Generated by kicad-footprint-generator · KiCad file format 20260206
LM4128BMFX-2.5
Texas Instruments · Voltage References · SOT-23-5
LM4128BMFX-2.5 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | N/C | unconnected | No connect pin; leave floating. |
| 2 | GND | power_in | Ground reference pin for the device. |
| 3 | EN | input | Enable pin; the Electrical Characteristics table specifies a maximum low input level of 35 %V and a minimum high input level of 65 %V, and with EN = 0 V the supply current in shutdown is 3 µA typical and 7 µA maximum. |
| 4 | VIN | power_in | Input supply; the datasheet gives an operating range of VREF + 400 mV to 5.5 V at 10 mA load and a maximum input supply voltage of 5.5 V. |
| 5 | VREF | power_out | Reference voltage output, rated for a maximum load current of 20 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Initial Accuracy (B Grade, LM4128B-2.5) | VREF | -0.2 | 0.2 | % | 3 | ||
| Temperature Coefficient (LM4128B-2.5) | TCVREF / °C | 75 | ppm / °C | 5 | |||
| Supply Current | IQ | 60 | 100 | µA | 5 | ||
| Supply Current in Shutdown | IQ_SD | 3 | 7 | µA | EN = 0V | 5 | |
| Enable Pin Maximum Low Input Level | VIL | 35 | %V | 5 | |||
| Enable Pin Minimum High Input Level | VIH | 65 | %V | 5 | |||
| Load Regulation | ΔVREF/ΔILOAD | 25 | 120 | ppm / mA | 0 mA ≤ ILOAD ≤ 20 mA | 5 | |
| Line Regulation | ΔVREF/ΔVIN | 50 | ppm / V | VREF + 400 mV ≤ VIN ≤ 5.5V | 5 | ||
| Long Term Stability | ΔVREF | 50 | ppm | 1000 Hrs | 5 | ||
| Thermal Hysteresis | 75 | ppm | -40°C ≤ TJ ≤ +125°C | 5 | |||
| Output Noise Voltage | VN | 275 | µVPP | 0.1 Hz to 10 Hz | 5 | ||
| Short Circuit Current | ISC | 75 | mA | 5 | |||
| Maximum Voltage on any Input | -0.3 | 6 | V | 2 | |||
| Power Dissipation | 350 | mW | TA = 25°C, without PCB copper enhancements | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature Soldering | 260 | °C | 10 sec | 2 | |||
| Lead Temperature Vapor Phase | 215 | °C | 60 sec | 2 | |||
| Lead Temperature Infrared | 220 | °C | 15 sec | 2 | |||
| ESD Susceptibility | 2 | kV | Human Body Model | 2 | |||
| Maximum Input Supply Voltage | VIN | 5.5 | V | 2 | |||
| Maximum Load Current | ILOAD | 20 | mA | 2 | |||
| Junction Temperature Range | TJ | -40 | 125 | °C | 2 | ||
| Junction to Ambient Thermal Resistance (SOT-23) | θJ-A | 220 | °C/W | SOT-23 package, without PCB copper enhancements | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | ESD Susceptibility(3) Human Body Model 2 kV (1) Absolute Maximum Ratings indicate limits beyond which damage may occur to the device. Operating Ratings indicate conditions for | 2 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LM4128BMFX-2.5 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lm4128bmfx-2-5-etched.step/lm4128bmfx-2-5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm4128bmfx-2-5.step/lm4128bmfx-2-5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
dba8a4a80be91bcb, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).