |||
| Short circuit current | ISC | 75 | mA | 7 | |||
| Maximum voltage on any input | -0.3 | 6 | V | 2 | |||
| Power dissipation (TA = 25°C) | PDiss | 350 | mW | TA = 25°C, without PCB copper enhancements | 2 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 2 | ||
| Lead temperature, soldering (10 sec) | 260 | °C | soldering, 10 sec | 2 | |||
| Lead temperature, vapor phase (60 sec) | 215 | °C | vapor phase, 60 sec | 2 | |||
| Lead temperature, infrared (15 sec) | 220 | °C | infrared, 15 sec | 2 | |||
| ESD susceptibility, Human Body Model | 2 | kV | Human Body Model | 2 | |||
| Maximum input supply voltage | VIN | 5.5 | V | 2 | |||
| Maximum load current | ILOAD | 20 | mA | 2 | |||
| Junction temperature range | TJ | -40 | 125 | °C | 2 | ||
| Junction-to-ambient thermal resistance (SOT-23) | θJ-A | 220 | °C/W | SOT-23 package | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | ESD Susceptibility(3) Human Body Model 2 kV (1) Absolute Maximum Ratings indicate limits beyond which damage may occur to the device. Operating Ratings indicate conditions for | 2 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LM4128CMF-3.3 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lm4128cmf-3-3-etched.step/lm4128cmf-3-3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm4128cmf-3-3.step/lm4128cmf-3-3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
dba8a4a80be91bcb, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# LM4128CMF-3.3
**Texas Instruments** · Voltage References · SOT-23-5
LM4128CMF-3.3 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | N/C | unconnected | No connect pin; leave floating. |
| 2 | GND | power_in | Ground reference pin. |
| 3 | EN | input | Enable pin; the datasheet's enable levels are VIL maximum 35% and VIH minimum 65% (given as %V), and supply current drops to 3 µA typical in shutdown with EN = 0V. |
| 4 | VIN | power_in | Input supply; maximum input supply voltage is 5.5V, and the absolute maximum voltage on any input is -0.3 to 6V. |
| 5 | VREF | power_out | Reference voltage output; maximum load current is 20 mA and output short-circuit duration is indefinite. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage initial accuracy (LM4128C-3.3, C grade) | VREF | -0.5 | | 0.5 | % | | 7 |
| Temperature coefficient (LM4128C-3.3) | TCVREF / °C | | | 100 | ppm / °C | | 7 |
| Supply current | IQ | | 60 | 100 | µA | | 7 |
| Supply current in shutdown | IQ_SD | | 3 | 7 | µA | EN = 0V | 7 |
| Load regulation | ΔVREF/ΔILOAD | | 25 | 120 | ppm / mA | 0 mA ≤ ILOAD ≤ 20 mA | 7 |
| Dropout voltage | VIN - VREF | | 175 | 400 | mV | ILOAD = 10 mA | 7 |
| Enable pin maximum low input level | VIL | | | 35 | %V | | 7 |
| Enable pin minimum high input level | VIH | 65 | | | %V | | 7 |
| Line regulation | ΔVREF/ΔVIN | | 85 | | ppm / V | VREF + 400 mV ≤ VIN ≤ 5.5V | 7 |
| Output noise voltage | VN | | 310 | | µVPP | 0.1 Hz to 10 Hz | 7 |
| Long term stability | ΔVREF | | 50 | | ppm | 1000 Hrs | 7 |
| Thermal hysteresis | | | 75 | | ppm | -40°C ≤ TJ ≤ +125°C | 7 |
| Short circuit current | ISC | | 75 | | mA | | 7 |
| Maximum voltage on any input | | -0.3 | | 6 | V | | 2 |
| Power dissipation (TA = 25°C) | PDiss | | | 350 | mW | TA = 25°C, without PCB copper enhancements | 2 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 2 |
| Lead temperature, soldering (10 sec) | | | | 260 | °C | soldering, 10 sec | 2 |
| Lead temperature, vapor phase (60 sec) | | | | 215 | °C | vapor phase, 60 sec | 2 |
| Lead temperature, infrared (15 sec) | | | | 220 | °C | infrared, 15 sec | 2 |
| ESD susceptibility, Human Body Model | | | | 2 | kV | Human Body Model | 2 |
| Maximum input supply voltage | VIN | | | 5.5 | V | | 2 |
| Maximum load current | ILOAD | | | 20 | mA | | 2 |
| Junction temperature range | TJ | -40 | | 125 | °C | | 2 |
| Junction-to-ambient thermal resistance (SOT-23) | θJ-A | | 220 | | °C/W | SOT-23 package | 2 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | | ESD Susceptibility(3) Human Body Model 2 kV (1) Absolute Maximum Ratings indicate limits beyond which damage may occur to the device. Operating Ratings indicate conditions for | 2 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `LM4128CMF-3.3`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `lm4128cmf-3-3-etched.step` / `lm4128cmf-3-3-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm4128cmf-3-3.step` / `lm4128cmf-3-3.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm4128cmf-3.3.pdf) (34 pp, sha256 `dba8a4a80be91bcb`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/lm4128cmf-3-3-datasheet.pdf)